CISCO RV340 AnyConnect Secure Mobility Client User Guide

: June 15, 2024
: Cisco

Table of Contents

Objective
Introduction
Install AnyConnect Secure Mobility Client
View a video related to this article…
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CISCO RV340 AnyConnect Secure Mobility Client

Objective

This article shows you how to download and install the Cisco AnyConnect Secure Mobility Client version 4.10.x on a Mac Computer.

This article is ONLY applicable to the Cisco Small Business RV34x series routers, not Enterprise products.

Introduction

AnyConnect Secure Mobility Client is a modular endpoint software product. It not only provides Virtual Private Network (VPN) access through Secure Sockets Layer (SSL) and Internet Protocol Security (IPsec) Internet Key Exchange version2 (IKEv2) but also offers enhanced security through various built-in modules.

AnyConnect Software Version

AnyConnect – v4.10.x (Download latest)

Install AnyConnect Secure Mobility Client

This toggled section provides details and tips for beginners.

Prerequisites

AnyConnect is a licensed product. You need to purchase client license(s) from a partner like CDW or through your company’s device procurement. There are options for 1 user (L-AC-PLS-3Y-S5) or packets of licenses including one year for 25 users (AC-PLS-P-25- S). Other license options available as well, including perpetual licenses. For more details on licensing, check out the links in the Licensing Information section below.
Download the latest version of firmware available for your router. (Click here for step-by-step instructions on this process.)
Make sure your operating system has one of the following versions: macOS 11.x (including Big Sur when using the latest version of AnyConnect firmware), 10.15, 10.14, and 10.13 (only 64-bit is supported from 10.15 and later). If you are not sure if a macOS version is supported, you can check the release notes. View the release notes from May 2021.

Check these other articles out!

Applicable Devices | Software Version

RV340 | 1.0.03.21 (Download latest)
RV340W | 1.0.03.21 (Download latest)
RV345 | 1.0.03.21 (Download latest)
RV345P | 1.0.03.21 (Download latest)

Licensing Information

AnyConnect client licenses allow the use of the AnyConnect desktop clients as well as any of the AnyConnect mobile clients that are available. You will need a client license to download and use the Cisco AnyConnect Secure Mobility Client. A client license enables the VPN functionality and are sold in packs of 25 from partners like CDW or through your company’s device procurement.

Want to know more about AnyConnect licensing? Here are some resources:

Cisco RV340 Series and Cisco Anyconnect Secure Mobility Client Community Discussion Forum.
AnyConnect Licensing FAQs.

Step 1

Open a web browser and navigate to the Cisco Software Downloads webpage.

Licensing Information

Step 2

In the search bar, start typing ‘Anyconnect’ and the options will appear. Select AnyConnect Secure Mobility Client v4.x.

Step 3

Download the Cisco AnyConnect VPN Client. Most users will select the AnyConnect Pre-Deployment Package (Mac OS) option.
Licensing Information

Step 4

Double-click the installer.
Licensing Information

Step 5

Click Continue.

Step 6

Go over the Supplemental End User License Agreement and then click Continue.

Step 7

Click Agree.

Step 8

Choose the components to be installed by checking or unchecking the corresponding check boxes. All components are installed by default.

Licensing Information

The items you select in this screen will appear as options in AnyConnect. If deploying AnyConnect for end-users, you may want to consider deselecting options.

Step 9

Click Continue.