WANNYTON P58 Mini Mall Fridge Instruction Manual
- June 15, 2024
- WANNYTON
Table of Contents
WANNYTON P58 Mini Mall Fridge
DC INVERTER COMPRESSOR REFRIGERATOR
OUTSTANDING COOLING PERFORMANCE DOWN TO -20°C
Dual-use for vehicles and home
The appliance is not only applied for self-driving trips or motels, but also
can be used in residential environments such as hotels, apartments.
Attention
Before using the appliance, please read this manual carefully and keep it
properly for future use.
- Clean the inside and outside of the appliance with a damp cloth prior to the first use.
- Neither fill with corrosive liquids nor pour liquids directly into the appliance.
- Disconnect the appliance from the power supply and store it in a dry place when not in use for a long time.
- Clean the compartment regularly to prevent odour and bacteria to ensure food safety.
- Switch off the appliance or remove the batteries (if any) before attempting to move by the handle.
Connect to the power supply
- Connect the DC plug to the power outlet of the appliance.
- Place the appliance securely in the car.
- Connect to the cigarette lighter socket.
- Press “ON/OFF” to turn it on.
- The appliance can be connected to more than one type of power supply.
- The appliance can be directly connected to the 12V/24V DC power supply.
- The appliance can be used at home (household voltage 100-240V) with a 100- 240V AC adaptor.
Operation of the Appliance
Car battery voltage protection
The built-in ECO electronic control module can automatically monitor car battery voltage. The appliance will be automatically cut off when the battery has been excessively consumed to protect the battery from low voltage which may cause car ignition failure.
Appliance Components
- Lid Lock
- Lid
- Rubber Seal
- Wheels
- Telescopic Handle
- Power Socket
- Control Panel
- Inner Compartment
Operation Instructions
Turn On/Standby
After connecting to the power, press and the appliance enters the on/standby state.
Temperature Setting
- Press (+) or – to adjust the temperature.
- Press and hold (+) or – and the value can be adjusted by 2°C successively.
- If no operations are detected, the set temperature will be saved after flashing for 3s and it reads the current temperature.
- The default temperature for initial startup is 0°C/32°F Celsius (°C)/Fahrenheit {°F) Conversion
- Press (+) and – simultaneously for 3 seconds to choose to show the temperature in Celsius (°C)/Fahrenheit (°F).
MAX/ECO Mode Conversion
- Directly press to select MAX mode or ECO mode.
- MAX mode: Green light; ECO mode: White light
- MAX: Maximum power; ECO: Energy saving
Battery Protection Setting (The default voltage is H1)
- Battery Protection Levels: H1 (High)->L3 (Low)->N2 (Medium)
- Press for 3s to enter the battery protection setting. Press it again to switch H1->L3->N2 levels in turns.
- If no operations are detected, the set level will be saved after flashing for 3s and it reads the current setting.
Power-off Memory Function
This function ensures that all settings will remain unchanged after switching
the appliance off and on again.
Use of the Telescopic Handle
Press the Unlock button to pull out or retract the handle.
Troubles and Troubleshooting
Note : If there is any abnormal situation that cannot be solved by troubleshooting, please contact our customer service for assistance.
Not Working
- Check if the appliance is well-connected.
- Check if it is “On” on the control panel.
- Check if there is sufficient ventilation.
- Check if the fuse has blown.
Poor Cooling Performance
- Check if the lid is closed properly.
- Check if the door seal is damaged or deformed.
- Check if there is sufficient ventilation around the appliance.
- Check if the temperature is set appropriately.
Abnormal Noise
- Check if the appliance is put on a flat and horizontal surface.
- Check if there are vibrations from surrounding objects.
- Check if any part in the appliance get loose or fall off.
Condensation
It is normal that there will be some condensation on the surface of the
appliance when the air humidity is higher than 75%.
Error Codes
-
E1: Low input voltage
-
The appliance’s power cord was connected to the cigarette lighter socket before starting the car.
CD Wait some time before connecting the cord after starting the car. -
The input voltage of the adapter is too low.
CD Adjust the battery protection level to medium or low. ® If it does not work, replace the adapter. -
E2: Fan failure
Replace the fan. -
E3: Input voltage failure due to frequent compressor start
-
When the appliance is used in a car.
CD Turn off the appliance and turn it back on after 5 minutes. ® If it doesn’t work, refer to “E1”. -
When the appliance is connected to the adapter.
CD Adjust the battery protection level to medium or low. ® If it does not work, replace the adapter. -
E4: Low compressor rotation speed
Adjust the input voltage and turn it back on. -
E5: Control chip overheating
Switch off and check after 5 minutes if overheating is caused by poor ventilation around the compressor
Safety Warnings
- Ensure that the appliance is always operated with the correct voltage as indicated on the label.
- Do not pour liquids directly into the appliance.
- Do not modify the appliance, since it could cause serious danger.
- Do not expose the appliance to rain.
Electrical Schematic
Applications
- With an additional battery, you can hold the set temperature in any situation without worries.
- For storing ice cream, set the temperature lower and keep it constant.
- Prevent health hazards from spoiled bottled beverages caused by high temperature.
- Keep frozen food and seafood fresh during the long trip.
- The freshness of tea leaves can be effectively preserved so that you can enjoy fresh tea at any time during car journeys.
- The ideal temperature to store red wine ranges between 10° C and 18° C. The accurate temperature control of the car refrigerator guarantees the best storage temperature for it.
- It is difficult to keep fresh fruit in the car for more than 2 hours, even with the air conditioner on. The car fridge can effectively keep fruit fresh for a long time.
- The coating of sunglasses could be ruined by high temperatures, and the car fridge is the ideal solution.
- Cosmetics could be ruined by high temperatures. The best choice is to store them in the portable refrigerator.
Disposal
To protect the environment and human health, the waste electrical and
electronic equipment should not be disposed of together with household waste.
Instead, it must be taken to a designated collection point for recycling of
your waste electrical and electronic equipment. For more information about the
recycling and disposal of this appliance, please contact your local authority
or your household waste disposal service.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>