BOYO VTB301CA CVBS Heavy Duty Universal Mount Backup Camera Installation Guide
- June 15, 2024
- BOYO
Table of Contents
VTB301CA QUICK INSTALLATION GUIDE
Quick Installation Guide
System Overview
One VTB301 CA high resolution CVBS / AHD color camera with the following features:
- IP69K Waterproof Rating
- Mirror/Non-Mirror image, switched by loop wire
- Distance line on/off, switched by loop wire
- CVBS/AHD signal, switched by loop wire
- 720P/1080P resolution, switched by loop wire
- 170° (D) Wide view angle
- 360-degree adjustable mounting angle
- Auto-iris lens that automatically adjusts to light conditions
- Infrared light for improved image quality in low-light situations
- Night vision distance of approx. 26 ft
■ 65 ft Extension Cable Included
■ Supplied installation accessories
Content List
Installation
Install the VTB301 CA as follows:
a. Install the VTB301 CA camera in the desired location, as follows:
- Fasten the camera mounting bracket, using the 2 self tapping Philips screws, to the desired mounting surface, as shown in the Step 1 arrows of Figure 1.
- Position the camera in the camera mounting bracket.
Adjust the camera to the proper angle, and then attach the camera and sun visor to the camera mounting bracket using the 2 supplied self-tapping Philips screws, as shown in the Step 2 and Step 3 arrows of Figure 1.
Figure 1
. Installing the Camera
b. Route the extension cable from the camera location to the location of the output device (not supplied), such as a monitor or switcher.
c. Insert the male connector of the extension cable into the appropriate female audio/video port of the output device (not supplied), such as a monitor or switcher.
CAUTION: To reduce the risk of electrical shock, disconnect the battery from the electrical system of the vehicle before starting the installation.
Reverse/ Normal Image {Selectable)
The camera default setting is in reverse viewing. To change to non-mirror viewing, cut the ORANGE wire and re-power the camera for the changes to take effect.
Parking lines On / Off {Selectable)
The camera default setting is grid line OFF. To turn on the grid lines, cut the GREEN wire and re-power the camera for the changes to take effect.
AHD / CVBS {Selectable)
The camera default setting is in CVBS signal. To connect and change to AHD siginal, cut the PURPLE wire and re-power the camera for the changes to take effect.
1080P / 720P {Selectable)
The camera default setting is 720P resolution when AHD siginal is activated.
To change to 1080P resolution, cut the BROWN wire and re-power the camera for
the changes to take effect. 
Specifications
| Item | Specification |
|---|---|
| Image Sensor | ■ AHD – 1/2.9 inch |
■ CVBS – 1/4 inch
TV System| NTSC
Effective Pixels| ■ AHD – 1920 (H) x 1080 (V)
■ CVBS – 640 (H) *480 (V)
Minimum Illumination| 0.0 Lux
Power Supply Range| 8-35VDC
Operating Temperature| -20°C to 70°C
Dimensions
(Width X Height X Depth)| 3 inches x 3 inches x 2.25 inches
Horizontal Angle| ■ 1080P: 125 degrees
■ 720P: 125 degrees
■ CVBS: 80 degrees
Diagonal Angle| ■ 1080P: 170 degrees
■ 720P: 170 degrees
■ CVBS: 100 degrees
Suppied Accessories| ■ Manual
■ Screws
■ 20M Extension cable
■ DC Power cable
■ Warranty card
■ Registration card
CAUTION: Before inserting screws into the mounting surface, ensure that the underside of the mounting surface is clear of equipment that might be damaged by the screws.
Cameras/Monitors/DVRs/Dash-Cams/Receivers
1 YEAR LIMITED WARRANTY
This limited warranty is given to the end-user or the retail purchaser
(referred to this warranty as “Original Purchaser”) that it will be free from
defects in mate rial and workmanship for a period of one year from the date of
the purchase of the new product (excluding accessory items such as power
cords, cradle, memory card, adaptor and cables) . A copy of the original proof
of purchase and this warranty card with RMA number given by Vision Tech
America, Inc . is required to receive warranty service. In the unlikely event
that the new product should fail due to defect in material or workmanship ,
Vision Tech America, Inc . will repair or replace with new or refurbished
product, where each party will be responsible for one-way shipping for the
lower 48 states customers only . For International and U.S custom ers
residing in Hawaii , Alaska and Puerto Rico, customer is responsible for
freight charges incurred both ways.
This limited warranty does not cover any physical damage to this product,
damage caused by improper installation; improper use; misuse; neglect; repair
of cracked, scratched, broken or modified cosmetics; or parts that have been
altered or removed; damages done by another device used with this product
resulting from use of non BOYO®- brand parts. This warranty is VOID if you
purchased this product as used, floor model sample, or refurbished ; i f the
product has been altered or modi fied in any way (including but not limited to
attempted repair without authoriza tion from BOYO~- Vision Tech America, Inc .
and/or alteration/removal of the serial number). This limited warranty does
not cover the vehicle of any damages or liabilities in which this product is
installed or being installed. This product does not guarantee avoidance of
vehicle collision or accident . If you are having trouble with the product,
please contact our technical support at 888 -941-300S or email:
info@visiontechamerica .com with your questions or comments .
If your product is eligible to receive warranty, request for warranty service
online by visiting http://visiontechamerica.com/site/get-warranty/
This warranty is invalid if the factory applied serial number has been altered
or removed from the Product .
IMPORTANT : TO SEND DEFECTIVE PRODUCT FOR WARRANTY SERVICE, YOU MUST
RECEIVE RMA (RETURN MATERIAL AUTHORIZATION) AND INCLUDE ORIGINAL PROOF OF
PURCHASE AND THIS WARRANTY CARD WITH THE SHIPMENT .
VISION TECH AMERICA CUSTOMER SERVICE CENTER
888-941 -300S or visit
www.visiontechamerica.com
For an accessory or part not available from your authorized dealer, call
For U.S. 888-941-300S I International 714-446-&543
Product Registration
Vision Tech America, Inc.
Name………………………………………………………
Company ………………………………………………………
Address ………………………………………………………
City ………………………………………………………
State ………………………………………………………
Zip_………………………………………………………
Phone ………………………………………………………
Email:………………………………………………………
Model No……………………………………………………….
Serial No……………………………………………………….
Purchased Date …………………………………………….
Store Name ………………………………………………………
City/State of Store ……………………………………………….
Place Postage Stamp
Vision Tech America, Inc.
1452 E. Valencia Drive
Fullerton, CA 92831
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>