DUO i11 L1 TWS Earphones V5.2 + EDR User Manual

TWS Earphones V5.2 + EDR
User Manual

Specifications

True wireless stereo (TWS), real no wires design, individual left, and right channels, HIFI sound. Both the left and right earbuds are Bluetooth enabled, and could be used separately, or used as one pair.

400mAh
Talk/Play time:| Playback time: 2-3 hours
Talk time approx: 4 hours
Standby time:| Both ears can stand for 6 hours

Headphone use steps and special instructions

1. Turn on the charging box switch (blue or red light is on)
2. Open the top cover of the charging box and take out the earphones. (Important note: Turn on the charging box switch before opening the charging box, which is the premise of the headset automatically turning on)
3. Pair with other devices: Open the phone or other device’s Bluetooth settings, search for the Bluetooth name, and click to connect to Bluetooth.
4. The headset is placed in the charging box to enter the charging mode, and the headset is automatically turned off.
5. TWS wireless headphones can be connected separately and separately to other Bluetooth devices.
6. TWS wireless headset will automatically shut down if it is not connected to the Bluetooth device for 5 minutes.

Headphone touch function description

1. Press and hold for 3 seconds to start the automatic pairing (you can also pick up the automatic pairing at boot).
2. After booting, the left and right ears support the independent pop-up function for the Apple mobile phone.
3. Press 2 seconds to reject the call, short press to answer, and short press to hang up.
4. When the mobile phone is connected to standby, short press to play music, short press to pause playback.
5. After the two headphones are paired, the primary and secondary headphones are automatically generated.
6. When listening to the song, the main ear continuously touches 2 times to play the next song, and a long press for 2 seconds will “click” for a volume. When added to the maximum, there will be an English broadcast prompt for the maximum volume.
7. The double ear is the last song. Press and hold for 2 seconds to make a “beep” sound to reduce the volume until there is no sound.
8. Touch 3 times in a row to wake up the Apple SIRI function (Android, wake up voice assistant).
9. Press and hold for 3 seconds to turn off (automatically turn off when the charging and charging compartment is charged).

Warnings:

1. Please do not overuse this earphone or put it under heavy pressure, keep away from wet and heat.
2. Keep away from WIFI, router, or other high-frequency transmitting equipment to prevent interruption receiving.
3. Please use this earphone under its working range(10m), and the effect would be better if there is no between the connected devices.
4. Use this Bluetooth earphone to connect any device with Bluetooth function.

Overview

1. Headphone dust screen
2. Multi-function touch button e mic
3. Charging port
4. Charging port of the Charging box
5. Charging box switch

Specific Absorption Rate (SAR) certification information
Your device conforms to U.S. Federal Communications Commission (FCC) standards that limit human exposure to radio frequency (RF) energy emitted by radio and telecommunications equipment. These standards prevent the sale of mobile devices that exceed a maximum exposure level (known as the Specific Absorption Rate, or SAR) of 1.6W/kg.
SAR information on this and other model devices can be accessed online on the FCC’s website throughtransition.fcc.gov/oet/rfsafety/sar.html.
In normal use, the actual SAR is likely to be much lower, as the device has been designed to emit only the RF energy necessary to transmit a signal to the nearest base station. By automatically emitting lower levels, when possible, your device reduces your overall exposure to RF energy.
The FCC has granted an Equipment Authorization for this model device based on the compliance of all reported SAR levels with the FCC RF exposure guidelines. This device has an FCC ID number: 2AZP5-L1EBAL [ Model Number: L1 ] and the specific SAR levels for this device can be found at the following FCC website: www.fcc.gov/oet/ea/.

FCC Warning

Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Information to the user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to rovide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed nd used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a articular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user  s encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

Absorption Rate (SAR) information:
This device meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluations of scientific studies. The standards include a substantial safety margin designed to assure the safety of all people regardless of age or health.
FCC RF Exposure Information and Statement The SAR limit of the USA (FCC) is 1.6 W/kg averaging over one gram of tissue. This device was tested for typical body-worn operations with the head 0mm and 0mm from the body. Maintain compliance with FCC RF exposure requirements, and use accessories that maintain an appropriate separation distance between the user’s body and the back of the device. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements does not comply with FCC RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>