Tuliyet C13-Q3yPttL Dash Cam Front and Rear Instructions

Tuliyet C13-Q3yPttL Dash Cam Front and Rear Instructions

This manual covers the use of GPS and WIFI functions. If the product you purchased does not have the above functions, please ignore it. If you have any questions during use, you can contact us at any time, thank you for your support.

Important Notice

1. This product is intended for use in motor vehicle only. Do not install the camera where it might block the driver’s view of road (including the mirrors) or the deployment of the air bags.

2. Before using this camera, please insert the memory card first, and format the memory card in camera menu first.

3. This camera records video at high resolution, Be sure to use high speed Micro SD card, Class 10 or above, 16GB or 64GB cards are recommended.
   Please note that SD card was inserted in advance in the SD card slot of the car recorder.

4. This camera features Built-in battery as internal power, it’s used only for saving the video file after external power supply cuts off (car turns off). This camera will not turn on without external power supply.

5. Be sure the camera lens is clean and there is nothing blocking the lens.

6. Do not leave the camera in direct sunlight for a long period of time or where the temperature could go above 170’F(75’C).

Interface and Button Function

1. Mini USB power port
   CD Used to connect an external power supply to charge the battery or provide working power.
   ® Used to connect PC to transfer data.

2. Bracket hole
   Connect with the suction cup through the bracket hole.

3. HDMI Terminal
   Use the provided rear camera cable to connect the front camera with the rear camera through this HD output port.

4. Power Button
   Long Press: when power is on power off, Short press: (when power is on) screen off/on.

5. Lock Button
   Press this button during video recording, the current video file is saved as undeletable, ensuring video evidence is captured and safely prevented from being overwritten.

6. Mode Button
   Press this button to switch between video/photo/playback mode.

7. OK Button
   CD Confirm Setting:
   Decide each setting on the menu screen.
   ® Start/Stop Recording:
   Press during recording to stop/start recording.
   @ Take Picture:
   Press OK button in shooting mode to take a picture.
   @ Video Playback:
   Press OK button in Playback mode to play video.

8. Microphone
   Record ambient sound.

9. Reset Hole
   Reset the machine’s settings.

10. LCD Screen
    The image can be displayed on the LCD screen.

11. Down Button
    CD In setting menu, short press to select the setting options and adjust value.
    ® In video recording mode, short press to tum on/off audio recording.

12. M Button (menu button)
    CD In standby, short press to access setting menu under all mode.
    ® In setting menu, short press to switch between mode setting and system general setting.

13. Up Button
    CD In setting menu, short press to select the setting options and adjust value.
    ® In video recording mode, short press to switch preview mode of the front camera and rear camera.

14. Micro SD Card Slot
    Insert the micro SD caret

15. Camera Lens

16. Speaker

17. Red Lamp
    Red lamp on: The unit is in operation.
    Red lamp off: The unit is turned off.

18. Blue Lamp
    Blue lamp blinking: “Recording in progress” state.

■ About the Reset Button

• If the camera stops working or malfunctions, press the reset button on the underside of the front camera unit to restart the system.
• Pressing the reset button does not erase the data recorded on the SD card.

Three Operating Modes

This dash cam operates in 3 modes: Video Recording Mode, Photo Mode and Playback Mode. These modes also have menus to help
you configure recording and taking photos. Press Mode Button to access the mode you want. Watch the icon on top left comer of the
screen for each mode.

A. Video Recording Mode:

The camera will automatically enter Video Recording Mode and start recording when connected to a car charger and power on. A Red dot flashing on the top left corner indicates recording is in progress. Press the “OK” button to stop recording for the standby mode, or start recording again. (Standby mode means that there is no on going operations.)

1) Interface of Video Recording Mode:

2) Menu of Video Recording Mode:

❖ Setup Steps
In standby mode, press the “MENU” button to enter the setting menu of video recording mode, press the “MENU” button twice to
enter the system setting menu.

❖ Configuration Wizard
► Resolution:
Adjust the recording video resolution to the highest 1600P.
► Dual Camera:
When off, only the front camera will record video. ‘Front and rear can be displayed on the LCD screen even if ii is turned off.
► Cyclic Record:
Sets the recording lime for each file recorded in continuous recording (loop recording). This function allows you to set video file length to 1/3/5 minutes.
► Interval Record:
Set the recording interval between two videos(100ms to 500ms)
► High Dynamic Range:
Turn ON/OFF Wide-Dynamic Range. WDR/HDR function (This function combines multiple photos with different exposure levels into a single shot, allowing you to take effective shots even in dark locations.)
► Exposure compensation:
Adjustable exposure value, used to change the video brightness. The setting range is +3/+2/+1/0/-1/-2/-3.
► Motion Detection:
This function allows the camera to start recording when it detects movement.
► Recording:
Turn ON / OFF audio recording in video.
► Date Stamp:
Enable/Disable the date and time marks in video files.
► Gravity Setting:
G-sensor will detect significant or sudden shock and movement then automatically locks current recording from loop recording,
OFF/Low/Medium/High sensitivity available.
► Parking Guard:
Switching the parking monitor function on and off.

B. Photo Taking Mode This dash cam can operate in Photo Taking Mode, and take HD photo up
12 Mega pixels.

To Take a Photo:
Simply power on the dash cam, press Mode to select Photo Mode, and press OK to take a photo.
Like the video recording mode, you can press the Menu once to access the setting menu for photo mode.
Press menu twice to display System Setting Menu.

1) Interface of Photo Taking Mode

2) Menu of Photo Taking Mode
❖ Setup Steps
In standby mode, press the “MENU” button to enter the setting menu of photo mode, press the “MENU” button twice to enter the system setting menu.

❖ Configuration Wizard
► Capture Mode:
Set the single shot or delay for 2s-1 Os to capture live images,
► Resolution:
Set photo resolution up to 12MP 4032*3024.
► Continuous Shooting:
Turn ON/ OFF continuous shooting.
► Quality:
Defines the quality of image you capture, Fine /Normal /Economy.
► Sharpness:
Defines the clarity of details in the photos, Optional: Strong/
Normal /Soft.
► White Balance:
Establishes the condition to capture an image based on the option given. Optional: Auto /Daylight /Cloudy /Tungsten /Fluorescent.
► Color:
Set the color mode of the picture, Optional: Normal /Black and White /Sepia.
► 150:
Adjust picture brightness. The setting range is Auto /100 /200 /400.
► Exposure:
Adjust exposure value to adjust the brightness of the photo. The setting range is +3/+2/+1/0/-1/-2/-3.
► Anti-Shaking:
Turn ON/ OFF.
► Quick Review:
Sets time duration the photo displays on screen after it has been captured.
► Date Stamp:
Enable/Disable the date and time marks on photo.

C. Playback Mode:
This mode allows you to playback recording video or view photos.
1.Stop video recording. and press Mode button twice to
enter Playback Mode.
2.Use .a& and ‘!!’ to scroll through the recorded files/ photos. and press OK to view recorded video.

1) Interface and Menu of Playback Mode

2) Menu of Playback Mode:

❖ Setup Steps
In standby mode, press the “MENU” button to enter the setting menu of playback mode, press the “MENU” button twice to enter the system setting menu.

❖ Configuration Wizard
► Delete Videos:
CD In playback mode. Select Menu–+Delete–+Delete this video–+Yes, then press OK to confirm.
® If you select “Delete All Videos”, all videos will be deleted.
• Locked files will not be deleted.
► Lock Videos:
(Din playback mode, select Menu–+Protection–+Lock One, and press OK button to confirm.
®If “Lock All” is selected, all videos are locked.
• Locked files will not be overwritten. When the maximum limit is reached, the SD card will be full and the message “Please format” will appear.
► Unlock Videos:
(Din playback mode, select Menu–+Protection–+Unlock One and press OK button to confirm.
®If you select “Unlock All”, all videos will be unlocked.
► Slideshow:
In playback mode, select Menu—+Slideshow—+ 2seconds/5seconds/8seconds to play all videos/pictures at intervals of 2sec/5sec/8sec.

System Setting Menu

❖ Setup Steps
Press Menu Button twice to access System Setting Menu in any mode.
The icon is highlighted in the upper left corner.
❖ Configuration Wizard
► Screen Protector :
Set the time to automatically turn off the LCD display after no operation. Optional: Off /30 seconds /1 minute /2 minutes.
*The screen display can be turned on/off by pressing the power button.
► Auto Power Off:
Set the camera to automatically shut down to save energy. Optional: off/3 min/5 min/8 min.
► Frequency:
Set light frequency to 50Hz or 60Hz, and press OK.
► Beep Sound:
Set the operation sound of the product.
► Language:
Language Settings : English/French/ Spanish/ German/ Italian/ Portuguese/ Japanese/ Chinese.
► Date/Time:
Change the time and date by using the “‘ and “, then press OK to confirm.

• To effectively record the date and time of your driving incident, please set the exact time immediately before using this equipment..
  ► Format:
  Format the Micro SD Card.
  ► Default Setting:
  Reset all settings back to factory default.
  ► Version:
  Displays the firmware version of the device.

Switching the LCD display

After engine start-up, each screen can be switched by pressing the • UP button.

1. Default Display
   This is the way the LCD screen displays the front and rear camera videos by default, with the rear camera video in the upper right corner.

2. 2-Split Display
   Front camera video and rear camera video are each displayed halfway on the screen.

3. Full Front Display
   The entire LCD screen displays only the front camera video.

4. Full Rear Cam
   The entire LCD screen displays only the rear camera video.

Checking Recorded Images

(1) Playing back images on your computer
You can use the included mini USB data transfer cable to easily connect to your PC/MAC to play or backup videos.

And we provide an additional USB card reader, which is more convenient than a USB cable to read the video in the SD card.

(2) Playing back images on the main unit
By pressing the mode button, ii will switch between “Video Recording Mode, Photo Taking Mode, Playback Mode” and finally select “Playback Mode”

Press the • UP or ‘r DOWN button to select a movie.
Press • UP button or T DOWN button long press to switch the recording file between rear camera and front camera.

How to Install the Suction Cup Bracket

(1) Peel off the transparent film for protecting the suction cup.
(2) While pressing the suction cup against the windshield, pull down the lever to fix the suction cup to the windshield.

How To Install The Front Camera

1. Text Installation Guide
2. Connect the power cord to the front camera and plug the power cord into the intersection of the ceiling and glass. Run the power cord down the A-pillar seam.
3. Pull the power cord along the door seam to the bottom of the storage compartment.
4. Run the power cord along the bottom of the storage box towards the cigarette lighter, then insert the cigarette lighter plug into the cigarette lighter hole.
5. Installation Attention
6. Be sure to connect directly to the car’s cigarette lighter socket with the supplied cigarette plug power cable.
7. Install within 20% of the top of the windshield. -When installing the unit, use a cleaning cloth to remove any grease or grime from the installation area.
8. Install the unit in a position that does not interfere with the operation of the room mirror or the drives field of vision. -Do not use any power cords other than the supplied or optional power cord.

How To Install The Rear Camera

Installation Guide
Step 1: Connect the black wire of the rear camera to the front camera through the HTML interface, and then connect the cable of the rear camera to the rear of the car
Step 2: There are 2 ways to install the rear camera
Position 1: Above the inner side of the rear windshield You can install the rear camera above the inner side of the rear windshield, and you can install it yourself, but this installation method cannot use the reversing vision function, and can only record rear-view video.

Position 2: The upper edge of license plate frame
The rear camera should be installed on the upper edge of the license plate frame, with the screw pad up, and connect the red wire of the rear camera with the live wire of the reversing light.

This installation method can realize the reversing vision function , but the installation is more difficult. It is recommended to find a professional to install it, or you can install it yourself.
Step 3: Start the engine and perform a test run.
Note: You can contact our after-sales mailbox below to get the installation video, or search for “Install the rear camera driving recorder” on YouTube to find instructional videos.

Install APP & Connect WiFi
1. Install APP
• Scan the follow QR to download.https://www.6zhentan.com/app/d0001/index.html

2. Connect Wifi

• Select wifi control in the menu and turn on WIFI.
• The WIFI SSID of the dash cam is displayed on the screen
• On the phone settings page, connect the wifi of the dash cam. WiFi password: 12345678
• After the connection is successful, open the APP to use it.

3. App Function Introduction

• Click [ ]to download the video to the phone.
• Videos will be divided into different types for easy search.
  Note: The video played back by the mobile phone is compressed. If you want to watch the original high-definition video, please download and play it on your mobile phone or insert the TF card into your computer to watch.

How to View Videos with GPS Information?

• This video must be taken after the recorder is connected to GPS.
• We need to disconnect the WiFi of the driving recorder and connect to our own WiFi.
• Open the app, and the video file inside will display information such as time, driving route, speed, locate

Main Function Introduction

1. Loop Video
   The options are 1 minute, 3 minutes, and 5 minutes for a video. When the TF card is full, the recorder will overwrite the original video and continue recording, you don’t need to delete the video manually.

2. Time-Lapse Video
   It is a shooting technique that compresses time. This feature can extend the recording video time of one card by 20 times. The options are 100ms, 200ms, 500ms, please use it according to the actual situation.

3. High Dynamic Range
   It is also called wide dynamic range technology, which is a technology used to let the camera see the characteristics of the image under very strong contrast.

4. Exposure Compensation
   Exposure compensation is an exposure control method, usually around ±2 ~ 3. If the ambient light source is too dark, you can increase the exposure value (eg, adjust it to +1, +2) to highlight the clarity of the picture.

5. Motion Detection
   Generally used for unattended surveillance video, the recorder will be turned on for 24 hours after connecting the step-down line.
   Note: The step-down line is the way to get electricity from the car battery, and this accessory needs to be purchased separately.

6. Recording
   Off – The recorded video without audio recording
   On – The recorded video has an audio recording

7. Date Labels
   Off – Recorded video without a date display
   On – Recorded video has a date display

8. G-sensor
   The dash cam with a built-in adjustable G-Sensor will automatically record and lock videos when it detects a sudden collision during driving and parking. preventing it from being overwritten, which ensures important footage is kept secure.

9. 24 Hours Parking Mode
   The dash cam pro also supports 24 hours parking monitor with time-lapse mode providing your car with 24-hour protection.

10. License Plate Number
    The video recorded with this feature turned on will display the license plate number.

11. Lane Offset
    After this function is turned on, the recorder will automatically detect the lane in the form of.

12.  Lane Offset
    After this function is turned on, the recorder will automatically detect the lane in the form of a multi-lane road and there are lane lines. If a large- scale direction deviation occurs, a drip alarm will be issued. This function is an auxiliary function, and it only works when there are lane lines.

13. Headlight Reminder
    When this function is turned on, it will prompt to turn on the headlights when the light is very dim at
    night.

14. Screen Saver
    30 seconds 1 minute 2 minutes, after selecting the corresponding time, the recorder will automatically turn off the screen after the corresponding time when the recorder is turned on, but the recorder is still working. This protects the screen.

15. Automatic Shutdown
    3 minutes, 5 minutes , 10 minutes, when the corresponding time is turned on, the recorder will automatically shut down at the corresponding selected time when the recorder is not recording and the front screen is a still image. “‘This feature is recommended to be turned off.

16. Wifi Control
    Turn on this feature when you need to connect your phone.

17. Light Source Frequency
    S0HZ, 60HZ means that the number of times the material completes periodic changes in 1s is S0Hz or 60Hz.

18. Button Sound
    The size of the prompt sound emitted by the speaker when the button is pressed.

19. Language Settings
    Support multi-language.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>