JENSEN CAR723W Digital Multimedia Receiver User Guide

June 15, 2024
Jensen

JENSEN logo CAR723W
QUICK START GUIDE
Media Receiver with Android Auto™ and CarPlay™
featuring a T digital TFT DisplayJENSEN CAR723W Digital Multimedia
Receiver

Wiring Diagram – Inputs/Outputs

Note: Works for Apple CarPlay and Android Auto only. JENSEN CAR723W
Digital Multimedia Receiver - Wiring DiagramNote:
When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause damage. The unit uses (1) 15 amp ATC mini style fuse located on the power connector.

Installation

Before You Start

  • Disconnect negative battery terminal. Consult a qualified technician for instructions.
  • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

INSTALLATION GUIDEJENSEN CAR723W Digital Multimedia Receiver -
INSTALLATION GUIDE

Control Locations

The radio display features the following functions and displays,

  1. Power
  2. Mute
  3.  Volume Up/Down Push Voice Activation©
  4. Reset

JENSEN CAR723W Digital Multimedia Receiver - Control
Locations

Main Menu

In main menu, press the desired icon to enter the corresponding mode: AM/FM/Bluetooth Phone/ Bluetooth Audio/Apple CarPlay/Android Auto/USB/ Camera/Ea /AV In/Settings JENSEN CAR723W Digital Multimedia Receiver - Main
Menu

Tuner Operation

JENSEN CAR723W Digital Multimedia Receiver - Tuner
Operation

  1. Main Menu
  2. Dimmer
  3. Local/Distance
  4. Seek Tune Up
  5. Seek Tune Down
  6. Preset Stations
  7. EQ
  8. Settings

USB Operation

From the main menu. touch the USB icon on the main screen. JENSEN CAR723W
Digital Multimedia Receiver -USB OperationAudio Operation
Select from the below 3 icons in the Settings menu to select between Balance, Fader and Time Alignment Settings, EQ Presets and 10-Band EQ Settings or Surround Settings.JENSEN CAR723W Digital Multimedia Receiver - Audio
Operation Screen Operation
Press the Monitor icon in the Settings menu to access the Brightness, Contrast, Button Illumination Colors and Wallpaper Settings. JENSEN CAR723W
Digital Multimedia Receiver - Screen Operation

General Operation
Press the Function icon in the Settings menu to access the Time Zone, Date and Time and other radio Settings. JENSEN CAR723W Digital Multimedia Receiver -
radio Settings.Wired & Wireless CarPlay Operation
Wired connection

  1. Connect an Apple CarPlay compatible device to this unit via USB.
  2. Press the Apple CarPlay icon.
    The Apple CarPlay home screen appears.

Wireless connection
Before using Apple CarPlay wirelessly. turn on the Bluetooth/Wifi function on the Phone.

  1. Press icon on the main menu;
  2. Press “  ” to confirm to use wireless CarPlay;
  3. Press “ “icon to search phone device. The available devices appear on the list;
  4. Find the desired device on the screen and press “Pair”;
  5. A pass key will be displayed on the screen:
  6. The same key appears on the iPhone. press “Pair” and then press “Allow” for the popups:
  7. Press” ✓ ” on the screen to confirm to connect:
  8.  Press “Use CarPlay” on the iPhone. The unit configures the connection then starts the application.

Wired & Wireless Android AutoTM Operation
Wired connection

  1. Connect an Android Auto™ compatible device to this unit via USB.
  2.  Press the Android Auto icon.
    The Android Auto home screen appears.

Wireless connection
Before using Android Auto wirelessly, turn on the Bluetooth/Wifi function on the Android device.

  1. Press   icon on the main menu:
  2. Press” ” to confirm to use wireless Android Auto: Jensen Settings Calendar YT Music CE
  3. Press ” “icon to search phone device. The available devices appear on the list;
  4. Find the desired device on the screen and press “Pair”;
  5. A pass key will be displayed on the screen:
  6. The same key appears on the Android device, press “Pair” and then press “Allow” for the popups:
  7. Press”.. .. on the screen to confirm to connect:

The unit configures the connection then starts the application.

Bluetooth Operation

Before using Bluetooth
Before you can use a Bluetooth device to make hands-free calls or stream audio. it must be authenti­cated. This is also referred to as “pairing” a device.
Pairing a New Device
The unit broadcasts the pairing signal constantly when no devices are currently connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner’s manual for your device for more details. The device name is” CAR723W”. The unit can be in any mode of operation when pairing is per formed. On certain phones. pairing may need to be done more than once.
Connect
The head unit will automatically connect to the last connected device when the connect feature is set to Auto connect On.
If the connect feature is set to Auto Connect Off. the head unit will not automatically connect to any device.
Bluetooth Phone
From the main menu. touch the Bluetooth on the screen. Bluetooth icon will appear anytime a Bluetooth device is con­ nected.
Dialing a Number
Press   to display keypad and dial a number.
Making and Ending a Call
Press · ** to connect a call. and press to end a call.
Transferring Audio
Press   to transfer audio between the head unit and mobile phone.
Streaming Audio**
Press ► to play or pause the music.
Press   to skip to the previous track.
Press to advance to the next track. JENSEN CAR723W Digital Multimedia
Receiver - Bluetooth Operation

Rear Camera

Limited Three Year* Warranty

This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Jensen warrants this product to the original purchaser to be free from defects in material and workmanship for a period of three years from the date of the original purchase. Jensen agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed, or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period.
What is covered? This warranty covers all defects in the material and workmanship in this product. The following are not covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unautho­rized repair, or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.jensenmobile.com.
Warranty Coverage

  • Limited 3-year warranty. (Proof of purchase required) Jensen recommends professional installation of any electronics in your vehicle to ensure the best performance.
    What to do?

    1. Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.
    2.  If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.
    3.  Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.
    4.  For more information and for the location of the nearest authorized service center please contact us by one of the following methods:
      • Call us toll-free at 888-921-4088 (Monday-Friday, 9:00 am, to 5:00 pm, EST)
      • E- mail us at cs@jensenmobile.com

Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representa­tive is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental, or consequential damages.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference. and
  2.  this device must accept any interference received. including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and. if not installed and used in accordance with the instructions. may cause harmful interference to radio communications.
However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Register your warranty

https://jensenmobile.com/register.htm

Scan to register, or visit:
https://iensenmobile.com/register.html
Upon registration you may also choose to be notified of product updates or special promotions.
Visit www.jensenmobile.com for detailed owner’s manuals on most products.
If you need any assistance, please contact customer service at cs@iensenmobile.com or call 1-888-921-4088 M-F 9 am -5 pm ET Thank you for your purchase!

JENSEN
www.JensenMobile.com
Follow us to keep up to date with new products and information!
Facebook
@Jensen Audio
Instagram
@Jensen Audio
Twitter
@Jensen.Audio
www.jensenmobile.com
© 2023 Namsung America Inc. All rights reserved.
NSC0723-V01
This Quick Start Guide gives you the basics to start using your CAR723W. Please visit https://www.jensenmobile.com to download a complete owner’s manual or call customer
service at 1-888-921-4088 (Monday- Friday, 9AM-5PM EST).
Designed and Engineered in USA

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals