one LIGHT 68004 COB LED Recessed Light Installation Guide
- June 20, 2024
- one LIGHT
Table of Contents
one LIGHT 68004 COB LED Recessed Light
FEATURE
350mA | COB LED | 3W | IP54 | Aluminium | Recessed
Requires 350mA driver / Supplied with box for concrete installation.
FOR CONCRETE INSTALLATION
Hole required with diameter 52mm.
- Insert cable through wall box
- Insert wall box into the wall and secure with cement.
Connect and terminate wires to the terminal block connector.
Secure the fitting into the wall box.
FOR GYPSUM INSTALLATION
Mark gypsum board and cut hole with diameter 49mm.
Connect and terminate wires to the terminal block connector.
Insert fitting into the gypsum board until the clips snap into place.
Warnings:
- Make sure that the product is installed properly before connecting to electricity.
- Do not cover the fitting.
- Maintenance and installation should only be carried out by a professional electrician.
CUSTOMERS SUPPORT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>