PEDROLLO PRESFLO MULTI Automatic Control Device User Guide
- July 18, 2024
- pedrollo
Table of Contents
PEDROLLO PRESFLO MULTI Automatic Control Device
INSTALLATION AND USE
PRESFLO MULTI is an electronic device designed to control and protect single- phase domestic pumps with a power capacity of up to 2 HP. It is ideal for water supply and pressure boosting in residential settings, as well as for small-scale irrigation applications.
PRODUCT DESCRIPTION
※ PRESFLO MULTI features a pressure sensor and a flow sensor linked to an
electronic system that automatically activates the pump when a faucet’s
opening lowers the pressure below a specified level and deactivates it when
the flow stops or dips under 2 l/min.
※ PRESFLO MULTI is also equipped with:
– Pressure Gauge
– integrated 1-litre expansion tank useful in case of leaks and to protect
against water hammer;
– option to adjust the restart pressure from 1 bar to 5 bar;
– capability to set the maximum current up to 16 A
The integrated electronics protect the pump from:
※ dry running
※ frequent start-ups due to leaks in the system;
※ Overcurrent
DIMENSIONS AND WEIGHT
TECHNICAL DATA
TYPE Single-phase| P2| Power supply| Continuous duty
current
---|---|---|---
kW| HP| Volt| Hz
PRESFLO MULTI| 1.5| 2| 230| 50/60| 13 A
STANDBY
DRY-RUN
PROTECTION
EXCESSIVE
START
OVERLOAD
PRESFLO MULTI features 2 LED indicators to show the system’s operating status and alerting to any issues through blinking patterns. A guide on the electrical panel helps to identify specific problems indicated by the LEDs.
PERFORMANCE RANGE
※ Maximum volume capacity: 170 l/min (10 m3/h)
※ Adjustable restart pressure (factory setting 2 bar)
※ maximum current: adjustable up to 16 A.
APPLICATION LIMITS
※ Liquid temperature up to +40 °C
※ Ambient temperature up to +40 °C
※ Maximum operating pressure 8 bar
※ Protection rating: IP 65
PERFORMANCE AND SAFETY STANDARDS
The electronic circuit board inside the PRESFLO MULTI has passed the most rigorous EMC tests for electromagnetic compatibility.
AVAILABLE UPON REQUEST
※ Version with power cable with Schuko plug and pump connection cable
ADJUSTMENT
PRESFLO MULTI is equipped with two trimmers and a screwdriver for simple and
intuitive adjustment of:
– restart pressure from 1 bar to 5 bar
– amperometric protection from 4 to 16 A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>