MAJORITY D80 Bookshelf Speakers User Manual

: June 15, 2024
: MAJORITY

Table of Contents

MAJORITY D80 Bookshelf Speakers
Product Usage Instructions
WHAT’S IN THE BOX
CONTROLS & FUNCTIONS
SETTING UP YOUR MAJORITY D80 SPEAKERS
BASIC OPERATION
CONNECTING WITH A TV
BLUETOOTH MODE
USB & SD CARD MODE
CONNECTING HEADPHONES
SPEC & WARRANTY
SAFETY INFORMATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MAJORITY D80 Bookshelf Speakers

Product Usage Instructions

Setting Up Your Majority D80 Speakers:

To set up your Majority D80 Speakers, please follow these steps:

Connecting and powering the unit:
- Using the power cord provided, plug one end into the back of the primary speaker and plug the other end into a mains socket.
- Switch the unit on at the back of the primary speaker.
Connect the two speakers together via the speaker connector cable:
- Plug the left speaker connector cable plug into the right (primary) speaker connector.
Switch on your Majority D80 Speakers:
- Press the power button to switch on the speakers.
- Press the power button again to switch the speakers off.
Remote Power:
- Remove the battery cover of the remote control.
- Insert 2 x AAA batteries (excluded).
- Replace the battery cover.
- Note: when using the remote control, ensure that you are pointing at the remote sensor otherwise the unit may not respond to key presses.

Basic Operation

To operate your Majority D80 Speakers, please follow these steps:

Power: Press the power button to switch on or off the speakers.
Volume: Use the volume up and volume down buttons to adjust the speaker volume.
Previous track: Press the previous track button to go to the previous track.
Next track: Press the next track button to go to the next track.
Optical mode: Press the optical mode button to switch to optical mode.
USB mode: Press the USB mode button to switch to USB mode.
Music mode: Press the music mode button to switch to music mode.
Mute: Press the mute button to mute or unmute the speakers.
Play/pause: Press the play/pause button to play or pause the current track.
ARC mode: Press the ARC mode button to switch to ARC mode.
BT mode: Press the BT mode button to switch to Bluetooth mode.
Line mode: Press the line mode button to switch to line mode.
Dialog mode: Press the dialog mode button to switch to dialog mode.
Movie mode: Press the movie mode button to switch to movie mode.

WHAT’S IN THE BOX

A. Majority D80 Bookshelf Speakers
B. 3.5mm to 3.5mm AUX Cable
C. 3.5mm to RCA Cable
D. Instructions Guide
E. Remote Control
F. Power Adapter
G. Digital Optical cable

CONTROLS & FUNCTIONS

FRONT AND BACK VIEW

1. Remote Sensor
2. Speakers
8. Digital Optical cable
9. USB
10. High speed ARC cable
13. Power adapter
11. Stereo RCA to 3.5mm audio
12. RCA to RCA audio cable

REMOTE CONTROL

Power
Volume up
Previous track
Volume down
Optical mode
USB mode
Music mode
Mute
Play/pause
Next track
ARC mode
BT mode
line mode
Dialog mode
Movie mode

SETTING UP YOUR MAJORITY D80 SPEAKERS

Connecting and powering the unit

Using the power cord provided, plug one end into the back of the primary speaker and plug the other end into a mains socket. Switch the unit on at the back of the primary speaker .
Connect the two speakers together via the speaker connector cable. To do this, plug the left speaker connector cable plug into the right (primary) speaker connector.

Switch on your Majority D80 Speakers

Press the button to switch on the speakers. Press the button to switch the speakers off.

Remote Power

Remove the battery cover of the remote control. Insert 2 x AAA batteries (excluded).
Replace battery cover.

Note: when using the remote control, ensure that you are pointing at the remote sensor otherwise the unit may not respond to key presses.

BASIC OPERATION

Basic controls

Volume, treble and bass can be changed on all speaker modes.
On the remote control, use the Vol+ & Vol- buttons to control the volume. Press MUTE to mute the audio.
Alternatively on the rear of the main speaker, use the Volume dial to increase and decrease volume.
Use the Treble & Bass dials on the rear of the main speaker to control the bass and treble settings of the sound
In Bluetooth or USB mode, use the buttons to skip tracks and rewind or fast forward.

Switching mode

Select the correct mode using the Mode option buttons on the remote control, or press the ‘input’ button on the rear of the main speaker.
The mode selected is indicated by LED light colour on the front of the main speaker:

Dark Blue – Bluetooth
White – Optical
Light Blue – Line In/RCA
Purple – USB
Green – HDMI Arc

CONNECTING WITH A TV

Active Speaker

A. Set the TV’s audio output to optical or PCM.
B. Set Connecting using a RCA to 3.5mm audio cable. Select RCA mode.
C. Set the TV’s audio output to HDMI or PCM.

BLUETOOTH MODE

To connect an external device to the D80 speakers, ensure that the speakers are in ‘Bluetooth’ mode. Select ‘Bluetooth’ mode manually by using the ‘BT’ button on the remote control, or pressing the ‘input’ button on the main speaker.
The corresponding mode indicator light lights up dark blue and will flash.
Switch Bluetooth on for your external device. Select ‘Majority D80’ from the list of devices. When your external device is connected, you will hear an audible sound to indicate successful connection. The indicator light will remain static. You can now play audio through the speakers.
When Bluetooth is disconnected, you will hear an audible sound to indicate successful disconnection, plus the indicator light will resume flashing.

USB & SD CARD MODE

USB

To use USB mode, ensure that the speakers are in ‘USB’ mode. Select ‘USB’ mode manually by using the ‘USB’ button on the remote control, or pressing the ‘input’ button on the main speaker.
The corresponding mode indicator light lights up green.
Insert a USB drive into the USB port and use the remote control functions to play, pause and navigate through files.

CONNECTING HEADPHONES

Observation	Potential Cause/Solution
No power/function	Check whether the power is switched on or off at

the wall.

Check that the power adaptor is properly connected to the power outlet.

No sound| Check whether unit is set to MUTE.

Check whether MODE is correctly selected. Turn up the volume on the speakers or on your external device.

Check that cables are properly installed.

Function disturbance| Switch off and unplug the unit. Leave it for 2 minutes and switch it on again.
Bluetooth not connecting| Ensure that you are on Bluetooth mode on the speaker and the Bluetooth on your device is switched on. Select the Bluetooth device ‘D40’ and you should now be able to play audio.

SUPPORT

If you require further assistance with your new soundbar, please contact our support team on the Majority website: www.majority.co.uk/support

SPEC & WARRANTY

SPECIFICATION

Power Supply	100-240V/50-60Hz
Mode:	Bluetooth Line in ARC

USB reader

Optical

WARRANTY

All products come with a standard 12 month warranty. All items must be registered on www.majority.co.uk for the warranty to be valid. Once on the web page, use the menu to find “Register Your Product”. You will also be given the chance to extend your warranty for an additional 24 months, free of charge.

3 YEAR WARRANTY

Register your product online for a FREE 3 year extended warranty at: www.majority.co.uk

SAFETY INFORMATION

Read these instructions.
Keep these instructions. Instructions are also available for download at www.majority.co.uk
Heed all Warnings
Follow all instructions
Do not clean the apparatus near or with water
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during light storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to the rain or moisture, does not operate normally or has been dropped.
No naked flame sources, such as lit candles, should be placed on the apparatus.
Dispose of used electrical products and batteries safely according to your local authority and regulations.

ADDITIONAL WARNINGS

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be places on the apparatus.
Main plug is used to disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the main mains completely, the mains plug should be disconnected from the main socket outlet completely.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

RECYCLING ELECTRICAL PRODUCTS

You should now recycle your waste electrical goods and in doing so help the environment.
This symbol means an electrical product should not be disposed of with normal household waste. Please ensure it is taken to a suitable facility for disposal when finished with.

IMPORTANT: Please read all instructions carefully before use and keep for future reference.