JBL AUTH300 Authentics 300 Speaker User Guide

JBL AUTH300 Authentics 300 Speaker

Product Information

Specifications

• General specification:
  • Power cord quantity and plug type vary by region
• Audio specification:
  • Battery mode: The speaker automatically powers off after 1 hour of inactivity to save power
• USB specification:
  • USB is for Service only (specific to certain versions)
• Wireless specification:
  • Connectivity options include Wi-Fi and Bluetooth

Product Usage Instructions

Power On/Off

To power on or off the speaker in AC-powered mode, use the power button located on the device.

Battery Mode:

In battery mode, the speaker automatically powers off after 1 hour of inactivity to save power.

App Setup

To set up the speaker using the JBL One app:

1. Connect your AndroidTM or iOS device to the Wi-Fi network.
2. Download and install the JBL One app from your device’s app store.
3. Open the JBL One app and follow the instructions to complete the speaker setup.

Music Streaming

You can stream music through the JBL One app or supported music services. Follow these steps:

1. Ensure the speaker is set up and connected to your device through the JBL One app.
2. Open the JBL One app and navigate to the music streaming section.
3. Select your desired music service or choose to stream music stored on your device.

Voice Control

The speaker supports voice control through a voice assistant. Follow these steps:

1. Complete the voice setup in the JBL One app.
2. Activate the voice assistant by saying “OK Google” or the designated wake word.
3. You can now use voice commands to control the speaker and access various features.

Button Control

The speaker has buttons for treble, bass, and moment control.

Follow these instructions:

• To adjust the treble or bass levels, press the respective buttons on the speaker.
• To access the music playlist and personalized speaker settings, press the moment button.

Bluetooth Pairing

To connect your device via Bluetooth:

1. Ensure Bluetooth is enabled on your device.
2. Put the speaker in Bluetooth pairing mode.
3. On your device, go to Bluetooth settings and search for available devices.
4. Select “JBL Authentics 300” from the list of discovered devices.
5. Once connected, you can stream music from your device to the speaker via Bluetooth.

AUX Playback

To play music through the audio cable:

1. Connect one end of the audio cable to the speaker’s AUX input.
2. Connect the other end of the audio cable to your device’s headphone or audio output jack.
3. Ensure no music is playing through Wi-Fi or Bluetooth connections.
4. Start music playback on your device, and it will be played through the speaker via the audio cable.

Charging

The speaker can be charged using the provided power cord. The charging status is indicated by the LED lights:

• 20%: Charging
• 50%: Partially charged
• 100%: Fully charged

Reboot

If you encounter any issues, you can perform a reboot of the speaker by pressing and holding the power button for more than 10 seconds.

Owner’s Manual Download

You can download the owner’s manual in PDF format from the JBL website (www.jbl.com).

FAQ

Q: What is included in the box?

• A: The contents of the box may vary by region. Please refer to the product packaging for the specific power cord quantity and plug type included.

Q: Can I use the speaker without being connected to a power source?

• A: Yes, the speaker has a battery mode that allows you to use it without being connected to a power source. In battery mode, the speaker will automatically power off after 1 hour of inactivity to save power.

Q: Can I control the speaker using voice commands?

• A: Yes, you can control the speaker using voice commands by setting up the voice assistant feature in the JBL One app. Once set up, you can activate the voice assistant by saying “OK Google” or the designated wake word.

Q: How do I connect my device via Bluetooth?

• A: To connect your device via Bluetooth, ensure Bluetooth is enabled on your device and put the speaker in Bluetooth pairing mode. Then, search for available devices in your device’s Bluetooth settings and select “JBL Authentics 300” from the list of discovered devices.

Q: How do I play music through the audio cable?

• A: To play music through the audio cable, connect one end of the audio cable to the speaker’s AUX input and the other end to your device’s headphone or audio output jack.
• Ensure no music is playing through Wi-Fi or Bluetooth connections, then start music playback on your device.

WHAT’S IN THE BOX

• Power cord quantity and plug type vary by region.

POWER ON/OFF

BATTERY MODE

• In the battery mode, the speaker automatically powers off after 1 hour of inactivity to save power.

APP

MUSIC STREAMING

VOICE CONTROL

BUTTON CONTROL

BLUETOOTH PAIRING

AUX

• After the audio cable is connected, ensure that no music plays through Wi-Fi or Bluetooth to start music playback through the audio cable.

CHARGING

REBOOT

OWNER’S MANUAL DOWNLOAD

TECH SPEC

General specification

• Model: Authentics 300
• Sound system: Stereo 2.0
• Power supply: 100 – 240V AC, ~ 50/60Hz
• Total speaker power output (Max @THD 1%): 100W
• Transducer: 2 x 25mm tweeter + 5.25” woofer
• Networked standby power: < 2.0 W
• Operating temperature: 0 °C – 45 °C
• Lithium battery: 3.6V, 4800mAh

Audio specification

• Frequency response: 45Hz – 20kHz (-6dB)
• Audio inputs: 1 Audio in, Bluetooth/Wi-Fi, Ethernet, and USB (USB playback is available in the US version. For other versions, USB is for Service only.)

USB specification

• USB port: Type C
• USB rating: 5V DC, 0.5A
• Supporting formats: mp3, WAV
• MP3 codec: MPEG 1 Layer 2/3, MPEG 2 Layer 3, MPEG 2.5 Layer 3
• MP3 sampling rate: 16 – 48 kHz
• MP3 bitrate: 80 – 320 kbps

Wireless specification

• Bluetooth version: 5.3
• Bluetooth profile: A2DP 1.3.2, AVRCP 1.5
• Bluetooth transmitter frequency range: 2400 MHz – 2483.5 MHz
• Bluetooth transmitter power (For EU): <13 dBm (EIRP)
• Wi-Fi network: IEEE 802.11 a/b/g/n/ac/ax (2.4GHz/5GHz)
• 2.4G Wi-Fi transmitter frequency range: 2412 – 2472 MHz (2.4 GHz ISM Band, USA 11 Channels, Europe and others 13 Channels)
• 2.4G Wi-Fi transmitter power (For EU): <20 dBm (EIRP)
• 5G Wi-Fi transmitter frequency range: 5.15 – 5.35GHz, 5.470 – 5.725GHz, 5.725 – 5.825GHz
• 5G Wi-Fi transmitter power( For EU): 5.15 – 5.25GHz <23dBm, 5.25 – 5.35GHz & 5.470 – 5.725GHz <23dBm, 5.725 – 5.825GHz <14dBm (EIRP)

Dimensions

• Dimensions (W x H x D): 342 x 195.6 x 180.3 mm / 13.46” x 7.7” x 7.1”
• Weight: 4.9 kg / 10.8 lbs
• Packaging dimensions (W x H x D): 403 x 272 x 272 mm / 15.9” x 10.7” x 10.7”
• Packaging weight: 7.21 kg / 15.9 lbs

1. Information on power consumption
   • This equipment complies with European Commission Regulation (EC) No 1275/2008 and (EU) No 801/2013.
   • Off: N/A
   • Standby (when all wireless connections are deactivated): < 0.5 W
   • Networked standby for the speaker: < 2.0 W
2. The time after which the power management function switches the equipment automatically into:****
   Off| N/A|
   ---|---|---
   Standby| When all wireless network connections

are deactivated

| Switched to standby mode immediately
Networked standby| When any wireless network connection is activated| Switched to networked standby mode after 10 minutes of inactivity in operational mode
3. If this equipment has wireless network connections:

• How to activate wireless network connections:
• Activate after every power cycle;
• Switch into a wireless mode (Bluetooth, Chromecast built-in™, AirPlay 2 casting audio, Alexa Multi-Room Music &, etc).
• How to deactivate wireless network connections:
• Hold for more than 10 seconds, and then press .

FCC

This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-003 (B) / NMB-003 (B)

IC Caution:

User should also be advised that:

1. the device for operation in the band 5150 – 5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
2. the maximum antenna gain permitted for devices in the bands 5250 – 5350 MHz and 5470 – 5725 MHz shall comply with the e.i.r.p. limit: and
3. the maximum antenna gain permitted for devices in the band 5725 – 5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.
4. Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250 – 5350 MHz and 5650 – 5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

High-power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device.
No configuration controls are provided for this wireless equipment allowing any change in the frequency of operations outside the FCC grant of authorization for US operation according to Part 15.407 of the FCC rules.
FCC/IC Radiation Exposure Statement: This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Use Restriction: This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range in the following countries:

| BE| EL| LT| PT
---|---|---|---|---
BG| ES| LU| RO
CZ| FR| HU| SI
DK| HR| MT| SK
DE| IT| NL| FI
EE| CY| AT| SE
IE| LV| PL| UK(NI)

• This product contains open-source software licensed under GPL.
• For your convenience, the source code and relevant build instructions are also available at https://harman-webpages.s3.amazonaws.com/Harman_One_OS_A_package_license_list.htm
• Please feel free to contact us at  Harman Deutschland GmbH
• ATT: Open Source, Gregor Krapf-Gunther, Parkring 3 85748 Garching bei Munchen, Germany or_OpenSourceSupport@Harman.com_if you have additional questions regarding the open source software in the product.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
• Wi-Fi CERTIFIED 6™ and the Wi-Fi CERTIFIED 6™ Logo are trademarks of Wi-Fi Alliance®.
• Google, Android, and Chromecast built-in are trademarks of Google LLC.
• Google Assistant is not available in certain languages or countries.
• Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards.
• Apple and AirPlay are trademarks of Apple Inc., registered in the U.S. and other countries.
• To control this AirPlay 2–2-enabled speaker, iOS 13.4 or later is required.
• Amazon, Alexa, and all related marks are trademarks of Amazon.com, Inc. or its affiliates.
• Google, Android, and Google Play are trademarks of Google LLC.
• Use your phone, tablet, or computer as a remote control for Spotify. Go to spotify.com/connect to learn how.
• The Spotify Software is subject to third-party licenses found here: https://www.spotify.com/connect/third-party-licenses.

References

• . Spend less. Smile more.
• Spotify - Connect
• Anatel — Agência Nacional de Telecomunicações
• Official JBL Store - Speakers, Headphones, and More!
• harman-webpages.s3.amazonaws.com/Harman_One_OS_A_package_license_list.htm
• Third Party Licenses | Spotify for Developers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>