LEDVANCE 4058075504783 WIFI NEON FLEX User Manual
- June 15, 2024
- LEDVANCE
Table of Contents
LEDVANCE 4058075504783 WIFI NEON FLEX
Product Information
Specifications
- Product Name: SMART+ WIFI NEON FLEX
- Model: SMART WIFI NEON FLEX 3M RGBTW IP44, SMART WIFI NEON FLEX 5M RGBTW IP44
- EAN: 4058075504783 (3M), 4058075504806 (5M)
- Power Consumption: 15W (3M), 20W (5M)
- Luminous Flux: 1260lm (3M), 2100lm (5M)
- Light Source: RGBTW
- Color Temperature: 2700-6500K
- Operating Temperature: -20°C to +40°C
- Voltage: 220-240V
- Frequency: 50/60Hz
- IP Rating: IP44
- Weight: 670g (3M), 930g (5M)
- Dimensions (LxWxH): 3000mm x 17.5mm x 10mm (3M), 5000mm x 17.5mm x 10mm (5M)
Product Usage Instructions
Unpacking and Preparation
Before using the SMART+ WIFI NEON FLEX, please follow the steps below:
- Remove the product from the packaging.
- Make sure the power supply is disconnected.
Mounting the SMART+ WIFI NEON FLEX
To mount the SMART+ WIFI NEON FLEX, please follow the steps below:
- Ensure the mounting surface is clean and dry.
- Peel off the backing tape from the adhesive side of the light strip.
- Align the light strip on the desired surface and firmly press it down to secure it in place.
Connecting to Power
To connect the SMART+ WIFI NEON FLEX to power, please follow the steps below:
- Ensure the power supply is disconnected.
- Connect the provided power adapter to the input connector on the light strip.
- Plug the power adapter into a suitable power outlet.
Controlling the SMART+ WIFI NEON FLEX
To control the SMART+ WIFI NEON FLEX using your smartphone or compatible device, please follow the steps below:
- Download and install the SMART+ app from your device’s app store.
- Follow the app’s instructions to set up and connect the SMART+ WIFI NEON FLEX to your home Wi-Fi network.
- Once connected, you can use the app to control the color, brightness, and other settings of the light strip.
Frequently Asked Questions (FAQ)
Q: Can I connect multiple SMART+ WIFI NEON FLEX strips together?
A: Yes, you can connect multiple strips together using the provided connectors. Please refer to the user manual for detailed instructions on how to connect multiple strips.
Q: Can I cut the SMART+ WIFI NEON FLEX to a shorter length?
A: No, cutting the light strip may damage the product and void the warranty. It is recommended to use the light strip at its full length or consult the manufacturer for further assistance.
Q: Can I use the SMART+ WIFI NEON FLEX outdoors?
A: The SMART+ WIFI NEON FLEX has an IP44 rating, which means it is suitable for indoor and outdoor use. However, it is recommended to protect the light strip from direct exposure to water and extreme weather conditions.
REQUIRED TOOLS
DIMENSIONS
HOW TO CONNECT
SAFETY WARNING
- Do not connect the rope light to the supply while it is wound onto a reel
- Do not use the light strip when covered or recessed into a surface.
- The string of lights may not be operated within the packaging
- Do not open the light strip
INSULATION
TROUBLESHOOTING
DECREASE DISTANCE
RESET
- REFERENCE CONTROL SETTING: 3500K
Hereby, LEDVANCE GmbH declares that the radio equipment type LEDVANCE SMART+ Device is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: smart plus. advance. com/declaration-of-conformity. Wireless radio used in WIFI lamps/luminaires/components 2412–2472 MHz, max. RF output power 20dBm. Wireless radio used in Bluetooth lamps/ luminaires/components 2402–2480 MHz, max. RF output power 16dBm
- This product contains a light source of energy efficiency class
.
LEDVANCE GmbH
- Steinerne Furt 62
- 86167 Augsburg, Germany
- www.ledvance.com
Points de collecte sur www.quefairedemesdechets.fr
References
- Declaration-of-conformity | LEDVANCE
- SMART+ | LEDVANCE
- Declaration of Conformity | LEDVANCE
- Corporate website | LEDVANCE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>