WANNYToN T03A Handheld Garment Steamer Instruction Manual

June 15, 2024
WANNYTON

WANNYToN T03A Handheld Garment Steamer

WANNYToN-T03A-Handheld-Garment-Steamer-PRODUCT

  • Model : T03A

Installation Manual

Read the manual carefully before use and keep it well for future reference.

IMPORTANT SAFETY INSTRUCTIONS

  • The appliance is mainly used to iron clothes. It is designed with a beautiful appearance and is easy to use, economical and safe. It is suitable for steam ironing silk, wool, chemical fiber, cotton and blended fabric. It can quickly remove creases from clothes, without damaging them. It is also equipped with cleaning, anti-scaling and high-temperature sterilization function. In addition, the appliance is easy to maintain and repair.
  • The appliance is not intended to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible for their safety, and they understand the related risks. Children must be supervised to ensure that they do not play with the appliance. Cleaning and maintenance operations must not be carried out by children unless supervised.
  • Keep the appliance and its cord out of the reach of children under 8 years old.
  • Do not let children play with the packaging materials.
  • Do not repair the appliance yourself. Instead, contact a qualified technician. To avoid danger, replace the cord only with an equivalent cord and only by the manufacturer, its technical service or a similarly qualified person.
  • Always disconnect the appliance from the power supply if left unattended or before assembly, disassembly and cleaning.
  • Turn off the appliance and disconnect it from the power supply before replacing accessories or touching parts that may move during operation.
  • The appliance is not designed to be operated via an external timer or a separate remote control system.

Safety and Protection

  • Thermostat : When the tank runs out of water, the thermostat will maintain the temperature within the rated temperature by controlling the electric current.
  • Thermal Fuse Protection : When the thermostat is damaged or fails, the thermal fuse protection device intervenes. When the appliance heats up beyond a certain temperature, the thermal fuse promptly cuts off the power supply to avoid dangers.

Notes

  • Do not operate the appliance unless you read this manual thoroughly.
  • Use the appliance according to the instructions, do not use it for any other purpose.
  • The water used for the appliance must be potable water for domestic use.
  • Before use, make sure that the working voltage of the appliance complies with the power supply voltage.
  • Before using the appliance, connect the power cord well. Do not share the power supply with other high power appliances. Do not use the power strip to avoid overload and fire hazards.
  • Before use, add water without exceeding the maximum level. After the accessories are installed, turn on the power.
  • Do not add detergents or other liquids to the water tank.
  • Keep the fabric brush away from people, animals, household appliances and other equipment during normal operation. When not in use, turn off the power to avoid injury to people or damage to other items.
  • When in operation, do not touch the steam nozzle.
  • Use a soft dry cloth and a neutral detergent to clean the surface of the appliance and do not use solvents such as petrol, alcohol.
  • Do not immerse the appliance, power cord or plug in water or other solutions.
  • Do not place the appliance in harsh environments for a long time, such as moisture, strong sunlight or corrosive gases.
  • Keep the appliance away from flammable or explosive objects.
  • If there is any damage to the appliance, in particular to the body and the power cord, stop using it.
  • The appliance can only be used indoors.
  • Do not fill the tank with hot water. The tank can only hold cold water.
  • Never use the appliance without water in the tank.
  • Do not fill the tank beyond the maximum “MAX” line.
  • When using the appliance, pay attention to the emission of steam.
  • The steam that comes out of the nozzle is very hot. Never direct the steam nozzle towards people, animals or clothing that are being worn to avoid burns.
  • The nozzle becomes extremely hot during use. Do not touch it during and after use, but allow it to cool down.
  • RISK OF BURNS! Always hold the appliance by its handle.
  • First try it on a small area of the garment to make sure the temperature is not too high for the fabric.
  • Always empty the water tank after each use.
  • Let the appliance and the brush cool down completely before cleaning.
  • Do not use abrasive cleaners for cleaning. Use a soft cloth and a mild detergent.

Product Information

  1. Steam Nozzle Plate
  2. Steam Button with indicator light
  3. Water Tank (Handle)

Accessories

WANNYToN-T03A-Handheld-Garment-Steamer- \(2\)

How to Use Handheld Garment Steamer FILL THE WATER TANK

  • Make sure the plug is disconnected from the power supply.
  • Remove the rubber cap from the top of the water tank and fill the tank with water. Pay attention to the Max and Min line marked on the water tank. Do not fill too much or too little. (Pie 1 ).

NOTE: The appliance has been designed for use with untreated tap water. Do not add perfume, starch, descaling fluids or other chemicals to the water tank.

  • It is recommended to mix 50% of tap water and 50% of demineralized water. Increase the percentage of demineralized water if the tap water in your area is very hard.

  • Make sure that the rubber cap has been fixed properly before connecting the water tank to the body of the appliance.

  • Hold the body with one hand and the water tank with the other, align the. on the water tank with a on the body, and place it into the body by pushing
    it upwards. (Pie 2)

  • Rotate the tank counter-clockwise by 50° to align the on the tank with the on the body. (Pie 3)

  • To remove the water tank, do the opposite. (Pie 2)WANNYToN-T03A-Handheld-Garment-Steamer- \(7\)

  • The base is used to hold the appliance. Please use it as Pie 4 shows.

USE OF ACCESSORIES
If you need to use the accessories, hold the steamer by the handle, then attach the fabric brush onto the steam nozzle plate. You will hear an audible click after attaching it correctly (Pie 5 and 6) .

WANNYToN-T03A-Handheld-Garment-Steamer- \(9\)The fabric brush removes creases from garments during steam ironing.

STEAM IRONING OF FABRICS

ATTENTION: Before use, please check the fabric label of the garment.

  • It is safe to use on most fabrics, even delicate fabrics like silk, synthetic fabrics like 100% nylon or other steam sensitive materials. Always check fabric labels and follow the advice provided by the manufacturer. To better protect delicate fabrics, it is recommended not to apply steam ironing directly to the fabric but to place a cloth between the appliance and the garment to be ironed.
  • Hang clothes to be ironed on hangers, but not on your hands.
  • Please empty the pockets before using the appliance to iron the clothes.
  • Do not steam over metal accessories like buttons, zippers, embellishments or prints, only steam iron the surrounding areas.
  • Plug power cord into a standard grounded electrical outlet.
  • The indicator light flashes white during preheating, after about 45 seconds, the indicator light will change to constant light, indicating the appliance is ready to use.
  • Direct Steam Nozzle towards fabric you want to iron. Press the Steam Button to activate continuous steam. (Pie 7)
  • To stop the steam, press the Steam Button again.

Note: When the appliance is in operation, it will produce a relatively loud sound. This is the pumping noise caused by water being pumped for heating, which is a normal phenomenon.
It is normal that a small amount of white particles may come out during the first spray.
Attention: Always make sure that the Steam Nozzle is pointed towards a safe direction (away from people, pets and plants) when steam ironing.
When you finish using the appliance, unplug the power cord immediately. Refer to the guidelines for “Storage and Maintenance”.

Storage and Maintenance

  • Unplug and leave it to cool for at least 30 minutes.
  • Make sure to empty the water tank after use.
  • Wipe the appliance with a cloth and store it in a dry place.
  • Always make sure that the steam outlets are clean, free from obstructions and scale.
  • After long-term use, there might be dirt accumulated on the steam outlets and the plate. Use a clean cloth dipped in water and vinegar (water and vinegar are mixed in a 1 :1 ratio) to clean the dirt.

Troubleshooting

WANNYToN-T03A-Handheld-Garment-Steamer- \(11\)

The Technical Parameters

WANNYToN-T03A-Handheld-Garment-Steamer- \(12\)

  • The appliance complies with the CE marking requirements and was manufactured in accordance with the current safety standards.

Recycling

  • The appliance is marked with a separate collection symbol relating to waste electrical and electronic equipment. This means that the appliance must be taken care of by separate collection systems in accordance with the European Directive 2012/19/EU so that it can be either recycled or dismantled in order to minimize the impacts on the environment.
  • For more information, please contact your local or regional authorities.
  • Do not dispose of electrical appliances with unsorted municipal waste. Use special equipment for the separate collection of electrical appliances. Contact your local city center for information on available separate collection systems.
  • Unsorted electronic appliances are potentially dangerous to the environment and human health due to the presence of hazardous substances.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

WANNYTON User Manuals

Related Manuals