GL iNet GL-A1300 AC1300 Gigabit Wireless Router User Guide
- June 15, 2024
- GL iNet
Table of Contents
GL-A1300 / Slate Plus
AC1300 Gigabit Wireless Router
Let’s get started.
SETTING UP
-
Power On
When powered up, your router will broadcast both 2.4G and 5G Wi-Fi signal with the SSID:
GL-A1300-xxx and GL-A1300-xxx-5G.
-
Connect via Wi-Fi
Connect to the Wi-Fi called GL-A1300-xxx or GL-A1300-xxx-5G, and then input the default Wi-Fi password which is printed on the bottom label of the router.
Connect via LAN
-
Set Up Router
Visit http://192.168.8.1 in your browser to set up your router; start by choosing your preferred language.
SUPPORT
Repair / Reset
If you cannot access the web-based setup page or cannot connect to the router,
you can press the Reset button:
-
Press and hold for 3 seconds and then release to repair your network.
The light will turn blue and flash slowly until your network recovers. -
Press and hold for 10 seconds, and then release to reset the router to factory settings. The light will turn blue and flash rapidly. All data will be cleared when the light becomes solid blue.
https://docs.gl-inet.com/en/4/
Technical Supports
- For more detailed and updated instructions, please visit our website docs.gl-inet.com
- For further questions, you can get help from the following ways:
– Email to support@gl-inet.com
– Message us on our Facebook: facebook.com/gl.inet.wifi/
– Post questions in our forum: forum.gl-inet.com
– Ask professionals in other forums e.g. OpenWrt, LEDE or other professional websites
WARRANTY
- We provide one year limited warranty for routers and 3-month limited warranty for accessories. Extra warranty may apply according to the local law in which the product purchase took place.
- Highly recommend using the included 5V/3A power adapter.
- Any damage to the router caused by not following the instructions will render this warranty null and void.
- Any damage to the router caused by modifying the PCBA, components or case will render this warranty null and void.
- Issues caused by the use of third-party firmware may not get official support from us.
- Any damage to the router caused by inappropriate use, e.g. inappropriate voltage input, high temperature, dropping in the water or on the ground will render this warranty null and void.
- Pictures on the instructions are only for reference. We reserve the right to change or modify these materials without further notice.
FCC ID: 2AFIW-A1300
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. -
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
-
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. This transmitter
must not be co-located or operating in conjunction with any other antenna or
transmitter.
ISED compliance statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
ISED Radiation Exposure statement
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator and your body.
The user manual for LE-LAN devices shall contain instructions related to the
restrictions mentioned in the above sections, namely that:
i. the device for operation in the band 5150–5250 MHz is only for indoor use
to reduce the potential for harmful interference to co-channel mobile
satellite systems;
The functions of Wireless Access Systems including Radio Local Area
Networks(WAS/RLANs) within the band 5150-5350 MHz for this device are
restricted to indoor use only within all European Union countries.
| AT| BE| BG| HR| CY| CZ| DK| EE| Fl| FR| DE| EL| HU| IS| IE| IT|
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
LV| LI| LT| LU| MT| NO| PL| PT| RO| SK| SI| ES| SE| CH| NL| UK(NI)| UK
Hereby, GL TECHNOLOGIES (HONG KONG) LIMITED declares that the radio equipment
type [AC1300 Gigabit Wireless Router, GL-A1300] is in compliance with the
essential requirements and other relevant provisions of Directive
2014/53/EU.The full text of the EU declaration of conformity is available at
the following internet address: https://www.gl-inet.com/products/certificate
Frequency bands: 2412~2472MHz (WIFI 2.4G); 5.15~5.25GHz (WIFI 5G)
5.725~5.875GHz (WIFI 5.8G)
Maximum output power: WIFI 2.4G: 17.73dBm; WIFI 5G:19.40dBm
Use only power supplies listed in the user instructions:
SHENZHEN SHI YING YUAN ELECTRONICS CO LTD | MODEL: ICP20-050-3000D | INPUT:
100-240V-50/60Hz 0.6A | OUTPUT: 5.0V 3.0A 15.0W
Hong Kong Office
GL Technologies (Hong Kong) Limited
Unit 601, Building 5W, Hong Kong Science Park,
Shatin, N.T., Hong Kong
Shenzhen Office
Shenzhen Guanglianzhitong Tech Co., Ltd.
Room 305 – 306, Skyworth Digital Building, Shiyan Street,
Baoan District, Shenzhen, China, 518000
( +86-0755-86606126 )
ver. 20230801
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>