Ardes AR4P16 Sleek Mica Radiator Heater Instruction Manual

: May 15, 2024
: Ardes

Table of Contents

Ardes AR4P16 Sleek Mica Radiator Heater
Product Information
Product Usage Instructions
Control Panel
Remote control
Technical information
Instructions for use
Assembly.
Maintenance
USER INFORMATION
GUARANTEE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Ardes AR4P16 Sleek Mica Radiator Heater

Ardes-AR4P16-Sleek-Mica-Radiator-Heater-product

Product Information

Specifications

Model: AR4P16
Power Thermal: 2.0 kW
Manual Control of Thermal Load with Integrated Thermostat
Minimum Thermal Power: 1.2 kW
Maximum Continuous Thermal Power: 2.0 kW
Auxiliary Power Consumption
Electronic Control of Thermal Load with Ambient and/or External Temperature Feedback

Product Usage Instructions

Assembly

During assembly, the fan heater must always be turned off and not connected to the power supply.
Refer to the following figures for assembly:

Functionality

To deactivate a function, press the ON/OFF or HEAT button and manually select the desired function (low power or high power).
LOCK Button (Remote Control): Press this button to lock any other commands. To unlock the commands, press the LOCK button on the remote control again or hold down buttons (5) and (6) on the control panel for a few seconds.

Maintenance

Dispose of packaging material properly according to recycling guidelines in your area.
For battery disposal, remove the batteries from the device before disposal. Do not throw batteries in household waste. Dispose of batteries in designated containers or specific collection centers. Proper recycling helps prevent potential negative effects on the environment and health. Follow the instructions in the user manual to remove the batteries.

Warranty
Warranty information is provided separately.

FAQ

Q: Is this product suitable for all spaces?
A: No, this product is only suitable for well-insulated spaces or occasional use.
Q: Can I cover the fan heater?
A: No, to avoid overheating, do not cover the appliance or obstruct the air vents.
Q: How far should flammable materials be kept from the air outlet?
A: Keep flammable materials, such as fabrics, curtains, or any other flammable material, at least 1 meter away from the air outlet to prevent fire hazards.
Q: Can I leave the room while the fan heater is operating?
A: Do not leave the room unattended while the fan heater is operating unless there is constant supervision.

This product is only suitable for well-insulated spaces or occasional use.

Control Panel

Remote control

Warnings

ATTENTION: read this booklet carefully it contains important instructions for safe installation, use, and maintenance. Important instructions to be kept for future reference.

This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be done by children without supervision.
Children of less than 3 years should be kept away unless continuously supervised.
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children aged from 3 years and less than 8 years shall not plug in, regulate, and clean the appliance or perform user maintenance.
CAUTION — Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.
If the power cable gets damaged, it has to be replaced only at a service center approved by the manufacturer to prevent any risks.

DO NOT COVER

WARNING: In order to avoid overheating, do not cover the heater.
Do not place the appliance immediately below a socket outlet.
Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
Do not use this heater if it has been dropped.
Do not use if there are visible signs of damage to the heater.
Use this heater on a horizontal and stable surface.
WARNING : Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
WARNING : To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1 m from the air outlet.
Don’t connect the appliance to the power supply and don’t use it unless it is completely assembled (see mounting instructions).
Keep handy the guarantee, receipt of payment and these instructions for future use and reference.
After removing the packaging, check the appliance for any signs of damage.
In case of visible damage, do not use it and contact a qualified technician.
Do not leave parts of the packaging with in the reach of children.
This appliance is not a children’s toy: it is an electrical device and must be treated with the necessary caution.
Before connecting the appliance, make sure that the power supply voltage matches the indication on the data plate.
If the plug and socket are not compatible, the socket has to be replaced with a suitable type by skilled persons.
Do not use adapters or extension cables that do not meet current safety standards or that exceed the current carrying capacity limits. When you don’t use the appliance disconnect it from the power supply and assure that the interruptor is off.
Do not tug on the power cable or on the appliance itself to remove the plug from the socket.
The use of any electrical appliance requires that several basic rules are observed, namely:
- Never touch the appliance with wet or humid hands.
- Do not leave the appliance exposed to weathering (rain, sunlight).
- Do not subject it to rough handling.
In case of a breakdown or malfunctioning of the appliance, disconnect it at once.
Do not attempt to repair it, but take it to a service centre approved by the manufacturer.
If you decide you do not want to use this appliance any longer, disable it by cutting the power cable – of course, after disconnecting it from the socket.
The power cable should be extended to its full lenght to avoid over heating.
For safety reasons, the appliance should never be opened.
The appliance has been designed and manufactured to operate in the home.
Any other use is considered inappropriate and dangerous.
Do not insert objects through the safety grill or the air inlets.
During use, rest the appliance on a flat surface.
Do not use this heating appliance with programmers, timers, separate remote control systems (different to the ones provided with the appliance) or any other device that automatically turns on the appliance, as there is a risk of fire in the event the appliance is covered or positioned incorrectly. Do not use the heater in presence of flammable substances (petrol,paints, etc.).
Do not place the cord near sources of heat.
WARNING : DO NOT COVER THIS PRODUCT NEAR CURTAINS OR OTHER COMBUSTIBLE MATERIAL.
WARNING : DO NOT COVER THE APPLIANCE OR OBSTRUCT THE AIR INLETS TO AVOID OVERHEATING.

WARNINGS ABOUT BATTERIES:

KEEP BATTERIES OUT OF THE REACH OF CHILDREN. Swallowing can lead to chemical burns, perforation of soft tissue, and death. Severe burns can occur within 2 hours of ingestion. Seek medical attention immediately.
Do not allow children to replace batteries.
Always insert batteries correctly with regard to polarity (+ and -) marked on the battery and the equipment.
Do not short-circuit batteries.
Do not charge batteries.
Do not force discharge batteries.
Do not mix new and used batteries or batteries of different types or brands.
Exhausted batteries should be immediately removed from equipment and properly disposed of.
Do not heat batteries
Do not weld or solder directly to batteries.
Do not dismantle batteries.
Do not deform batteries
Do not dispose of batteries in fire.
A lithium battery with a damaged container should not be exposed to water.
Do not encapsulate and/or modify batteries.
Store unused batteries in their original packaging away from metal objects. If already unpacked, do not mix or jumble batteries.
Remove batteries from equipment if it is not to be used for an extended period unless it is for emergency purposes.
Clean the battery contacts and also those of the equipment before battery installation.
In case of leak from batteries, avoid any contact with it; in case of contact, wash the affected part with water and seek medical attention.

Technical information

Air outlet grid
Display
Base
Air inlet grid
Button / Indicator light: “TEMPERATURE
Button / Indicator light: “TIMER”
Button / Indicator light: “SWING”
Button / Indicator light: ON/ OFF

Technical data indicated on the appliance.

Instructions for use

Assembly.

Caution! The heater should always be switched off and does not connected to the mains supply if you mount the heater.

Assemble the two halves of the base together by aligning the pins with the holes (pic. 1) and sliding them one over the other (pic. 2). The base is assembled (pic. 3).
To fix the base of the heater, turn the main body upside down laying it on a soft surface to avoid any damage on the upper part.
Place the base on the unit e fix it by using the screws provided.

Pay attention that all the parts are correct and firmly connected with each other.
Caution! Connect to the mains supply only after the heater has been fully assembled.

The device must not be used without a fixed base
The device may be operated only in a straight and upright position
This device may not be used in a horizontal position

Batteries

Remote control is supplied without batteries; before using the remote control open the battery holder placed on the back of the remote control (refer to the diagram shown on the back of the remote control) and insert 1 battery CR2025 3V respecting the indicated polarity.
To remove the battery, refer to the diagram shown on the back of the remote control.

Description of controls:
To turn the appliance on, insert the plug in the power outlet.
For your convenience, the unit can be operated by using the control panel in the main body or using the remote control included.

“On/Off” button (control panel)
When the device is switched off, press this button to turn it on. The device switches on in minimum heating mode.
The indicator light (8) will switch on in blue color and the display (2) will show the room temperature When the device is switched on, press this button to change the operating mode:

minimum heating; indicator (8) will be blue;
maximum heating; indicator (8) will be red;
off; indicator (8) will be switched off. Wait 15 seconds until the fan will stop.

“SWING” button (control panel and remote control)
Press this button to activate or deactivate the automatic swing function of the device. When the swing function is active, the corresponding indicator (7) lights up.

“TIMER” button (control panel and remote control)

Press the TIMER button when the device is working to program automatic switch-off at an interval of between 1 to 24 hours from when it is programmed. Every time the button is pressed, the interval increases by one hour.
A few seconds after selecting the timer, the display (2) will show the room temperature again.
When the timer function is activated, the indicator (6) lights up on the control panel. To disable the timer function, press the timer button repeatedly until the display shows “0 0”.

“Temp” button (control panel and remote control)

Press one of these buttons to set the desired room temperature (automatic function); the set temperature will flash on the display (2).
The set temperature will change from a minimum of 15°C to a maximum of 40°C.
Once the desired temperature has been selected, the display (2) will show the room temperature after a few seconds. In automatic mode, the device will automatically regulate the heating power based on the difference between the room temperature and the set temperature. In this operating mode, the device will also switch between the various power levels (ventilation, low power, high power) repeatedly.

The selected power level is always shown on indicator (8):

minimum heating (blue);
maximum heating (red);
ventilation (switched off).

Once the set temperature has been reached, ventilation will remain active to monitor the room temperature more effectively. To disable this function, press the “ON/OFF” or “HEAT” button and manually select the desired function (low power or high power).

Button (remote control)

When the device is switched off, press this button to turn it on. The device switches on in minimum heating mode.
The indicator light (8) will switch on in blue color and the display (2) shows the room temperature.
When the device is switched on, press this button to turn it off. Wait 15 seconds until the fan will stop.

“HEAT” button (remote control)

When the device is switched on, press this button to change the operating mode:
minimum heating; indicator (8) will be blue;
maximum heating; indicator (8) will be red;

“LOCK” button (remote control)
Press this button to lock all other buttons.
To unlock, press this button or keep pressing for few seconds both (5) and (6) buttons on the control panel.

Note:

to switch off the display and the indicator lights, keep pressed the “Swing” button on the control panel for few seconds; press any other button to switch on again the display and the indicator lights.
The appliance will switch off automatically when the ambient temperature exceeds 50°C.

Maintenance

Disconnect the plug from the socket and let the appliance cool down well before cleaning it.
To clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from entering into the appliance and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
Dust inside the appliance
Use a vacuum cleaner on the back grid.

PACKAGING
To respect the environment, packaging material must be disposed of properly by separate collections. Check local regulations.

BATTERIES – Remove the batteries from the appliance before its disposal. Do not dispose of the batteries with domestic waste. The batteries must be disposed of in the appropriate containers or in the specific collecting centre. Suitable segregated collection helps prevent damage to the environment and to human health. To remove batteries, refer to Instructions for use.

USER INFORMATION

“Implementation of Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)”, about reduced use of hazardous substances in electrical and electronic equipment, as well as to waste disposal”.
The symbol of the crossed-out wheelie bin on the equipment or on its packaging indicates that the product must be disposed of separately from other waste at the end of its service life.
The user must therefore take the dismissed equipment to suitable separate collection centres for electrical and electronic waste.
For more details, please contact the appropriate local authority.
Suitable segregated collection of the equipment for subsequent recycling, treatment or environmentally friendly disposal helps prevent damage to the environment and to human health, and encourages the re-use and/or recycling of the materials that make up the equipment.
Abusive disposal of the product by the user shall result in the application of administrative fines by the laws in force.

GUARANTEE

Terms and Conditions

The guarantee is valid for 24 months.
This guarantee applies only if it has been duly filled in and is submitted with the receipt showing the date of purchase.
The guarantee covers the replacement or repair of parts making up the appliance that were faulty at source due to manufacturing faults.
After the guarantee has expired, the appliance will be repaired against payment.
The manufacturer declines any responsibility for damage to persons, animals or property due to misuse of the appliance and failure to observe the directions contained in the instructions.

Limits
All rights under this guarantee and any responsibility on our part will be voided if the appliance has been:

mishandled by unauthorized persons
improperly used, stored or transported.

The guarantee does not cover damage to the outward appearance or any other that does not prevent regular operation.
If any faults should be found despite the care taken in selecting the materials and in creating the product, or if any information or advice are required, please contact your local dealer

Information requirements for electric local space heaters

Model identifier(s):	AR4P16
Item	Symbol
Heat output

integrated thermostat

| N.A.
Minimum heat output (indicative)| Pmin| 1,2| kW| | Manual heat charge control with room and/or outdoor temperature feedback| N.A.
Maximum continuous heat output| Pmax,c| 2,0| kW| | Electronic heat charge control with room and/or outdoor temperature feedback| N.A.
Auxiliary electricity consumption| | Fan assisted heat output| N.A.
At nominal heat output| max| N.A.| kW| | Type of heat output/room temperature control (select one)
At minimum heat output| elmin| N.A.| kW| | Single stage heat output and no room temperature control| No
In standby mode| elSB| 0,0004| kW| | Two or more manual stages, no room

temperature control

| No
| | | | | With mechanic thermostat room temperature control| No
| | | | | With electronic room temperature control| Yes
| | | | | Electronic room temperature control plus day timer| No
| | | | | Electronic room temperature control plus week timer| No
| | | | | Other control options (multiple selections possible)
| | | | | Room temperature control, with presence

detection

| No
| | | | | Room temperature control, with open

window detection

Poly Pool S.p.A. Via Sottocorna, 21/B
24020 Parre (Bergamo) – Italy
Tel. +39 035 4104000 r.a. – Fax +39 035 702716
http://www.ardes.it
e-mail: polypool@polypool.it