Tuliyet Exclusive 3 Channels Camera User Manual
- June 15, 2024
- Tuliyet
Table of Contents
Tuliyet Exclusive 3 Channels Camera
Please download WIFI products (No download required for non-WIFI) Press and hold the key to open the hot spot of the machine
Product Specification
- DDR: Built-in
- FLASH: 8M SPI norflash
- Display Screen: 2.0 inch IPS HD screen
- LCD resolution: 800×480 pixels
- MINI USB: 5V/2A power adapter port
- External port: Max support 128G Class 10 TF card
- Speaker: Monophonic 15*10mm speaker
- MIC: 4015 Standard Omnidirectional Microphone
Features
- Front camera: 6-glass/F2.0 aperture/170° wide angle
- Inside camera (optional): VGA 120°
- GPS tracker: NO
- AV OUT: NO
- Rear camera: 6M cable/2.5mm port
- Photo: Support
- The lens rotates: Adjust manually
- WDR: Support
- HDR: Support
- Reversing visual: Support
- Video format: AVI
- Image format: JPG
- Compression format: H.264
- Battery: 320mAh polymer lithium battery
- Language: Support multi-language
- G-sensor: support
- Motion Detection: Support
- Delay shutdown: Support
- Loop recording: Support, Do not leak seconds
- Sound record: Support
- Fill light for night vision: Support (Open manually)
- Parking monitoring: Support
- Front camera: Max 1680×960 (30f/s)
- In-car camera resolution: HD640x480 (25f/s)
- Camera resolution: Max support 3M
Working Environment
- Operating temperature: -40°C ~ 70°C
- Operating humidity: 15-65%RH
- Storage temperature: -40°C ~ 70°C
Key Features
(picture for reference only, mainly in kind)
- Menu / Camera / Playback
- Power button
- Down
- Confirm button
- Up
- Front Camera
- Microphone
- Reset button
- Holder interface
- Rear camera interface
- Power interface
- TF Card slot
- Display screen
- Inside camera (optional)
- Turn night vision on / off
Power button : Short press to turn on/off screen, long press to switch on/off the device.
Menu/camera/playback button : Press [OK] to stop recording, press [M] to enter photo mode, and press [OK] to take a photo; in camera mode, press [M] to enter playback mode, press [OK] for playback. Lock function: In case of video recording, short press [M] to enter video menu settings as follows.
- Resolution: 1080P FHD/720P/VGA
- Loop recording: Off/1 minute/2 minutes/3 minutes
- High dynamic range HDR: on/off
- Exposure compensation: -3, -2, -1, 0, 1, 2, 3
- Motion detection: on/off
- Sound record: on/off
- Timestamp: on/off
- Car number: on/off
- G-sensor: High/Medium/Low sensitivity
- Parking monitor: on/off
- Automatic time: Off/3 minutes/5 minutes
- Keypad tone: on/off
- OSD language: Support multilingual
- Light source: 50Hz/60Hz
- Screen saver: Off/30 seconds/1 minute/2 minutes
- Default setting: Confirm/cancel
- Version: Machine software version number
In photo mode, long press (M) to enter the photo menu settings as follows:
- Shooting method: Single shooting/2 seconds timer/5 seconds timer/10 seconds timer
- Resolution: 1M/2M/3M
- Continuous shooting: on/off
- Picture quality: High quality/standard/economy
- Acutance: Strong/standard/soft
- White balance: Automatic/sunlight/cloudy/tungsten lamp/fluorescent lamp
- ISO: Automatic/100/200/400
- Exposure compensation: -3, -2, -1, 0, 1, 2, 3
- Timestamp: Off/Date
- Down key, short press to select the function at the shooting interface.
- Up key, short press to select the function at the Menu interface.
- Confirm button, short press to confirm in the menu interface, short press to video record on/off in the video mode.
Rearview lens (optional)
- In case of video recording, 4 pin plug of the rearview lens is inserted into the AV-in hole of the device, there’s a rear view image in the top-right of the screen, which means connected successfully; short press the OK button to pause, long press the left button to switch front-rear view image, when hanging up “R” gear, it will show the full image of the rear view.
Note : This device can only support dual cameras to video record at the same time instead of 3 channels camera, that is front-inside camera or front- rear camera; if a rearview camera chooses the front-inside view mode, it will automatically indicate the full image of the car reversing visual when you hang up “R” gear.
- When the camera switches from front-inside view to rear view while reversing, it will show the full image of the rear but won’t affect the front-inside video recording. If you want to support three three-channel cameras to video record at the same time, also for system switch and hang-up “R” gear, but won’t affect front-inside video record, will automatically switch back to front-inside view after canceling “R” gear.
- Reset key [RESET]: If the recorder crashes and accidental operation is not a normal fault, press [RESET] to shut down the device, then press [OK] to reboot the device.
Installation Notes
- Test the rearview camera first; if it works well, then install it (a package without a rearview lens can be ignored).
- Turn off the car engine.
- The TF card can insert the recorder slot. Use the high-speed TF card (Class 10 above), a capacity of not less than 4GB, TF card has maximum support of 128GB.
- Insert the car charger into the cigarette lighter.
- When wiring, extend the charging line along the edge of the car door frame and carpet under the car laying.
- Install the rear camera at the rear of the vehicle, pay attention to the up and down direction. Wiring can be buried along the edge of the car roof laying.
Note : There are two ways to install the rear camera:
- A. Adsorbed on the glass above and behind the car, hands-on self-installation (Reversing visual function can not be achieved, only real-time recording rear video).
- B. To find a professional installation staff, install in the license plate above the camera at the same time need to connect the power reversing lights (Reversing visual function can be achieved).
- Adjust the lens position to ensure the best viewing angle.
- Start the engine and check that the machine is operating properly.
features
-
Use the automatic recording function:
Start the car engine, the recorder automatically starts to open the recording function. Close the car engine, the recorder automatically saves the contents of the log and shuts down. Recorded video segments are stored on the TF card. -
Use motion detection:
In standby mode, enter the menu screen and open the motion detection mode. -
G-sensor:
The built-in gravity sensor (G-sensor), if serious vehicle collision, the recorder will lock the first 5 seconds and 10 seconds after the image date when the accident occurred while the bottom left of the display screen displays a lock icon; locked images will be saved as a special file, the file will not be overwritten cycle. -
The device has a key lock feature that will need to retain an image without being locked loop overwritten. In the video mode, short press [M] key logger will then lock the entire video image.
-
In shooting mode, press the [M] key to enter the menu setting, find the date/time menu, short press the [OK] button to confirm and return to the setup menu settings, and press the [M] key to exit the menu setting.
-
File playback:
In the playback mode, press the {OK} key to playback. To exit playback mode, press the MODE button again. -
Reversing visual function:
Connect the DVR with the car charger, and the rear-view camera connects the reversing lights. Insert the car charger, machine will automatically start recording status, The screen switch R position in the recording mode automatically switches to the rear-view camera, and displays a reverse image. After reversing visual machine automatically returns to video mode.
TROUBLESHOOTING FAQ’S
The machine appears “file error” message
- Settings menu -> Restore factory settings and format the memory card, the general problem is the TF card
The screen appears with horizontal stripe interference
- Please select the correct power supply frequency 50Hz(PAL)
How to properly turn on the 24-hour parking monitoring function
- While in normal driving, please do not open it, it easily leads to automatic shutdown or crash, after parking is required to open, configure the buck line or mobile power please
The night shooting screen is not clear enough
- Recorder shooting depends on the outside strong light source (such as streetlights or car lights)
The machine always reverts to the default date and time
- Shutdown in the first case full of electricity, you can use a car charger or mobile power supply to add power
What is the reason for video file leak seconds
- (Turn off motion detection/Turn on the loop recording function) With a certain choice of their own genuine card C10 high-speed card
Why during recording, did the machine automatically shut down suddenly
- Please turn off the parking monitoring function first/Ambient temperature exceeding 70 °C will cause an automatic shutdown
[Note] Practice proof
- Most of the problems sources from the memory card, a small part caused of the power cord
Connecting to WiFi and Reset Instructions
Install the APP and connect to WiFi:
- Press OK at the bottom of the recorder to stop recording.
- Long press the M key to display the menu.
- Tap the M button to change to the menu, select Wifi Control in the menu, and turn it on.
- In the cell phone settings page, connect the car recorder’s wifi – ACTION CAM60def40f5fb0. WiFi Password: 12345678
- After a successful connection, open the APP to use it.
FREQUENTLY ASKED QUESTIONS
What is the brand of the 3-channel dash cam?
The brand is Tuliyet.
How many channels does the dash cam have, and what does it record?
The dash cam has 3 channels and can record video simultaneously from the front, rear, and interior of the vehicle.
What is the maximum video resolution for the front camera?
The front camera can record video up to FHD 2K resolution.
What is the purpose of recording simultaneously from front, rear, and interior cameras?
It helps maximize road coverage and provides evidence in unexpected situations like collisions.
What are the video resolutions for the rear and interior cameras?
The rear camera records up to 1080p, and the interior camera resolution is not specified.
How wide is the angle of view for the front and rear cameras?
The front camera has a wide angle of 170 degrees, and the rear camera has a wide angle of 110 degrees.
Is there a Wi-Fi feature for this dash cam?
Yes, the dash cam has Wi-Fi connectivity and supports app control.
Which app is used to control the dash cam, and on which devices is it available?
The app allows you to view, playback, manage the dash cam, download and edit videos, and share them on social media.
What is the loop recording feature, and how does it work?
The loop recording feature automatically overwrites past unlocked videos to ensure continuous recording.
What is the Incident Lock feature, and how does it work?
In the event of a collision, the built-in G-Sensor locks and retains the video, preventing it from being overwritten.
Is there a MicroSD card included with the dash cam?
Yes, the dash cam comes with a free 64GB MicroSD card.
What is the orientation of the Tuliyet Exclusive 3 Channels Camera?
The orientation is on the passengers' side.
What type of vehicle is this dash cam suitable for?
The dash cam is suitable for cars.
What connectivity technology does the dash cam use?
The dash cam uses Wi-Fi connectivity technology.
DOWNLOAD THE PDF LINK:Tuliyet Exclusive 3 Channels Camera User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>