vtech VM5263 5 Inch High Definition Pan and Tilt Video Baby Monitor User Guide
- June 15, 2024
- vtech
Table of Contents
- VM5263 5 Inch High Definition Pan and Tilt Video Baby Monitor
- Important safety instructions
- What’s in the box
- Connect the baby monitor
- Power on or off the baby monitor
- Positioning the baby monitor
- Status check
- Basic operation – Parent unit
- Overview – Baby unit
- Overview – Parent unit
- Parent unit icons
- Night Light
- Night vision
- CABLE MANAGEMENT
- Mount the baby unit on dry wall (optional)
- Limited warranty
- TECHNICAL SPECIFICATIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
VM5263 5 Inch High Definition
Pan and Tilt Video Baby Monitor
User Guide
VM5263 5 Inch High Definition Pan and Tilt Video Baby Monitor
Quick start guide
VM5263 VM5263-2
5” High Definition
Pan & Tilt Video Baby Monitor
Important safety instructions
The applied nameplate is located at the bottom of the baby unit’s base.
When using your equipment, basic safety precautions should always be followed
to reduce the risk of fire, electric shock and injury, including the following:
-
Follow all warnings and instructions marked on the product.
-
Adult setup is required.
-
CAUTION: Do not install the baby unit at a height above 6.5 feet (2 meters).
-
This product is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such.
-
This product is not intended for use as a medical monitor.
-
Do not use this product near water, for example, near to a bath, sink, swimming pool or shower.
-
CAUTION: Use only the battery provided (if applicable). There may be a risk of explosion if a wrong type of battery is used for the parent unit. The battery cannot be subjected to high or low extreme temperature and low air pressure at high altitude during use, storage or transportation. Disposal of battery in fire or a hot oven, mechanically crushing or cutting the battery can result in an explosion. Leaving the battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid of gas. Battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to the information in The RBRC seal.
-
Use only the power adapters included with this product. Incorrect power adapter polarity or voltage can seriously damage the product.
Power adapter information:
Parent unit output: 5V DC 2A
VTech Telecommunications Ltd.
Model: VT07EUS05200
Baby unit output: 5V DC 1A.
VTech Telecommunications Ltd.
Model: VT05EUS05100
Rechargeable battery information:
3.7V 5000mAh, 18.5Wh Lithium-ion battery Zhuhai Great Power Energy Co., Ltd.
Model: GSP806090-5Ah-3.7V-1S1P -
The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, under-the-table or cabinet outlet.
-
For pluggable equipment, the socket-outlet (power adapter) should be installed near the equipment and should be easily accessible.
-
Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
-
Do not modify the power adapters or replace with other adapters, as this causes a hazardous situation.
-
Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped.
-
This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or electricity supply provider.
-
Do not overload wall outlets or use an extension cord.
-
Do not place this product on an unstable table, shelf, stand or other unstable surfaces.
-
This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation. To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat source.
-
Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product.
-
To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Disassembling or removing parts of the product other than via the battery door (if applicable) may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used.
-
You should test the sound reception every time you turn on the units or move one of the components.
-
Periodically examine all components for damage.
-
There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the baby monitor periodically by powering off and then powering on the units, and power off the baby monitor if you are not intending to use it for some time.
-
Children should be supervised to ensure that they do not play with the product.
-
The small parts of this monitor can be swallowed by babies or small children. Keep these parts out of reach of children.
-
The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
SAVE THESE INSTRUCTIONS
Cautions
- Use and store the product at a temperature between 32 o F (0 °C) and 104°F (40° C).
- Mishandling batteries can cause burn, fire or explosion hazards.
- Batteries should not be exposed to excessive heat such as bright sunshine or fire.
- Do not expose the product to extreme cold, heat or direct sunlight. Do not put the product close to a heating source.
- Warning—Strangulation Hazard—Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft (0.9m) away). Do not remove warning label on the adapter cord.
- Never place the camera unit(s) inside the baby’s crib or playpen. Never cover the camera unit(s) or parent unit with anything such as a towel or a blanket.
- Other electronic products may cause interference with your camera unit. Try installing your camera unit as far away from these electronic devices as possible: wireless routers, radios, cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and cordless telephones.
Precautions for users of implanted cardiac pacemakers
Cardiac pacemakers (applies only to digital cordless devices):
Wireless Technology Research, LLC (WTR), an independent research entity, led a
multidisciplinary evaluation of the interference between portable wireless
devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug
Administration, WTR recommends to physicians that:
Pacemaker patients
- Should keep wireless devices at least six inches from the pacemaker.
- Should NOT place wireless devices directly over the pacemaker, such as in a breast pocket, when it is turned ON.
WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices.
Electromagnetic fields (EMF)
This VTech product complies with all standards regarding electromagnetic fields
(EMF). If handled properly and according to the instructions in this user’s
manual, the product is safe to be used based on scientific evidence available
today.
What’s in the box
Connect the baby monitor
The parent unit turns on automatically after connecting the power adapter to the power socket and the battery LED light illuminates for a few seconds, then turns off.
NOTES
- The rechargeable battery in the parent unit is built-in.
- Use only the power adapters supplied with this product.
- Make sure the baby monitor is not connected to a switch-controlled electric outlet.
- Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not designed to hold the weight of baby monitor, so do not connect them to any ceiling, under-the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets.
- Make sure the parent unit, the baby units and the power adapter cords are out of reach of children.
Charge the parent unit battery
When you have connected and turned the parent unit on, the battery charges
automatically.
Notes
- Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When the parent unit battery is fully charged, the battery icon segments are solid .
- It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time, turn the parent unit off while charging.
- The standby time varies depending on the sensitivity level you set, your actual use and the age of the battery.
The battery icon indicates the battery status (see the following table).
Battery indicators | Battery status | Action |
---|---|---|
The screen displays and . The LED light flashes. | The battery has very little |
power and can only be used
for a short time.| Charge without interruption (about 30 minutes).
The battery icon segments are solid .| The battery is fully charged.| To keep
the battery charged, connect the unit to AC power when in use.
Power on or off the baby monitor
-
Connect the power adapter to the baby unit and a power supply to power on the unit. The night light turns on in green for 2 seconds, then turns off.
Disconnect the baby unit from the power supply to power off. -
Press and hold POWER to power on or off your parent unit.
Positioning the baby monitor
Caution
• The default volume of your parent unit is level 4, and the maximum volume is
level 7. If you experience feedback noise from your baby monitor while
positioning:
-Make sure your baby unit and parent unit are more than 3 feet (1 meter) apart, OR
-Lower the volume of your parent unit.
Note
- To avoid interference from other electronic devices, place your baby monitor at least 3 feet (1 meter) away from devices such as wireless routers, microwaves, mobile phones and computers.
Status check
Once you power on both your baby unit and parent unit, your parent unit displays image from the baby unit, and the LINK LED light turns on.
Basic operation – Parent unit
Adjust speaker volume
Press -VOL / VOL+ to adjust your parent unit speaker volume. It determines
the volume of sound transmitted from your baby unit.
Talk to your baby unit
- Press and hold the TALK key.
- When the TALK LED turns on, speak to your parent unit. Your voice is transmitted to the baby unit.
- When finished talking, release the TALK key.
Zoom
Press or to zoom in or out.
Turn off the screen
Press LCD ON/OFF to switch off the screen. You can still hear sound from
the baby unit.
Tip
• Press any keys on the parent unit to turn on the screen again.
Use the menu
Press to enter the menu, choose a menu item, or save a setting. You can use
the parent unit for advanced settings or operations, such as to play or stop
the baby unit lullaby, or to adjust the baby unit sound sensitivity.
While in the menu:
- Press to scroll among the menu options.
- Press to select an item, or to save a setting.
- Press to scroll among the sub-menus, or to adjust a setting.
- Press to return to the previous menu options without changing the current setting.
- Press TALK to return to live video.
- Press to go to Help & Info page.
Overview – Baby unit
Overview – Parent unit
-
LED light
• On when the parent unit is connected to AC power, or the battery is charging.
• Flashes when the parent unit battery is low and needs charging.
• Off when the parent unit is disconnected from AC power. -
LINK LED light
• On when the parent unit is linked to the baby unit.
• Flashes when the link to the baby unit is lost. -
LED light
• On when the parent unit speaker volume is set to off.
• On when the parent unit is talking to the baby unit. -
TALK LED light
• On when the parent unit is talking to the baby unit. -
LCD display
-
Microphone
-
LCD ON/OFF
-
POWER
-
Lullaby
• Press to enter the lullaby menu. -
TALK /
• Press and hold to talk to the baby unit.
• While in a submenu, press to exit. -
Arrow keys
• Press to move the selection box leftward, upward, rightward or downward.
• While viewing image from the baby unit, press and hold to pan the baby unit leftward, upward, rightward or downward.
• While viewing zoomed image, press and hold to move the zoomed image leftward, upward, rightward or downward. -
MENU/SELECT
• Press to enter the menu.
• While in a menu, press to choose an item, or save a setting. -
Zoom in
-
Zoom out
-
– VOL/ VOL +
-
Antenna
-
RESET
• Force reboot the parent unit. -
Speaker
-
Power Jack
-
Stand
Parent unit icons
Main Menu Options
Monitoring mode (* For VM5263-2 only)
- View baby unit 1 or 2 in Single mode.
- View both baby units in Patrol mode.
- View both baby units in Split screen.
Night light
- Turn on or turn off night light.
- Select a night light color.
- Adjust night light brightness.
- Set a night light timer.
Melodies and soothing sounds
- Select to play all melodies, or play one of the five melodies and four soothing sounds.
- You can also set the timer to stop playing after 15, 30 or 60 minutes, or playing non-stop.
Alerts – Sound, motion and temperature
- Select the sound and motion sensitivity level.
- Turn on/off sound and motion detection alerts.
- Select maximum and minimum temperature for alert range.
- Turn on/off temperature alert.
- Set the temperature format.
Parent unit settings
- Adjust parent unit screen brightness.
- Turn on/off Low Battery Alert Tone.
- Turn on/off No Link Alert Tone.
- Turn on/off dim mode.
Baby unit settings
• Adjust baby unit’s speaker volume.
General settings
• Reset Settings.
Status icons
Baby unit 1 and 2 are being viewed in Patrol mode (For VM5263-2 only).
Baby unit 1 and 2 are being viewed in Split mode (For VM5263-2 only).
Night vision is turned on.
Motion alert is turned on.
Sound detection alert is turned on.
Melodies and soothing sounds are turned on.
Night light is turned on.
Auto night light brightness is activated.
6-level sound indicator
• indicates low sound level detected by the baby unit.
• indicates moderate sound level detected by the baby unit.
• indicates high sound level detected by the baby unit.
Temperature alert is turned on.
Temperature
Battery level indicator
Alert icons
| • Displays when parent unit’s battery is low and needs charging.
---|---
| • Displays when connection between parent unit and baby unit is lost.
| • Displays when sound is detected at a baby unit when in Split view. For
VM5263-2 only)
| • Baby unit detects temperature reaches or exceeds the set maximum.
| • Baby unit detects temperature is at or is lower than the set minimum.
Night Light
You can control the night light remotely on the parent unit or directly on the
baby unit.
On the parent unit:
1. Press MENU.
2. Press to scroll to Night Light menu, then press MENU or to enter.
3. Press to choose below options:
| Turn on/off night light
---|---
| Change night light color
| Adjust night light brightness
| Set night light timer
On the baby unit:
Night Light Control Key
Single Tap: Turn on/off
For VM5263-2 only
Monitoring Modes
When more than one baby unit is paired to the parent unit, you can choose to
view different baby units in three monitoring modes. Learn more about each
below:
Single Mode| | The screen displays images only from the selected baby unit in
full screen.
---|---|---
Split Mode| | The screen displays images from all paired baby units at the
same time in split view.
Patrol Mode| | The screen displays a single cam view that transitions to a
different baby unit every 10 seconds.
Change the monitoring mode:
- Press MENU when the parent unit is idle.
- Press MENU or ∨ to enter Monitoring Mode menu.
- Press to choose between Single , Split , and Patrol monitoring mode options. Press SELECT to confirm.
Night vision
The baby unit has infrared LEDs that allow you to see your baby clearly at
night or in a dark room. When the baby unit being viewed detects low light
levels, the infrared LEDs are switched on automatically. The images from the
baby unit are in black and white, and appears on the screen.
Notes
- It is normal to see a short white glare on your parent unit screen when the baby unit adapts to the dark environment.
- When the infrared LEDs are on, it is normal for the images to be in black and white.
Tip
- Depending on the surroundings and other interfering factors, for example, lighting, objects, colors and backgrounds, the image quality may vary. Adjust the baby unit angle or place the baby unit at a higher location to prevent glare and a blurred display.
Dim mode
Dim mode helps you save parent unit power. The parent unit display will dim to
conserve energy after 10 minutes of inactivity, in which there is neither key
pressed nor alert received from the baby unit.
To turn Dim Mode on or off, press MENU, go to Parent unit setting s.
Select Dim Mode, then press to turn on or off.
Need help?
For operations and guides to help you using your video monitor, and for latest
information and supports, go and check the online help topics and online FAQs.
Use your smartphone or mobile device to access our online help.
- Go to https://help.vtechphones.com/vm5263 or https://help.vtechphones.com/vm5263-2; OR
- Scan the QR code on the right. Launch the camera app or QR code scanner app on your smartphone or tablet. Hold the device’s camera up to the QR code and frame it. Tap the notification to trigger the redirection of the online help.
-If the QR code is not clearly displayed, adjust your camera’s focus by moving your device closer or further away until it is clear.
You can also call our Customer Support at 1 800-595-9511 [in US] or 1 800-267-7377 [in Canada] for help.
CABLE MANAGEMENT
Mount the baby unit on dry wall (optional)
Notes
- Check for reception strength and camera angle before drilling the holes.
- The types of screws and anchors you need depend on the composition of the wall. You may need to purchase the screws and anchors separately to mount your camera units.
-
Place the wall mount bracket on a wall and then use a pencil to mark two holes in parallel. Remove the wall mount bracket and drill two holes in the wall (7/32 inch drill bit).
-
If you drill the holes into a stud, go to step 3.
• If you drill the holes into an object other than a stud, insert the wall anchors into the holes. Tap gently on the ends with a hammer until the wall anchors are flush with the wall. -
Align the wall mount bracket and screws with the holes in the wall as shown. Tighten the screw in the middle hole first, so that the wall mount bracket position is fixed. You can tighten the other screw in the top hole. 3. Insert the screws into the holes and tighten the screws until only 1/4 inch of the screws are exposed.
-
Place the camera unit on the wall mount bracket, and then slide it forward until it locks into place. Connect the power adapter to the camera unit and a power supply not controlled by a wall switch. 4. Place the camera unit on the wall mount bracket, and then slide it forward until it locks into place. Align the holes on the wall mount bracket with the screws on the wall, and slide the wall mount bracket down until it locks into place.
-
You can maximize your camera unit’s viewing angles by tilting the wall mount bracket.
Hold the camera unit, and then rotate the knob in anticlockwise direction. This will loosen the joint of the wall mount bracket.
Tilt your camera unit up or down to adjust to your preferred angle. Then, rotate the knob in clockwise direction to tighten the joint and secure the angle.
The RBRC seal
The RBRC seal on the lithium-ion battery indicates that VTech Communications,
Inc. is voluntarily participating in an industry program to collect and
recycle these batteries at the end of their useful lives, when taken out of
service within the United States and Canada.
The program provides a convenient alternative to placing used lithium-ion
batteries into the trash or municipal waste, which may be illegal in your
area.
Vetch’s participation makes it easy for you to drop off the spent battery at
local retailers participating in the program or at authorized VTech product
service centers. Please call ® for information on lithium-ion battery
recycling and disposal bans/restrictions in your area. Vetch’s involvement in
this program is part of its commitment to protecting our environment and
conserving natural resources.
The RBRC Seal and 1 (800) 8 BATTERY® are registered trademarks of
Call2recycle, Inc.
FCC and IC regulations
FCC Part 15
This equipment has been tested and found to comply with the requirements for a
Class B digital device under Part 15 of the Federal Communications Commission
(FCC) rules. These requirements are intended to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this equipment not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
To ensure safety of users, the FCC has established criteria for the amount of
radio frequency energy that can be safely absorbed by a user or bystander
according to the intended usage of the product. This product has been tested
and found to comply with the FCC criteria. The baby unit shall be installed
and used such that parts of all persons’ body are maintained at a distance of
approximately 8 in (20 cm) or more. The transmitter and antenna of the parent
unit shall be held at least 1 in (2.5 cm) from your face.
This Class B digital apparatus complies with Canadian requirement: CAN ICES-3
(B)/NMB-3(B)
Industry Canada
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
The term ‘’IC:‘’ before the certification/registration number only signifies
that the Industry Canada technical specifications were met.
This product meets the applicable Innovation, Science and Economic Development
Canada technical specifications.
RF radiation exposure statement
The baby unit complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. The baby unit should be installed and operated with
a minimum distance of 8 in (20 cm) between the baby unit and all persons’
body. Use of other accessories may not ensure compliance with FCC RF exposure
guidelines. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter. This equipment complies
also with Industry Canada RSS-102 with respect to Canada’s Health Code 6 for
Exposure of Humans to RF Fields.
California Energy Commission battery charging testing mode
This baby monitor meets the California Energy Commission (CEC) regulations for
energy consumption. Your baby monitor is set up to comply with the energy-
conserving standards right out of the box. Follow the instructions to install
and charge the battery. The CEC battery charging testing mode is activated
while charging. Even if the parent unit is paired to baby units, the CEC
battery charging testing mode is activated while it is powered off and
charging.
Limited warranty
What does this limited warranty cover?
The manufacturer of this VTech Product warrants to the holder of a valid proof
of purchase (“Consumer” or “you”) that the Product and all accessories
provided in the sales package (“Product”) are free from defects in material
and workmanship, pursuant to the following terms and conditions, when
installed and used normally and in accordance with the Product operating
instructions. This limited warranty extends only to the Consumer for Products
purchased and used in the United States of America and Canada.
What will VTech do if the Product is not free from defects in materials and
workmanship during the limited warranty period (“Materially Defective
Product”)?
During the limited warranty period, Vetch’s authorized service representative
will repair or replace at Vetch’s option, without charge, a Materially
Defective Product. If we repair the Product, we may use new or refurbished
replacement parts. If we choose to replace the Product, we may replace it with
a new or refurbished Product of the same or similar design. We will retain
defective parts, modules, or equipment. Repair or replacement of the Product,
at VTech’s option, is your exclusive remedy. VTech will return the repaired
or replacement Products to you in working condition. You should expect the
repair or replacement to take approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product extends for ONE (1) YEAR from the
date of purchase. If VTech repairs or replaces a Materially Defective Product
under the terms of this limited warranty, this limited warranty also applies
to the repaired or replacement Product for a period of either (a) 90 days
from the date the repaired or replacement Product is shipped to you or (b) the
time remaining on the original one-year warranty; whichever is longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
- Product that has been subjected to misuse, accident, shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion; or
- Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech; or
- Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or
- Product to the extent that the problem is caused by use with non-VTech accessories; or
- Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or
- Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or
- Product returned without a valid proof of purchase (see item 2 below); or
- Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.
How do you get warranty service?
To obtain warranty service in the USA, please visit our website at
www.vtechphones.com or call 1
800-595-9511. In Canada, go to
www.vtechcanada.com or call 1
800-267-7377.
NOTE: Before calling for service, please review the user’s manual – a
check of the Product’s controls and features may save you a service call.
Except as provided by applicable law, you assume the risk of loss or damage
during transit and transportation and are responsible for delivery or handling
charges incurred in the transport of the Product(s) to the service location.
VTech will return repaired or replaced Product under this limited warranty.
Transportation, delivery or handling charges are prepaid. VTech assumes no
risk for damage or loss of the Product in transit. If the Product failure is
not covered by this limited warranty, or proof of purchase does not meet the
terms of this limited warranty, VTech will notify you and will request that
you authorize the cost of repair prior to any further repair activity. You
must pay for the cost of repair and return shipping costs for the repair of
Products that are not covered by this limited warranty.
What must you return with the Product to get warranty service?
- Return the entire original package and contents including the Product to the VTech service location along with a description of the malfunction or difficulty; and
- Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and
- Provide your name, complete and correct mailing address, and telephone number.
Other limitations
This warranty is the complete and exclusive agreement between you and VTech.
It supersedes all other written or oral communications related to this
Product. VTech provides no other warranties for this Product. The warranty
exclusively describes all of VTech’s responsibilities regarding the Product.
There are no other express warranties. No one is authorized to make
modifications to this limited warranty and you should not rely on any such
modification. State/Provincial
Law Rights: This warranty gives you specific legal rights, and you may also
have other rights, which vary from state to state or province to province.
Limitations: Implied warranties, including those of fitness for a particular
purpose and merchantability (an unwritten warranty that the Product is fit for
ordinary use) are limited to one year from the date of purchase. Some states/
provinces do not allow limitations on how long an implied warranty lasts, so
the above limitation may not apply to you. In no event shall VTech be liable
for any indirect, special, incidental, consequential, or similar damages
(including, but not limited to lost profits or revenue, inability to use the
Product or other associated equipment, the cost of substitute equipment, and
claims by third parties) resulting from the use of this Product. Some
states/provinces do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to
you.
Please retain your original sales receipt as proof of purchase.
TECHNICAL SPECIFICATIONS
Frequency control | Crystal controlled PLL synthesizer |
---|---|
Transmit frequency | Baby unit: 2405 – 2475 MHz |
Parent unit: 2405 – 2475 MHz
Channels| 32
LCD| 5” Color LCD (IPS 1280×720 pixels)
Nominal effective range| Maximum power allowed by FCC and IC. Actual operating
range may vary according to environmental conditions at the time of use.
Power requirements| Parent unit: 3.7V Lithium-ion Polymer battery Baby unit
power adapter: Output: 5V DC @ 1A Parent unit power adapter: Output: 5V DC @
2A
For more support information:
|
---|---
<https://vttqr.tv/?q=1VP266>
|
<https://vttqr.tv/?q=1VP267>
Product Recycling
Recycle this product when you are done with it.
For more information, scan the QR code
or visit vtechphones.com/recycle.
https://vttqr.tv/?q=1VP246
Specifications are subject to change without notice.
© 2023 VTech Communications, Inc. All rights reserved.
09/23. VM5263 v2-X_QSG_V1.
Go to www.vtechphones.com
to register your product for
enhanced warranty support and
the latest VTech product news.
References
- VTech Cordless Phones Official Site | Best Home Office & Business Phones
- VTech Canada Official Site | Best Home Office & Business Phones
- VTech Cordless Phones Official Site | Best Home Office & Business Phones
- VTech Cordless Phones Official Site | Best Home Office & Business Phones
- Product Support | VTech® Cordless Phones
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>