Jakit T2000 Intelligent Film Cutting Machine User Manual
- May 15, 2024
- Jakit
Table of Contents
Jakit T2000 Intelligent Film Cutting Machine
Product List
Appearance and function
- Operation display screen Touch to control device operation
- Power button Press to start the device
- Driver (small car) Control the lateral movement of the cutting head
- Automatic paper feed sensor
- Side plate Auxiliary limit
- Knife head (cutting protective film) See 10-15 for details
- Pinch roller Vertical movement of fixed protective film.
- Power button Start the device,
- Data port access.
Blade Level/ Cutting Pressure setting
Instructions
Install the blade holder
Tips : The blade will gradually become dull when use a lot, which affects the cutting quality, it is recommended to replace it in time
Power connection, Starting up
Please use AC 100-240V : connect the adapter and power cord, and connect the other end of the power cord to AC 100-240V; the adapter’s DC output line plug is connected to the input port of the film cutter; install the blade holder to make sure it is fixed at the right position of the carriage head. After the connection and installation are completed, press the power button to start the device.
Screen film cutter machine operation
When using it for the first time, click “Set Network” to complete the wifi
connection, click “Mine” in the lower function bar, and find “Select Language”
to complete the language setting.
After the system starts normally, enter the homepage
Enter keywords in the search box, search for the product model you need to cut, and select the corresponding model.
Cutting film
- PIease prepare a protective film to be cut as shown in the picture to ensure that the protective film is flat and the film layer is compl ete without bending, folding or missing layers.
- With automatic paper feeding: Push the protective film smoothly to the dotted area to let go.
- After checking that the protective film is properly placed,select the desired protective film model in thr disply screen of the film cutting machine or through Bluetooth in the APP interface, and click “start cutting” to cut.
- After the cutting finished, the protective film will be automatically pushed out, take out the protective film, and complete the cutting
The content of the manual will be revised irregularly according to product upgrades,which may be different from the actual product. Please refer to the actual product. Please forgive us for any inconvenience caused!
Notice
Scan the QR code, please download the film cutting machine App according to the prompts
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device.pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee tha interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/Ty technician for help.
Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment, This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>