CREALITY Ender 3 Sprider 2.0 High Temperature Hotend Kit Instruction Manual
- June 15, 2024
- Creality
Table of Contents
CREALITY Ender 3 Sprider 2.0 High Temperature Hotend Kit
PARTS
OVERVIEW
INSTALLATION INSTRUCTION
- Remove the original hotel, and detect the thermistor and heating tube. Re-attach the thermistor and heating tube on the Spider high-temperature hot end, and lock the high-temperature nozzle with M3×20 screws. Reinstall the fan cover and the installation is complete.
- When installing the glass ball probe thermistor, it is necessary to apply thermal paste to the surface of the glass ball probe for better heat conduction. Assemble as shown.
Note: If the nozzle is clogged during printing, it can be improved by
reducing the retraction setting. The recommended retraction distance does not
exceed 5mm.
- Official Website: www.cxsw3d.com
- www.creality.com
- Tel: 400 6133 882
- 0755-8523 4565
Read User Manual Online (PDF format)
Loading......