Ardes AR8U20 Fog Digital Fog User Manual
- June 15, 2024
- Ardes
Table of Contents
Ardes AR8U20 Fog Digital Fog
Warnings
ATTENTION : read this booklet carefully it contains important
instructions for safe installation, use, and maintenance.
Important instructions are to be kept for future reference.
This appliance can be used by children aged 8 years and above and persons with
reduced physical, sensory, or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning the
use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance
shall not be done by children without supervision.
If the power cable gets damaged, it has to be replaced only at a service
center approved by the manufacturer in order to avoid a hazard
- Be aware that high humidity levels may encourage the growth of biological organisms in the environment.
- Do not permit the area around the humidifier to become damp or wet. If dampness occurs, turn the output of the humidifier down. If the humidifier output volume cannot be turned down, use the humidifier intermittently. Do not allow absorbent materials, such as carpeting, curtains, drapes, or tablecloths, to become damp.
- Unplug the appliance during filling and cleaning.
- Do not leave water in the reservoir when the appliance is not in use.
- Empty and clean the humidifier before storage. Clean the humidifier before next use.
Clean the water tank every three days
WARNING: Micro-organisms that may be present in the water or in the environment where the appliance is used or stored, can grow in the water reservoir and be blown in the air causing very serious health risks when the water is not renewed and the tank is not cleaned properly every 3 days.
- Empty the tank and refill every third day. Before refilling, clean it with fresh tap water. Remove any scale, deposits, or film tha has formed on the sides of the tank or on interior surfaces, and wipe all surfaces dry.
Keep handy the guarantee, receipt of payment and these instructions for future
use and reference.
After removing the packaging, check the appliance for any signs of damage. In
case of visible damage, do not use it and contact a qualified technician. Do
not leave parts of the packaging within the reach of children. This appliance
is not a children’s toy: it is an electrical device and must be treated with
the necessary caution. Before connecting the appliance, make sure that the
power supply voltage matches the indication on the data plate. If the plug and
socket are not compatible, the socket has to be replaced with a suitable type
by skilled persons. Do not use adapters or extension cables that do not meet
current safety standards or that exceed the current carrying capacity limits.
When you don’t use the appliance disconnect it from the power supply and
assure that the interruptor is off. Do not tug on the power cable or on the
appliance itself to remove the plug from the socket.
The use of any electrical appliance requires that a number of basic rules be
observed, namely:
- Never touch the appliance with wet or humid hands.
- Do not leave the appliance exposed to atmospheric agents (rain, sun).
- Do not subject it to rough handling.
In case of a breakdown or malfunction of the appliance, disconnect it at once.
Do not attempt to repair it, but take it to a service center approved by the
manufacturer. If you decide you do not want to use this appliance any longer,
disable it by cutting the power cable – of course, after disconnecting it from
the socket. The power cable should be extended to its full length to avoid
overheating. For safety reasons, the appliance should never be opened.
The appliance has been designed and manufactured to operate as a humidifier in
the home. Any other use is considered inappropriate and dangerous
- Do not use the appliance out of doors.
- Do not direct the steam jet against people, objects or the walls. Take care never to turn the appliance upside down while it is in use.
Place the appliance on a fiat surface during use. Even if the appliance runs
dry, this does not damage it nor does it consume power.
In order to avoid irreparable damage to the appliance and malfunctioning,
never pour any other substance than water (e.g. salt) into the reservoir. If
this should be done by mistake, rinse it out at once with tap water. Do not
direct the flow of steam towards electrical appliances, or other materials
(eg., furnishing) not resistant to water or humidity.
Instructions for use (mod. AR8U10)
(see drawing at the end of the booklet
1 – Nozzle | 6 – Bowl |
---|---|
2 – Headcover | 7 – Transducer |
3 – Handle | 8 – Operation button / |
4 – Water tank | speed delivery |
5 – Water tank cover | 9 – Filter |
Remove the water tank, turn it upside down, open the cover by turning
counterclockwise, and fill the tank with clean water (cold water, 40°C max,
previously boiled). Close the tank and place it over the base carefully.
Settle the nozzle and top cover on top. Pressing the operation button, it will
light up in fuchsia and the humidifier will start to steam; each pulse will
increase the speed the button will change color from fuchsia to green (medium
speed) and blue (top speed). When the theater finishes, the button turns red
and the unit beeps 5 times
Instructions for use (mod. AR8U20)
(see drawing at the end of the booklet)
1 – Nozzle | 7 – Bowl |
---|---|
2 – Headcover | 8 – Transducer |
3 – Handle | 9 – Internal lamp |
4 – Water tank | 10 – Display |
5 – Water tank cover | 11 – Operation button |
6 – Hygrometer. | 12 – Aroma box |
Remove the water tank, turn it upside down, and open the cover by turning
counterclockwise and fill the tank with clean water (cold water, 40°C max,
previously boiled). Close the tank and place it over the base carefully.
Settle the nozzle and top cover on top. Plugging the unit, the temperature
appears on the display. Press the operation button (A), the device will start
emitting steam continuously; by pressing the button for the steam control (B),
you can vary the intensity of the steam up to 4 levels. During continuous
operations, it is possible to set the AUTO function. The appliance detects
automatically the suitable humidity level related to the ambient temperature
and it sets the nebulization speed:
- high speed if the air humidity is less than suitable level;
- low speed if the air humidity is close to or higher than the suitable level.
Press the button (C) to set the desired degree of humidity; each pulse increases by 5% starting from a minimum of 40% up to a maximum of 75%. If you set the humidity level with the button (C) you cannot adjust the steam dispensing speed because the unit adjusts the steam automatically. To adjust the steam level, press the button (C) to go back to continuous operation mode. Press the button (D) if you want to ionize the air. Pressing the TIMER button (E) you can adjust the time when the product should switch off up to a maximum of 12 hours. When the water is not enough to operate, a red light on the display indicates the lack of water. You can use the product with essential oils or balsamic essences. Press on the drawer at the bottom of the product, remove it and deposit a few drops on the sponge. Close the drawer by inserting it into the housing again.
Maintenance
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it. To reduce bacteria and scale residues, empty the water
tank every day after use. In order to clean the appliance, use a soft or
slightly damp cloth. Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from Never
use alcohol or chemical products to clean the appliance. NEVER IMMERSE THE
APPLIANCE IN THE WATER.
Preferably use cold water up to 40°C pre-boiled. Clean the transducer and the
water tank every 3 days.. Frequently change the water in the tank.
Take the water out of the tank and dry it if the product is not used for a
long time
To clean the transducer:
- clean the surface of the transducer with vinegar and wait for 2-5 minutes.
- Rinse the transducer with clean water. Never use sharp or hard objects to clean the transducer.
How to clean the bowl:
- for daily cleaning, rinse with clean water and dry with a soft cloth. To remove any limescale or to make a periodic cleaning of the appliance proceed as follows:
- pour a solution of water and vinegar (in equal parts) into the bowl and the tank; leave the solution to work for at least 6 hours.
- Drain and rinse with clean water and dry. If the product is not used for a long time dry both the bowl and tank, remove the filter (located underneath the product), and dry it completely; wrap it and store it in a dry place.
DISPOSAL
PACKAGING
In order to respect the environment, packaging material must be disposed of properly in accordance with separate collection. Check local regulations.
USER INFORMATION
“Implementation of Directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE)”, pertaining to reduced use of
hazardous substances in electrical and electronic equipment, as
well as to waste disposal”. The symbol of the crossed-out wheelie bin on the
equipment or on its packaging indicates that the product must be disposed of
separately from other waste at the end of its service life. The user must
therefore take the dismissed equipment to suitable separate collection centres
for electrical and electronic waste. For more details, please contact the
appropriate local authority. Suitable segregated collection of the equipment
for subsequent recycling, treatment, or environmentally-friendly disposal
helps prevent damage to the environment and to human health and encourages the
reuse and/or recycling of the materials that make up the equipment. Abusive
disposal of the product by the user shall result in the application of
administrative fines in accordance with the laws in force.
GUARANTEE
Terms and Conditions
The guarantee is valid for 24 months. This guarantee applies only if it has been duly filled in and is submitted with the receipt showing the date of purchase. The guarantee covers the replacement or repair of parts making up the appliance that was faulty at the source due to manufacturing faults. After the guarantee has expired, the appliance will be repaired against payment. The manufacturer declines any responsibility for damage to persons, animals or property due to misuse of the appliance and failure to observe the directions contained in the instructions
Limits
All rights under this guarantee and any responsibility on our part will be
voided if the appliance has been:
- mishandled by unauthorized persons
- improperly used, stored, or transported. The guarantee does not cover damage to the outward appearance or any other that does not prevent regular operation. If any faults should be found despite the care taken in selecting the materials and in creating the product, or if any information or advice are required, please contact your local dealer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>