ETERNICO MSB550B Wireless Mouse User Manual

**ETERNICO MSB550B Wireless Mouse User Manual

**

THANK YOU FOR CHOOSING US!

We value your trust. We hope that you will be happy with our product, and as excited about it as we are. We try to offer products of the highest quality that satisfy even the most demanding requirements. If you are satisfied, it would make us very happy if you chose us again the next time you make a purchase.

We are environmentally conscious, therefore we use special eco-friendly packaging. Please recycle!

Recycling and Environmental Protection

We try to avoid using plastic packaging and film and only use them when they are absolutely necessary to protect the product. So how are we different?

Packaging you can eat… Well, almost. 🙂

• We use ink made from soybeans as opposed to classic petroleum-based ink.
• The majority of our packaging is made from 100% recyclable paper.
• We limit the use of adhesives. If absolutely necessary, we make sure to choose only water-soluble ones.

We think globally, which means that we actively search for eco-friendly solutions. We keep an eye on trending technology and place findings of the scientific community into practice. We don‘t just try to meet quotas and mandates, we aim to exceed them.

THIS PACKAGE IS 100% RECYCLABLE.

TECHNICAL SPECIFICATIONS

later, Android
Number of connected devices| 3
Sleep mode| Yes, after 8 minutes of inactivity
Dimensions| 124.2 × 82.3 × 49.1 mm
Weight| 110 g (without battery)

OVERVIEW

1. Left mouse button
2. Centre wheel
3. Side buttons forward / backward
4. DPI button (sensor sensitivity setting)
5. Right mouse button
6. Optical sensor
7. Battery compartment and USB receiver silo cover
8. Button for switching operating modes
9. ON/OFF switch

INSTRUCTIONS

Inserting the battery

Remove the battery compartment cover and insert a new AA battery. Observe the polarity markings on the bottom of the battery compartment. Replace the cover.

The process is the same when replacing batteries, except that old batteries need to be removed first.

Turning mouse On/Off

Turn the power switch on the bottom of the mouse to the “ON” position to turn on the mouse. LED indicator 2.4G starts flashing.

Turn the power switch on the bottom of the mouse to the “OFF” position when the mouse is not in use.

Operating mode selection

The wireless mouse allows you to set the operating modes 2.4G, Bluetooth 1 or Bluetooth 2. The default operating mode is 2.4G.

1. Press the operation mode selection button repeatedly to select 2.4G, BT1 or BT2 mode. The LED indicator of the selected mode flashes once.
2. Press and hold the operating mode selection button for more than 3 seconds (and until the LED status light starts flashing rapidly) to enter the the Bluetooth operating mode. The pairing time is 3 minutes.
3. On your computer, start searching for devices by clicking “Add device – Bluetooth”. Select the device named AET-MSB550B from the list of Bluetooth devices found.
4. If the pairing was successful, the LED indicator of the selected operating mode will go out after approx. 2 seconds and the mouse cursor will appear on the display

Installation

The USB receiver is located inside the mouse. Remove the battery compartment cover andremove the USB receiver. Replace the cover. Insert the USB receiver into the USB-A port of your computer. The mouse is installed automatically so you can quickly and comfortably operate the mouse.  Once the cursor appears on the monitor, the mouse is ready to use.

Sensor sensitivity setting

Press the DPI button repeatedly to adjust the sensor sensitivity. The default value is 1,600 DPI. If you select 1,000 DPI sensitivity, the red LED on the left side of the center wheel flashes once; if you select 1,600 DPI sensitivity, it flashes twice; if you select 2,400 DPI, it flashes three times.

CLEANING

Keep the wireless mouse clean. Turn the switch to the “OFF” position before cleaning. Use only a dry, clean cloth for cleaning. Do not use harsh cleaners, solvents, gasoline or other similar substances. Never wash the wireless mouse with water and do not immerse it in water. If you will not be using the wireless mouse for an extended period of time, set the power switch to OFF.

SAFETY INFORMATION

• Read the safety and operating instructions. Failure to observe the safety and operating instructions can endanger people or damage the device. And it may void your warranty.
• This product is only suitable for household use.
• This product is not a toy. It may contain small components. Please keep away from children.
• Do not use or leave the product in a dusty or otherwise polluted environment.
• Do not leave the product in high or low ambient temperatures. Keep the product in a dry environment.
• Keep this product away from heat sources such as stoves or direct sunlight. No naked flame sources, such as lighted candles, should be placed on the product.
• Do not expose the product to dripping or splashing water or other liquids. Do not place containers filled with water, such as vases, on the product.
• Do not touch the product with wet hands.
• This product is not considered a light fixture. Make sure that continuous operation does not exceed six hours.
• Never look into the light for a long time. There is a risk of serious eye damage.
• Do not disassemble the product. Attempting to modify the product may damage it and result in serious injury.
• Do not immerse the product in water or other liquids or throw it into a fire.
• Do not leave the product unattended while it is in operation.
• Avoid turning the product on and off frequently and repeatedly.
• While the product is in operation, it may become hot. This is a normal occurrence. Therefore, make sure that there are no heat-sensitive objects / surfaces near the product.
• If you notice an unpleasant odor or smoke while using the product, unplug the product immediately and stop using it. Contact an authorized customer centre.
• Avoid overloading the product. Avoid dropping the product.
• Do not place any objects on the product. There is a risk of irreversible damage to the product.
• This product does not contain parts repairable by the user . In the event of a malfunction or defect contact the nearest authorized service center. Check it regularly for damage.
• Use only a soft, clean, dry cloth to clean the surface.
• Do not use any chemical cleaners, abrasives, gasoline, thinners or other similar substances. Before cleaning, make sure that the product is disconnected from the power supply.
• Store the product in a dry and well-ventilated place. Do not place any objects on the product when in storage.

DISPOSAL OF USED BATTERIES

Batteries contain materials harmful to the environment. Do not dispose of batteries in a regular community waste. Dispose of used batteries properly at collection points.

www.eternico.net

Co. Reg. No. 27082440
Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic © 2023 Alza.cz a.s. All Rights Reserved.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>