MAJORITY 2IR Internet Radio and Adapter Installation Guide

MAJORITY 2IR Internet Radio and Adapter Installation Guide

Controls And Functions

Front view

1. DISPLAY

2. Button

3. REMOTE CONTROL SENSOR
   Rear view
   
   

4. DC IN SOCKET

5. LINE OUT SOCKET (RCA Jack)

6. OPTICAL OUT CONNECTION

7. ANTENNA

Remote control

1. STANDBY Button
2. SLEEP Button
3. CLOCK Button
4. DAB Button
5. SPOTIFY Button
6. MODE Button
7. Button
8. 7 Button
9. SELECT Button
10. EQ Button
11. VOLUME + / – Buttons
12. Number Buttons
13. MONO/ST. Button
14. SNOOZE Button
15. ALARM Button
16. SCAN Button
17. BT Button
18. INTERNET Button
19. INFO Button
20. 8 Button
21. s Button
22. PRESET Button
23. MENU Button
24. PRESET . / , Buttons
25. BACK Button
26.  MUTE Button

What’s In the Box?

Box Contents

A. Main Unit
B. Instruction Manual
C. ANTENNA
D. Mains Adapter
E. Remote

Instructions Guide

Battery Replacement for the Remote Control

1. Press down the battery cover at “ ” and push the battery cover outwards in the direction of the arrow.
2. Insert 2 x AAA 1.5V alkaline batteries (not included). Make sure to match the (+) and ( – ) ends of the battery with the (+) and ( – ) ends indicated in the battery compartment.
3. Close the cover.

Handling the Battery

• Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause fire, personal injury or damage to property.
• Only use the battery type indicated in this manual.
• Do not dispose of the used battery as domestic waste. Dispose of it in accordance with local regulations.
• Remove the battery from the remote control when not in use for a long period of time, as corrosion or battery leakage may occur and result in physical injury, and/or property damage, and/or fire.

Remote control operation range
The remote control sensor on the front unit is sensitive to the remote control’s commands up to a maximum of 4 metres away and within a maximum of 60° arc.
Note that the operating distance may vary depending on the brightness of the room.

Connection

1. The audio output (analogue) and optical out (digital) are available on the back of the unit to connect A/V ampli fier or HiFi system.

2. Unwind the antenna included to the desired length and insert into the ‘Antenna’ port on the back of the unit.

3. Unwind the mains adapter cable to its full length. Connect the end of the cable to the DC IN Socket at the DC IN Socket at the rear of the unit and then insert the power adapter into the mains socket. Make sure the mains adapter is firmly inserted into the power socket. The unit is now ready to use.
   Connecting the unit to any other power source may damage the unit.

4. To switch the unit or completely, unplug the power adapter from the mains socket.

Network Connection

1. This product only supports wireless network connection for networking access and does not support wired LAN Connection.
   Wireless network

2. Check first of all whether the control lamps (LINK/ACT) of your router light up.

3. Proceed with the operations described in the below “Getting Started”. It is recommended to run through the setup wizard in the System Settings section.

__This unit cannot be connected to a standalone modem directly. A router or a modem connected to a router has to be used.
Since there are various connection configurations, please follow the specications and instructions of your telecommunication carrier, Internet service provider, and router setting guidebook.

Getting Started

This instruction manual explains the basic instruction for operating this unit. Unless otherwise stated, all operations described are based on remote control use.

Powering ON/OFF

1. Press the q button on unit or remote control to switch the unit on.
2. Press the q button on unit or remote control to switch the unit back to standby

Selecting Modes
Press MODE button on remote control to access Mode Menu. Press 7 / 8 button to switch between different sources: Internet Radio, Podcasts, Spotify,
DAB, FM and Bluetooth. Press SELECT button to confirm.

When the unit is idle for approximately 15 minutes in Internet radio, Podcasts, Spotify, DAB or Bluetooth mode (with external unit disconnected), it will automatically switch to Standby.
To switch the unit o completely, remove the mains plug from the main socket.
Please turn the unit o completely to save energy when not in use

Adjusting the Volume

• Press VOLUME +/- buttons to adjust the volume.
• To temporarily mute the sound press the MUTE button on the remote control. Press the MUTE button again, or press the VOLUME +/– buttons on the remote control to resume normal listening.

Navigating the Menu

1. Press the MENU button to access the menu.
2. Press the buttons to select your choice.
3. Press the SELECT button to corm your selection.

Instructions Guide

Initial Set-up
When you rst connect the unit to the mains socket, the display will show the start-up screen, followed by ‘Language menu’. To select the language of your choice, press  buttons to nd your preferred language.
Press the SELECT button to conrm your selection. Once the language has been selected, the privacy policy page will come up next. Please visit the website mentioned in the page to view the details of the privacy policy. Press SELECT button on remote control to conrm and move onto the next step.

Privacy notice

Please visit the following page on a PC or mobile device. www.frontiersmart.com/privacy

1. To launch the initial ‘Setup wizard’, press buttons to select [YES]. Press SELECT button to conrm.
2. Right after you can select the time format. Choose the clock time format as per your preferences, either to [12] or [24] hours. Press SELECT button to conrm and move onto the next step. Next, select which source (DAB/FM/ NETWORK/NO UPDATE) the unit uses as a source to obtain and update the time and date. If “Update from Network” Is selected proceed to the next step and select the time zone, to ensure that this correctly displayed. Right after, you can also choose the “Daylight savings” which can be set to [ON] or [OFF].
3. Onto next screen, you can specify whether the product should remain connected to the Network when on Standby mode. Press  buttons to select [YES], then press SELECT button to conrm.
4. Robinson 2IR, will now scan for your wireless network, this may take a few seconds then a list of all the wireless networks available will appear on the screen. Select the WLAN network you know and whether to use WPS (Push Button/Pin) or Skip WPS to enter the password using the displayed keyboard

Connecting using the WPS button on your router
Connecting using the WPS (Wi-Fi Protected Setup) button on your router is a quick and easy way to connect your radio without having to type in a password.
Select one of the following connection methods:

Push WPS Button

• Press buttons to select the option Push Button. Press SELECT button to conrm.

• A message will be displayed on the screen, telling you to press the WPS button on your router which you need to then press.
  Note: Refer to your router user manual to identify the WPS button, if in doubt.

• Press the SELECT button to conrm. Robinson 2IR will now connect to your router.
  This may take a few seconds.

Pin (code number)

• Press  button to select PIN. Press SELECT button to conrm. The radio will generate an 8-digit code number, which will be displayed on radio’s screen.
• Refer to your router user manual to follow the WPS instructions, when using a pin code number. Enter this code number into the wireless router to connect with Robinson 2IR.
• Press SELECT button to continue.

Connecting using your wireless network password
When using a router with no WPS button, you will be asked to enter your password to connect your Robinson 2IR with your wireless network. Alternatively, select SKIP WPS to go straight to password screen.

1. Press buttons to select each letter/number of your password. Press SELECT button to enter the selected letter/number.
2. Once the password has been entered, press buttons, to conrm by selecting OK on the right hand-side of the screen. It takes a few seconds to connect with your network.
3. After your radio has connected, press SELECT button to exit the setup.

Settings can be changed at any time in Menu- System Settings – Network – Network wizard
This instruction manual explains the basic instruction for operating this unit. Unless otherwise stated, all operations described are based on remote control use.

System Settings

• Press MENU button to display the menu. Press 12 w / s buttons to select System settings and then press SELECT button to conrm.

Equaliser
This system supports a variety of equalizers and sound eects.

• Press the EQ button to access Equaliser menu Alternatively,
• While in the System settings mode, press the 12 w / s buttons to select Equaliser and then press the SELECT button to conrm.

1. The display will show : NORMAL > CLASSIC > ROCK > POP > JAZZ > MY EQ > MY EQ PROFILE SETUP
2. Press the 12 w / s buttons to select and then press the SELECT button to conrm.
3. For [MY EQ] , please go to [My EQ Prole Setup] for custom setting before selecting this option.
4. While in [My EQ Prole Setup], press to select [Bass/Treble] and then press SELECT button to conrm. Press 12 w / s to select desired level and then press SELECT button to conrm.
   Press BACK button to exit and then press 7 / 8 buttons to select [YES] and press SELECT button to conrm. The Display will show  Equalizer Saved.
   
   

Network

1. While in System Settings mode, press the 12 w / s buttons to select Network and press the SELECT button to con rm.
2. Press the 12 w / s buttons to select from the following settings, and then press the SELECT button to con rm.
   Network wizard| SSID – select the desire wireless network. Rescan – Scan for available networks.

Manual config – select wireless network with DHCP enable/

disable.

---|---
PBC Wlan setup| Press the WPS button on the modem device that you wish to connect with. Press SELECT button to continue.
View settings| Display the setting on the unit.
---|---
Manual settings| Select DHCP enable/disable.
NetRemote PIN Setup| To define a PIN number to be entered before being able to

connect to the unit remotely over a network

Network profile| View the connected network.
Clear network settings| To delete the connected network memory in Network profile.
Keep network connected| To define whether remains connected to its network in

Standby mode and when not in Network radio mode.

3. Press the BACK button to cancel the setting and return back to the previous menu.

Time/Date
The Time/Date can be automatically set once it has been connected to the
Internet, DAB or FM radio station with time/date information. You may also adjust the Time/Date manually.
Press CLOCK button to access Set Time/Date menu to adjust Time/Date, Alternatively,

1. * While in System Settings mode, press the 12 w / s buttons to select Time/  

   Date and press the SELECT button to conrm. Press the 12 w / s buttons to select Set Time/Date and press the SELECT button to conrm.

2. The date digits will ash onto the radio screen.

3. Press the buttons to adjust the date, then press the SELECT button to conrm.

4. Repeat above Step (2) to set the Month/Year/Hour/Minute.

5. The date and time settings are now completed.

For the other settings under Time/Date, press the buttons to select from the following options and then press the SELECT button to conrm.

Network is on.)
Daylight savings| Select daylight savings. (Only available when Auto update from Network is on.)

The default auto time update setting is “Update from Network”. If you would like to manually set the time, it is recommended to turn the Auto update function o.

Inactive Standby
Use the Inactive Standby to turn o the unit after a certain time in play mode.

1. While in System settings mode, press the buttons to select Inactive Standby and press SELECT button to conrm.
2. Press buttons to select between off, 2 hours, 4 hours, 5 hours and 6 hours. Press SELECT button to con rm.

Language

1. While in System settings mode, press the buttons to select Language and then press the SELECT button to con rm.
2. Press the buttons to change the display language of your choice.
3. Press the SELECT button to con rm.

Factory Reset
Factory reset would be recommended when experiencing issues with radio reception, moving houses, moving to a dierent part of the country, when the Robinson 2IR may pick up the local and national DAB stations in that area, therefore previously tuned channels may no longer be available.

1. While in System settings mode, press the buttons to select Factory reset, and press the SELECT button to con rm.
2. Press 7 / 8 buttons to select [Yes], and press the SELECT button to conrm or select [No] to cancel.

After the system reset, all the tuned stations, Internet, DAB & FM preset stations will be erased.

Software update

1. While in System settings mode, press the buttons to select Software update and then press the SELECT button to con rm.
2. Press the buttons to select “Auto-check setting” or “Check now”, and then press the SELECT button to con rm.

Before downloading software, ensure that the radio is plugged into a stable mains power connection.
Interrupting the mains supply during software download can lead to functional disturbances and/or damage to the unit!

Setup wizard
The setup wizard is available in the System settings section; you can run through this to congure settings for date/time and network. Once this has nished, your radio is ready to use.

Info

1. While in System settings mode, press the buttons to select Info and then press the SELECT button to confirm.
2. The software version, Spotify version, Radio ID and Friendly name will show on the

Privacy policy

1. To view the Privacy policy page, press MENU to go to System settings – Privacy
2. After ‘Factory reset’, you need to read and agree with the Privacy policy

Back light

1. While in System settings mode, press the buttons to select Back light and then press the SELECT button to confirm.

2. For the other settings under Back light , press the buttons to select the following options and then press the SELECT button to

Medium/ Low/ Off

Internet Radio

To listen to Internet radio station your radio must be connected to the Internet. Try positioning your radio as close as possible to your router to get the best connection speeds. When Internet Radio mode is selected, the radio connects with the Frontier Silicon Internet radio portal to download a list of stations. Once a station is selected, the radio will connect directly to that station.

Press MODE button on remote control to access Mode Menu.
Press button to select and press SELECT button to switch to “Internet radio” mode.

While in Internet Radio mode, press the MENU button on remote control to access the menu. You can choose between: Last listened, Station list, System settings and Main menu. Press  buttons to select and press the SELECT button to con rm.

When internet radio is restarted, the last listened stations is automatically selected. To return to [Station List], press BACK button.

Last listened

1. Press buttons to select [Last listened], then press SELECT button to conrm.
2. Press buttons to select the history of stations that you have listened to before and press SELECT button to conrm.

Station List
While in Internet Radio mode, press MENU button to access the menu. Press the buttons to select [Station List] and press the SELECT button to conrm.

When Internet radio is restarted, the last listened stations is automatically selected. To return to [Station List], press BACK button.
If it is the rst time listen Internet radio, the radio will be in [Station List].

1. Press the buttons to select from the following options, and then press the SELECT button to con rm.

“Countries”| You can search specifically for stations from your country. Within this scope,it will display local radio stations available at your location.
---|---
Search| You can search stations using various keywords. The name and a description of your selected station will show on the display.
Location| You can select radio stations from a list of countries available
Popular| Select station from a list of the most popular internet stations from around the world.
Discover| Select stations from various categories in the menu: Country, Genre or Language.

Press the BACK button to move back a menu level.

Preset Stations
The preset Internet radio stations are stored in the radio and cannot be accessed from other radios.

1. To store a preset, you must rst be listening to the station that you would like to save. Press and hold the PRESET button until the display shows the “Save to Preset”.

2. Select one of the 30 presets to store the current station by pressing buttons to select the number and press the SELECT button to conrm. The display will show “Preset stored” and then save the station Alternatively, press and hold number keys (0-9) on remote control can store to preset 1-10 directly,

Recalling a Stored Station

1. To select a preset, press the PRESET button, and then press the buttons to select one of the listed preset stations.
2. Press the SELECT button to conrm the selection.
3. If there no station be saved, it will show Preset empty.
   Or press PRESET . / , button repeatedly can switch between stored preset stations

Alternatively, press number keys (0-9) can play preset station (1-10) directly,  Operation of Preset and Recall stations are same for Internet Radio, Podcasts, DAB and FM.

Internet Radio Display Modes
Every time you press the INFO button, the display will show the following display modes:

Channel Info/Description- Language/Location – Bit rate/Sound format/ Sampling rate – Playback buer – Date

Podcasts

To listen to Podcasts your radio must be connected to the internet. Try positioning your radio as close as possible to your router to get the best connection speeds.

Press MODE button on remote control to access Mode Menu. Press button to select and press SELECT button to switch to “Podcasts” mode.
While in Podcasts mode, press the MENU button on remote control to access the menu. You can choose between: Last listened, Podcast list, System settings and Main menu.
Press 12 w / s buttons to select and press the SELECT button to conrm.

Last listened

1. Press buttons to select [Last listened], then press SELECT button to conrm.
2. Press buttons to select the history of stations that you played beforehand and press SELECT button to conrm.

Podcast List
While in Podcasts mode, press MENU button to access the menu. Press the buttons to select [Podcast list] and press the SELECT button to conrm. When radio is restarted, the last listened stations is automatically selected. To return to [Podcast list], press BACK button.
If it is the rst time listen Podcast, the radio will be in [Podcast list].

1. Press the 12 w / s buttons to select from the following options, and then press the SELECT button to conrm.

“Countries”| You can search specifically for stations from your country. Within this scope,it will display local radio stations in your location.
---|---
Search| You can search stations using various keywords. The name and a description of your selected station will show on the display.
Location| You can select for stations from a list of countries available
Discover| Select stations from various categories in the menu: Country, Genre or Language.

Saving and Recalling Preset Station

• Refer to “Preset Stations” and “Recalling a Stored Station” under Internet Radio for instruction.

DAB Operation

Press MODE button on remote control to access Mode Menu. Press button to select and press SELECT button to switch to “DAB radio” mode.
Alternatively, press DAB button on remote to switch to DAB mode.

The unit will enter DAB mode and perform the auto scan function. During the scan the display will show “Scanning… ” together with a slide bar that indicates the progress of the scan and the amount of stations that have been found so far.
Once the scan has nished, the unit will select the rst alphanumerically found station.
To explore the found stations, press the buttons to select and press the SELECT button to conrm.

Station List

1. While in DAB mode, press the MENU button to access DAB menu.
2. Press the buttons to select Station list and then press the SELECT button to conrm.
3. A list of DAB stations will show on the display.

Auto Scan
Press SCAN button on remote control to activate auto scan. Alternatively,

1. * Press the **MENU** button, and then press the buttons to select Scan.  

   Press the SELECT button to conrm to activate auto scan.

2. The display will show “Scanning…” and a progress slide bar.

3. All the stations that have been found will be stored automatically. To explore and listen to the found stations, press the buttons to select and then press the SELECT button to conrm.

Manual Tuning
As well as the auto tune function, you can manually tune the receiver. This can help you when aligning your aerial or when adding stations that were missed while auto tuning.

1. Press MENU to display the menu.
2. Press the buttons to select Manual tune, and press the SELECT button to conrm.
3. The display will show the multiplex 5A to 13F.
4. Press the buttons to select the channel, and press the SELECT button to conrm.
5. To listen to any stations found, return to the now playing screen and press buttons to select the required station from the station list and press SELECT button to conrm.

DAB Display Modes
Every time you press the INFO button, the display will show the following display modes:

DLS – Programme Type – Ensemble/Frequency – Signal error/Strength – Bit rate/Codec/Channels – Date

DLS (Dynamic Label Segment)
This is a scrolling message giving real-time information, e.g. song titles, news headlines, etc.

Programme Type
This describes the “style” or “genre” of the programme that is being broadcast.

Ensemble Name/Frequency
This display the name of the multiplex that contains the station you are listening to and the frequency. A multiplex is a collection of radio stations that are bundled and transmitted on one frequency. There are national and local multiplexes. Local ones contain stations that are specic to that area.

Signal Error/ Signal Strength
The error is shown as a number. If the number is 0, it means the signal received is error free and the signal strength is strong. If the error rate is high, it is recommended to reposition the radio aerial or reposition the unit. The display will show a slide bar to indicate the signal strength, the stronger the signal, the longer the bar will be from left to right.

Bit Rate / Codec / Channels
The display will show the digital audio bit rate being received with additional information about the audio codec and channel conguration.

Date
This displays the current date provided automatically by the broadcaster.

Prune Invalid
You may remove all unavailable stations from the list.

1. During DAB mode, press the MENU button and press the 12 w / s buttons to select Prune invalid, press SELECT button to conrm.
2. Press the 7 / 8 buttons to select YES and press the SELECT button to conrm. Or select NO to cancel.

DRC (Dynamic Range Compression)
If you are listening to music with high dynamic range in a noisy environment, you may wish to compress the audio dynamic range.

1. During DAB mode, press the MENU button and press the 12 w / s buttons to select DRC, press the SELECT button to conrm.
2. Press the 12 w / s buttons to select DRC high/low/off and press the SELECT button to conrm the setting.

Station Order
You may wish to arrange the station listing order.

1. During DAB mode, press the MENU button and then press the 12 w / s buttons to select Station order, press SELECT button to conrm.
2. Press the 12 w / s buttons to select Alphanumeric/Ensemble and press the SELECT button to conrm the setting.

Saving and Recalling Preset Station

• * Refer to “Preset Stations” and “Recalling a Stored Station” under Internet Radio for instruction.

FM Operation

To switch the unit to FM mode, press MODE button on remote control to access Mode Menu. Press 7 / 8 button to select and press SELECT button to switch to “FM radio” mode.
Alternatively, press FM button on remote to switch to FM mode.
The display will show the frequency.

Auto Scan
Press SCAN button on remote control to activate auto scan. Alternatively,

• Press and hold the 7 / 8 buttons to start searching for a staion backwards or forwards. Once a station has been found, the scanning will stop automatically.

The search may not stop at a station with a very weak signal

Manual Tuning
To search for FM stations manually, press the 7 / 8 buttons repeatedly until your desired frequency is reached.

With FM radio, it may be necessary to ne tune each station by pressing / buttons repeatedly. Each press will adjust the frequency by 0.05 MHz. If reception is still poor, adjust the position of the aerial or try moving the radio to another location.

FM Display Modes
Every time you press the INFO button, the display will show the following display modes: Radio Text – Programme Type – Frequency – Date

RDS Radio Text
This is a scrolling message information about the current programme.

Programme Type
This describes the “Style” or “Genre” of music that is being broadcast.

Station Name / Frequency
When an RDS station is received, the name of that station will be displayed, or if not the frequency will be displayed.

Scan Setting

1. Press the MENU button to access FM menu.
2. Press the 12 w / s buttons to select Scan setting and then press the SELECT button to conrm.
3. Press the 7 / 8 buttons to select Yes to receive strong signal only and then press the SELECT button to conrm.

Audio Setting

1. Press the MONO/ST. button on the remote control to toggle between the Mono only or Mono/Stereo selection. Alternatively,
2. Press the MENU button to access the main menu.
3. Press the 12 w / s buttons to select Audio setting and press the SELECT button to conrm.
4. Press the 7 / 8 buttons to select YES to listen in mono only or NO to let the unit select Stereo or Mono automatically.
5. Press the SELECT button to conrm.

Saving and Recalling Preset Station

• Refer to “Preset Stations” and “Recalling a Stored Station” under Internet Radio for instruction.

Bluetooth Operation

The unit has a Bluetooth function that can receive a signal within 8 metres. Pair the unit with a Bluetooth device such as a phone or a tablet to play audio from:

• Press MODE button on remote control to access Mode Menu. Press 7 / 8 button to select and press SELECT button to switch to “Bluetooth Audio” mode.
  Alternatively, press BT button on remote to switch to Bluetooth mode
  The Bluetooth logo will start to ash to show the unit in pairing mode.

• Activate your Bluetooth device and select the search mode.

• “Majority Robinson 2IR” will appear on your Bluetooth device list.

• Select “Majority Robinson 2IR” and enter “0000” for the password if necessary. Once connected the Bluetooth logo on the screen will stop ashing. Your device is now paired with the unit.

• Press BT button on remote control can disconnect existing Bluetooth connection, with other Bluetooth devices able to locate and make connection with the unit.

• To disconnect the Bluetooth function, press the MODE button on remote control to switch to another mode or disable the function from your Bluetooth device.

Playing Music via Bluetooth
You may need to adjust the volume on your radio and Bluetooth device.

• Press 12 w button to play/pause music, or press 7 / 8 buttons to skip to the previous/next track.

• The operational range between the unit and the device is approximately 8 metres.

• For better signal reception, remove any obstacles between the unit and the Bluetooth device.

• Compatibility with all devices and media types is not guaranteed.

• Some mobile phones with the Bluetooth function may connect and disconnect as you make and end calls. This is not an indication of a problem with your unit.

Net Remote

The device gives a feature of NetRemote by smartphone or tablet in iOS or Android system. By downloading the assigned app named UNDOK, you can view all the modes of Internet radio, Podcasts, Spotify, DAB, FM and Bluetooth. Search UNDOK from Google Play or Apple Store for UNDOK app, and install it to your smartphone or tablet.
Before using the UNDOK app, make sure the device and the smartphone or tablet are in the same WiFi network. Launch the app.
The app initializes and scans for the device in the network. Tap the device to make the NetRemote connection.

• Once the smartphone or tablet has already accessed the device, they will automatically connect the next time when you open the app again.
• Be aware that if another smartphone or tablet with the app in the same network has access with the device; the original connection will be cut o.

When it is the rst time that you connect the device to the unit, the app may ask you to enter the PIN. Default PIN is 1234. For details of changing the PIN for security, please refer to System Settings section: Network – NetRemote PIN Setup.

Select your desired mode in the main page. You may then control the selected mode on your smartphone or tablet and on the device simultaneously.

Spotify Connect

Use your phone, tablet or computer as a remote control for Spotify.
Go to spotify.com/connect to learn how.

Licenses
The Spotify Software is subject to third party licenses found here: https://www.spotify.com/connect/third-party-licenses

Sleep Setting

This function allows you to program the unit to switch into Standby mode by itself after a set period of time.

1. To activate the sleep function, press SLEEP button repeatedly. The time will change in the below sequence on every press:
   Sleep OFF  15minutes  30minutes  45minutes  60minutes  90minutes  120minutes

2. When your desired sleep time appears in the display, stop pressing the button and the sleep function will be activated in two seconds. “ ” will show on the display. Next to the sleep icon you will also see the displayed the remaining time until the radio will switch o.

3. When the sleep timer counts down to zero, the unit will switch into Standby mode. To switch the sleep function o while the sleep timer is still counting down, press the SLEEP button repeatedly to select “SLEEP OFF”.

Alternatively,

1. Press the MENU button to display the function main menu. Press the 12 w / s buttons to select Main menu, and then press the SELECT button to conrm.
2. Press the 12 w / s buttons to select Sleep, and then press the SELECT button to conrm.
3. Press the 12 w / s buttons to select sleep timer, and then press the SELECT button to conrm.

Setting the Alarm

1. Press the ALARM button on the remote control, the display shows “Alarm (1 or 2): O [hh:mm]”.
2. Press the 12 w / s buttons to select the Alarm number (1 or 2) and then press the SELECT button to start the setting of the following parameters.
   Press the 12 w / s buttons to select then press the SELECT button to conrm Enable| Off/ Daily/ Once/ Weekends/ Weekdays
   ---|---
   Time| (Alarm On time)
   Mode| Buzz/ Internet radio/ DAB/ FM
   Preset| Last Listened/ (Preset station)
   Volume| 0-32
   Save| Save and confirm the alarm setting
3. Finally, select “Save” and press the SELECT button to save the alarm setting.
   The display will show Alarm Saved. When the alarm is set, the alarm icon will appear on the display

To cancel Alarm, refer to steps 1-3 to set alarm O. The alarm icon will disappear from display.

Alternatively, during Standby mode, press the ALARM button repeatedly can turn the saved Alarm 1/2 on/o sequentially.

Maintenance

Cleaning the Unit
Ensure the unit is fully unplugged from the mains socket before cleaning.

• To clean the unit, wipe the case with a slightly moist, lint-free cloth.
• Do not use any cleaning uids containing alcohol, ammonia or abrasives.
• Do not spray aerosol at or near the unit.

Troubleshooting

If a problem does occur, it may often be due to something very minor. The following table contains troubleshooting.
Troubleshooting

• Ensure the mains adaptor plug is connected.
• Make sure that you select the ON mode.

No sound from the unit.| Please try either one of the solutions below:

• Make sure that the unit is not muted. Press VOLUME+/- buttons resume normal listening.
• Press Standby button to switch the unit to standby mode. Then press the button again to switch the unit on.
• Unplug the unit from the mains socket, then plugthem again. Switch on the unit.

The unit does not respond when pressingany buttons.|

• The unit may freeze up during use. Switch the unit off and then on again at the mains socket to reset the unit.

Radio DAB/FM

• Make sure the DAB/FM aerial is fully extended.
• Electrical interference in your home can cause poor reception. Move the unit away from them(especially those with motors and transformers).

Desired station not found.|

• Weak signal. Search manually.
• If reception is still poor, adjust the position of the aerial.

Internet Radio

• Make sure the Wi-Fi router is plugged in and working.
• Reconnect the radio to your Wi-Fi router.
• Check you radio is within 5m of your router.

Can’t hear the radio station|

• Sometimes the Wi-Fi connection is temporary lost or connection is weak, check the Wi-Fi connection or move the radio closer to your router.
• Not all radio stations transmit 24 hours a day, they might not be transmitting.
• Not all radio stations transmit at the same volumelevel you may need to increase the volume.

Bluetooth

• Ensure the Bluetooth function is activated on your Bluetooth device.
• Re-pair the unit with your Bluetooth device.

Can’t hear the mus|

• You may need to increase the volume on the radio and Bluetooth device.

If any functional abnormality is encountered, unplug the unit from the mains socket and reconnect it again

Specification ****

System Section
Power Supply| Input: 100-240V ~ 50-60Hz 0.2A max. Output: 5.9V/1.0A
Power Consumption| 5.9 W
Working Environment – Temperature| 0 ~ 35 °C
Net Weight| Main unit: app. 185g Adapter: app. 80g
Unit Dimension (W) × (D) × (H)| 140 x 57 x 91mm
Radio Frequency| FM 87.50 – 108.00MHz DAB 174 – 240MHz

How to activate wireless network port:

• Connect the unit with power
• Switch to wireless mode (e.g. Internet)

How to deactivate wireless network port:

• Go to Main menu – System settings – Network – Keep network connected. Select No and then press SELECT button to keep network disconnected

Specification and Warranty

Standby power consumption:

WiFi off: < 1.00 W (standard standby mode)
WiFi on: < 2.00 W (network standby mode)

Power Adapter information

Manufacturer’s name and address:
DONGGUAN DONGNIU ELECTRONIC TECHNOLOGY CO.,LTD
3th floor, NO.8, HengLing Street, HengJiao Industrial Park, ShiJie Town,
Dongguan City, Guangdong,P.R. China

Model Number:| DNS051-0591000-AV
Input Voltage and Frequency:| 100-240V ~ 50-60Hz 0.2A max.
Output Voltage:| DC 5.9V
Output Current:| 1.0A
Output Power:| 5.9W
Average Active Efficiency:| 75.0%
Eifficiency at low load(10%)| N/A%
No-Load Power Consumption:| 0.09W

Note:

• The equipment will enter network standby mode after approx. 15 minutes.
• FM is exceptional, it is inappropriate for the intended use of equipment if the apparatus didn’t receive radio signal on FM mode.
• In Internet radio, Podcasts, Spotify, DAB radio and Bluetooth Audio mode, the unit will automatically go to Standby mode after 15 minutes, if it has no audio playback. Press Standby button to resume.
• The product may have noise (1KHz signal) in the presence of strong electromagnetic eds, in case of malfunction due to these strong electromagnetic eds, user need to wait till resume normal operation without intervene.”
• Features and specications are subject to change without prior notice.

Support

Thank you for purchase of Majority Robinson 2IR.
Please follow the guidance of the manual to set up your device and enjoy its fantastic features.
If you require further assistance with your new device, please contact our support team on the Majority website : https://www.majority.co.uk/support

Warranty

Register your product at www.majority.co.uk within 30 days of purchase to activate your extended warranty.
Terms and conditions applies

Safety Information

• Read all the instructions carefully before using the unit and keep them for future reference.
• Check that the voltage marked on the rating label matches your mains voltage.
• The unit must be placed on a at stable surface and should not be subjected to vibrations.
• Do not place the unit on sloped or unstable surfaces as the unit may fall o or tip over.
• The mains socket must be located near the unit and should be easily accessible.
• Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as radiators or gas/electric res. Avoid exposure to direct sunlight and other sources of heat.
• Never place any type of candle or naked ame on the top of or near the unit.
• To reduce the risk of re, electric shock or product damage, do not expose this unit to rain, moisture, dripping or splashing. No objects lled with liquids, such as vases, should be placed on the unit.
• If you spill any liquid into the unit, it can cause serious damage. Switch it o at the mains immediately. Withdraw the mains plug and consult your dealer.
• To prevent the risk of electric shock or re hazard due to overheating, ensure that curtains and other materials do not obstruct the ventilation vents.
• Do not install or place this unit in a bookcase, built-in cabinet or in another conned space. Ensure that a minimum of 10cm should be kept around the apparatus for ventilation.

Safety

Always disconnect the unit from the mains supply before connecting/disconnecting other devices or moving the unit.
Unplug the unit from the mains socket during a lightning storm.
This unit will become warm when used for a long period of time. This is normal and does not indicate a problem with the unit.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sucient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the manual accompanying the unit.
Mains Adapter

• Make sure the unit is not resting on top of the mains adapter cable, as the weight of the unit may damage the cable and create a safety hazard.
• If the mains adapter is damaged it must be replaced by the manufacturer, its service agent, or similarly qualied persons in order to avoid a hazard.

Interference

• Do not place the unit on or near appliances which may cause electromagnetic interference. If you do, it may adversely aect the operating performance of the unit, and cause a distorted sound.

Supervision

• Children should be supervised to ensure that they do not play with the unit.
• Never let anyone especially children push anything into the holes, slots or any other openings in the case – this could result in a fatal electric shock.

Service/Maintenance

• To reduce the risk of electric shock, do not remove screws. The unit does not contain any user serviceable parts. Please leave all maintenance work to qualied personnel.
• Do not open any xed covers as this may expose dangerous voltages.
• Ensure to unplug the unit from the mains socket before cleaning.
• Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the unit’s surface.
• Do not use liquids to clean the unit.

The symbol indicates DC voltage
The symbol indicates polarity of d.c. power connector
The symbol indicates AC voltage
The symbol indicates class II equipment
For indoor use only
RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

• The mains plug of power adapter is used as the disconnect device, The socket-outlet shall be installed near the equipment and shall be easily accessible.

• CAUTION
  Risk of explosion if battery is replaced by an incorrect type

• Warning

To avoid replacement of a battery with an incorrect type
Don’t disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a Battery.

Don’t leaving a battery in an extremely high temperature surrounding environment
To avoid battery subjected to extremely low air pressure.

Under the environment with radio-frequency disturbance, the product may malfunction and could self-recover when the interference disappear.

Keep these instructions.
Instructions are all available for download at www.majority.co.uk
IMPORTANT: Please read all instructions carefully before use and keep for future reference

EU Declaration of Conformity

I hereby declare that the product:

Product Name: Internet Radio and DAB+ adapter
Model number: Robinson 2IR
Brand: Majority
SKU code: 1000002824

Satises all the technical regulations applicable to the product within the scope of Council Directives 2014/35/EU and 2014/30/EU, 2009/125/EC, 2012/19/EU, 2014/53/EU, 2011 /65/EU, 1907 /2006.

2014/35/EU (LVD Directive)
EN62368-1:2014+A11:2017
2014/30/EU (EMC Directive) EN55032:2015+A11:2020, Class B, EN IEC 61000-3-2: 2019, EN61000-3-3:2013 +A1:2019, EN55035:2017+ A11:2020, EN 301 489-1 V2.2.3 (2019-11), EN 301489- 17 V3.2.4 (2020-09) 2009/125/EC (ERP Directive)
EN50564: 2011, EN62311: 2008 2012/19/EU (WEEE Directive)| 2014/53/EU (RED Directive) EN55032:2015+A11:2020, Class B, EN IEC 61000-3-2: 2019, EN61000-3-3:2013 +A1:2019, EN55035:2017+A11: 2020, EN 301 489-1 V2.2.3 (2019-11), EN 301489-17 V3.2.4 (2020-09), EN 303 345-1 V1.1.1 (2019-06), EN 303 345-3 V1.1.1 (2021-06), EN 303 345-4 V1.1.1 (2021-06), ETSI EN300 328 V2.2.2 (2019-07), EN62368-1:2014+A11: 2017, EN 62479: 2010, EN 50663:2017

2011/65/EU & 2015/863/EU (RoHS Directive)
1907/2006 (REACH Directive)

---|---

All essential test suites have been carried out.
This declaration is issued under the sole responsibility of iZiIla Ltd.
Point of Contact: Eddie Latham I Founder

Signed:

Date: 10.01.2023
UK: iZilla Ltd, Newton House, 2 Pioneer Court, Histon, Cambridge, CB24 9PT, UK

www.majority.co.uk

References

• Spotify - Connect
• Third Party Licenses | Spotify for Developers
• Soundbars, DAB Radio & Internet Radio range | Now in over 3 Million Homes
• Registrieren Sie Ihr Produkt - Majority
• Rückgabe & Garantie - Mehrheit
• Support - Majority
• Registra tu producto - Majority
• Devoluciones y Garantía - Mayoría
• Support - Majority
• Enregistrez votre produit - Majority
• Retours et garantie - Majorité
• Support - Majority
• Registra il tuo prodotto - Majority
• Resi e garanzia - Maggioranza
• Support - Majority
• Support - Majority
• Third Party Licenses | Spotify for Developers

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>