beurer HD 150 XXL Nordic Heat Blanket User Manual

June 15, 2024
Beurer

beurer HD 150 XXL Nordic Heat Blanket

Read these instructions for use carefully. Observe the warnings and safety notes. Keep these instructions for use for future reference. Make the instructions for use accessible to other users. If the device is passed on, provide the instructions for use to the next user as well.

Explanation of symbols

The following symbols are used on the device, in these instructions for use, on the packaging, and on the type plate for the device:

Items included in the package

Check that the device packaging has not been tampered with and make sure that all contents are present. Before use, ensure that there is no visible damage to the device or accessories and that all packaging material has been removed. If you have any doubts, do not use the device and contact your retailer or the specified Customer Services address.

  • 1 Heated over blanket
  • 1 Control
  • 1 Instructions for use

Description

  1. Mains plug
  2. Mains cable
  3. Control
  4. Indicator lamp
  5. Sliding switch for ON/OFF and temperature settings
  6. Plug-in coupling

Important instructions Retain for future use

WARNING

  • Non-observance of the following instructions may result in personal injury or material damage (electric shock, skin burns, fire). The follow-ing safety and hazard information is not only intended to protect your health and the health of others, it should also protect the product. For this reason, pay attention to these safety notes and include these instructions when handing over the product to others.
  • This heated over blanket must not be used by persons who are not sensitive to heat or by other vulnerable persons who may not be able to react to overheating (e.g. diabetics, people with skin alterations due to illness or scarred tissue in the application area, after taking pain relief medication or alcohol).
  • This heated over blanket must not be used by very young children (0-3 years old) as they are unable to respond to overheating.
  • The heated overblanket can be used by children older than 3 and younger than 8 years of age provided they are supervised. For this, the control must always be set to the minimum temperature.
  • This heated overblanket may be used by children over the age of 8 and by people with reduced physical, sensory or mental skills or a lack of experience or knowledge, provided that they are supervised or have been instructed on how to use the heated overblanket safely, and are fully aware of the consequent risks of use.
  • Children must not play with the heated overblanket.
  • Cleaning and user maintenance must not be performed by children unless supervised.
  • This heated overblanket is not designed for use in hospitals.
  • This heated overblanket is only intended for domestic/private use, not for commercial use.
  • Do not insert pins.
  • Do not use folded or rucked.
  • Do not use if wet.
  • This heated overblanket may only be used in conjunction with the control specified on the label.
  • The heated over blanket must only be connected to the mains voltage that is specified on the label.
  • The electrical and magnetic fields emitted by this heated over blanket may interfere with the function of a pacemaker. However, they are still well within the limits: electrical field strength: max. 5000 V/m, magnetic field strength: max. 80 A/m, magnetic flux density: max. 0.1 millitesla. Please consult your doctor and the manufacturer of your pacemaker before using this heated overblanket.
  • Do not pull, twist or make sharp bends in the cables.
  • If the cable and control are not positioned properly, there may be a risk of becoming entangled in, being strangled by, tripping over, or stepping on the cable and control of this heated over blanket. The user must ensure that excess lengths of cable, and cables in general, are safely routed.
  • Please check this heated-over blanket frequently for signs of wear and tear or damage. If any such signs are evident, if the heated overblan-ket has been used incorrectly or if it no longer heats up, it must be checked by the manufacturer before being switched on again.
  • Under no circumstances should you open or repair the heated over-blanket (including the accessories) yourself because faultless functionality can no longer be guaranteed thereafter. Failure to observe this will invalidate the guarantee.
  • If the mains connection cable of this heated-over blanket is damaged, it must be disposed of. If it cannot be removed, the heated-over blanket must be disposed of.
  • Do not expose the control and cables to direct sunlight.
  • When this heated-over blanket is switched on:
    • Do not place any sharp objects on it.
    • Do not place any heat sources, such as hot water bottles, heat pads or similar, on it.
  • The electronic components in the control warm up when the heated-over blanket is in use. For this reason, the control must never be covered or placed on the heated-over blanket when it is in use.
  • It is essential to observe the information relating to the following chapters: Operation, Cleaning and maintenance, Storage.
  • If you should have any questions about using our devices, please contact Customer Services.

Intended use

CAUTION
This heated-over blanket is only designed to warm up the human body.

Operation

Safety

CAUTION

  • The heated-over blanket is fitted with the SAFETY SYSTEM. This electronic sensor technology protects against overheating across the entire surface of the heated blanket with an automatic switch-off if there is a fault.
  • Please note that, for safety reasons, the heated-over blanket can no longer be operated after a fault has occurred and must be sent to the specified service address.
  • Do not connect the defective heated-over blanket with another control of the same type. This would trigger a permanent switch-off via the control safety system.

Initial use

  • First, connect the control to the heated-over blanket by inserting the plug-in coupling.
  • Then plug the mains plug into the socket.

Switching on
To switch the heated-over blanket on, set the sliding switch for ON/OFF and temperature settings to setting 1, 2, 3, 4, 5 or 6. When it is switched on, the indicator lamp (4) lights up.

Setting the temperature

  • Level 0: OFF
  • Level 1: minimum heat
  • Setting 2 – 5: individual heat setting
  • Level 6: maximum heat

NOTE
The fastest way to warm up the heated blanket is to initially set the highest temperature setting.

WARNING
If the heated overblanket is being used over several hours, we recommend that you set the lowest temperature setting on the control to avoid the body overheating and thereby any potential burns to the skin or heat stroke.

Automatic switch-off
This heated overblanket switches off automatically after 3 hours. Once the heated overblanket has switched off, it is no longer heated and the indicator lamp flashes. To switch on the heated overblanket again, first set the sliding switch for ON/OFF and temperature settings to the OFF ( 0 ) position for 5 seconds. After about 5 seconds it is possible to switch it on again.

Switching off
To switch off the heated overblanket, slide the sliding switch for ON/OFF and temperature settings to the OFF ( 0 ) position.

NOTE
If the heated overblanket is not been used for several days, slide the sliding switch for ON/OFF and temperature settings to the OFF ( 0 ) position and remove the mains plug from the socket. Then disconnect the control from the heated overblanket by unplugging the plug-in coupling.

Cleaning and maintenance

WARNING
Before cleaning, always remove the main plug from the socket first. Then disconnect the control from the heated overblanket by unplugging the plug-in coupling. Otherwise there is a risk of electric shock.

CAUTION
The control must never come into contact with water or other liquids, as this may cause damage.

  • To clean the control, use a dry, lint-free cloth. Do not use any chemical or abrasive cleaning agents.
  • Small marks on the heated over blanket can be removed with a damp cloth or sponge and, if necessary, with a little liquid detergent for delicate laundry.

CAUTION
Please note that the heated-over blanket may not be chemically cleaned, wrung out, tumble-dried, put through a mangle or ironed.

  • This heated overblanket is machine-washable.
  • Set the washing machine to a particularly gentle wash cycle at 30 °C (wool cycle). Use a delicate laundry detergent and measure it out according to the manufacturer’s instructions.

CAUTION
Please note that frequent washing of the heated-over blanket hurts the product. The heated overblanket should therefore be washed in a washing machine a maximum of 5 times during its life.

  • Immediately after washing, reshape the heated-over blanket to its original dimensions while it is still wet and spread it out flat over a clothes horse to dry.

CAUTION

  • Do not use pegs or similar items to attach the heated overblanket to the clotheshorse. Failure to do so may damage the heated-over blanket.
  • Do not reconnect the control to the heated overblanket until the plug-in connector and electric overblanket are completely dry. Failure to do so may damage the heated-over blanket.

WARNING
Never switch the heated-over blanket on to dry it! Otherwise, there is a risk of electric shock.

Storage

If you do not plan to use the heated blanket for a long period, we recommend that you store it in the original packaging. For this purpose, disconnect the control from the heated-over blanket by unplugging the plug-in coupling.

CAUTION

  • Allow the heated-over blanket to cool down before folding. Otherwise, the heated overblanket may be damaged.
  • Do not crease the heated-over blanket by placing items on top of it during storage.

Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please contact the local authorities responsible for waste disposal.

What if there are problems?

Problem Cause Solution
The indicator lamp is not illuminated while The safety system has Send the

heated
– the control is properly connected to the heated over-| switched the heated| over blanket and the
blanket.| overblanket off perma-| control for servicing.
– the mains plug is connected to a working socket.| nently.|
– the sliding switch for ON/OFF and temperature settings|  |
is set to 1, 2, 3, 4, 5 or 6.|  |

Technical data

See the type plate label on the heated overblanket.

Guarantee/service

Further information on the guarantee and guarantee conditions can be found in the guarantee leaflet supplied.

UK-Importer: Beurer UK Ltd.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals