Bay Alarm Medical SOS Smartwatch Medical Alert System Smartwatch User Guide

June 6, 2024
Bay Alarm Medical

SOS Smartwatch
Quick Start Guide

Bay Alarm Medical SOS Smartwatch Medical Alert System
-

SOS Smartwatch Package Items

Bay Alarm Medical SOS Smartwatch Medical Alert System
-item

Understanding Your SOS Smartwatch

Bay Alarm Medical SOS Smartwatch Medical Alert System -SOS
Button

Action How To
To Place An Emergency Call Press and hold the **down for 5

seconds until the watch places the call.
On/Off| Press and hold the ****to turn ON or OFF the watch. It is HIGHLY RECOMMENDED that the watch is never turned off in case of an emergency.
Sleep Mode| Press to turn off the screen. Press again to turn on the screen
To Go Back| Press & release the **

Understanding The Watch Screens

Screen What It Is Description
Home Screensaver This is the default screensaver and main screen.

Bay Alarm Medical -icon4| Main Menu| The Main Menu has 3 icons:

  1. (Yellow Phone -currently unavailable
  2. Blue T Settings – for manufacturer use
  3. Red Step Counter

Bay Alarm Medical -icon5| Settings Menu| The Settings Menu is visible but currently unavailable for customer use.
| Emergency Call Screen| When an emergency call is made by pressing and holding the SOS Button, the Emergency Call Screen will show, indicating how long the SOS Button needs to be held.
| Steps Tracker| The Step Tracker screen shows the number of steps taken. On this screen, the step records and the step settings can also be accessed.
Bay Alarm Medical -icon8| Step Tracker Settings| This is the Step Tracker Settings where a daily step goal can be set up.
Bay Alarm Medical -icon9| Battery Status| To check the battery life swipe the screen from the top to bottom.

SOS Smartwatch Quick Start Guide

1) Turning On/OFF The Watch

  1.  On the right-hand side of the watch, press and hold the Power Button until you feel the watch vibrate or start tonight on.
  2. Once the watch is on, the watch will show the image above to indicate it is loading and setting up.
  3. The watch screen will display the screen above indicates that it is ready to use.

Bay Alarm Medical SOS Smartwatch Medical Alert System
-Watch

It is HIGHLY RECOMMENDED that the watch is never turned off in case of an emergency.

2) Putting On & Adjusting the Watch

  1. Push the Free Loop off the other strap so it is only on one strap.

  2. There are two buttons on the side of the Metal Clasp. Press and hold both of them at the same time and lift up.

  3. Place the watch on your wrist and close the Metal Clasp back into place.
    Bay Alarm Medical SOS Smartwatch Medical Alert System
-Putting

  4. To adjust the band size, lift the Metal Clasp and detach the bottom strap from the Stopper. Pull the strap towards the other strap to tighten or pull away to loosen the strap.

  5. When the straps are adjusted to the desired length, place the Stopper back into the adjustment hole of the strap.

  6. Snap the Metal Clasp back to the strap of the watch.

Bay Alarm Medical SOS Smartwatch Medical Alert System
-Putting1

3) Placing An Emergency Call

  1.  Locate the SOS button on the left-hand side of the watch.
  2. Press and hold the SOS button for 5 seconds. After 5 seconds, the watch should be making the call to the monitoring center.
  3. Once connected, an operator will ask if help is needed through the watch. Respond according to your situation. If there is no response from you, the operator will send emergency personnel.

Bay Alarm Medical SOS Smartwatch Medical Alert System
-Placing

4) Charging The Watch

  1. Connect the Cable to the Power Supply.

  2. Plug the other end of the cable into the port of the back Docking CradleCharger. Then plug the Power Supply into the outlet.

  3. Place the watch onto the Docking Cradle Charger aligning the 5 prong port of the watch to that of the DockingCradle.
    Bay Alarm Medical SOS Smartwatch Medical Alert System
-Charging

  4. Check if the light on the Docking Cradle lights up red. This means the watch battery is charging.

  5. Once the Docking Station light turns green, the watch is ready to use.

Bay Alarm Medical SOS Smartwatch Medical Alert System
-Charging1

5) Tracking Your Steps

  1. On the main screen, tap the screen once. It should direct you to the MainMenu screen.

  2. Then press the Step Counter button (red icon with the white shoe).

  3. The Step Counter screen should show. To set a personal step goal, tap on the gear icon
    Bay Alarm Medical SOS Smartwatch Medical Alert System
-Tracking

  4. Tap the slide button to the right next to “Measure.” Then press either the “-” or “+” to adjust to your desired goal.

  5. Press the SOS button to go back to your step counter. To see your personal record, tap Record on the bottom right.

Bay Alarm Medical SOS Smartwatch Medical Alert System -Tracking
3

6) Changing The Home Screensaver

  1.  Press and hold the center of the main screen.
  2. The screen image should minimize. Swipe left or right to look through the options. Below are the options:
  3. When you see a screen you like, tap the center and it should be set.

Bay Alarm Medical SOS Smartwatch Medical Alert System
-Screensaver

Bay Alarm Medical -icon12

Need Help? Call 1-877-522-9633

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals