ZA A H-935 Electric Air Pump User Manual
- June 15, 2024
- ZA A
Table of Contents
Electric Air Pump
H-935
Please read this manual carefully before use and keep it properly for future reference.
Important Notes
Safety Warnings
- Do not immerse the air pump in water or any other liquids to avoid causing fire, leakage or other personal injury.
- Do not operate the air pump in an explosive environment (for example, a place with flammable liquid, gas or dust). Sparks from the air pump may ignite dust or smoke.
- Do not use the air pump for absorbing any solid or liquid, so as to avoid causing machine failure, electric shocks, leakages and other safety accidents. (This product has no filtering function.)
- Do not expose the air pump to rainy or humid environments. If water enters the air pump, it may increase the risk of electric shock.
- Do not hit the air pump forcefully during operation. If there is abnormal noise, please stop using it immediately.
- Do not discard the air pump and rechargeable batteries into household garbage.
- Please check whether the parts are misaligned, stuck or damaged, and other conditions that may affect the operation of the air pump during daily use.
About Products
Product Parameters
Product Dimension: 1815655mm
Battery Capacity: 2*2000mAH
Charging Time: 3.5~4.5H
Product Weight: 384g
Nominal Voltage: 7.2V
Charging Mode: USB Type-C (5V Input)
On-Off Manner: Press once to switch on/off
Product Structures
- Inflation Port
- Deflation Port
- Indicator Light
- USB Charging Port (Type-C)
- ON/OFF Button
Air Pump USB Charging Cable (Type-C)
Nozzle A Nozzle C
Nozzle B Nozzle D
Tips: Nozzle C and Nozzle D need to be used together to compress vacuum bags (for home use).
Product Use
1- The air pump cannot be used alone, the corresponding nozzle needs to be
installed on first.
2- The air pump has no gear adjustment button, press the power button once to
switch on, and press again to switch off.
3- During use, the indicator light is continuously blue.
4- When the battery is exhausted, the indicator light will flash blue.
Precautions
- Please check whether the air pump and accessories are intact before use.
- Do not block the inflation/deflation port during working.
- The inflation/deflation port should be far away from the head, face, fingers, bare fee or loose clothing when using the air pump.
- Do not leave the activated air pump unattended.
- The product is not applicable for inflatable soft balloons, air column bags, bicycle and car tires, basketball, football and other balls.
- Please keep the air pump out of reach of children to avoid accidents.
- It is normal for the air pump body to become a little heat during working.
Installation of Accessories
Tips:
- To avoid affecting the inflation effect, please remove the nozzle on the deflation port when inflating. Vice versa.
- The installation methods of nozzle A, nozzle B, and nozzle C are the same. The installation methods of nozzle C and nozzle D are introduced here below.
1 Align the buckle (2) to the bump (1) , and insert it follow the direction of the arrow.
- Nozzle C
2 Twist the nozzle in the direction of “locked” until it’s locked.
The installation methods of nozzle A, B are the same as above. (Step 1 & 2)
- Nozzle C
3 Put the nozzle D on nozzle C
(Refer to the figure on the right.)
Tips: Nozzle C and Nozzle D need to be used together to compress vacuum bags (for home use).
Nozzle C + Nozzle D
Applicable Products
Applicable for inflating and deflating various inflatable toys, sofas, beds, yoga balls, pools, and swimming rings etc., as well as compressed vacuum bags.
Swimming ring Yoga ball
air bed air pool
air Sofa Vacuum bag
Non-applicable Products
Not applicable for inflating soft balloons, air column bags, bicycle/car tires, basketball/ football and other balls.
Soft balloon Basketball, football, volleyball, etc.
Air column bag Bicycle, car tires
Fault Handling
Fault Symptoms
| Possible Causes|
Solutions
---|---|---
The air pump stops working| 1. Overheating protection function activated.
2. The battery is dead.
3. Manufacturing defects.| 1. Wait for the air pump fuselage to cool down
and restart it.
2. Fully charged the air pump and restart it.
3. Contact our after-sales team.
Cannot be 100% inflated or deflated| The nozzle is not completely inserted
into the air hole of the inflatable products.| Insert the nozzle fully into
the air hole.
The nozzle keeps falling during work| The nozzle is not tightened when it is
installed on the inflation/deflation port.| Twist the nozzle in the direction
of “locked” until it’s locked.
ATTENTION:
After many tests, when the air pump works continuously for about 15-20 mins, it will trigger the overheat protection function and stop working.
When the battery is exhausted, the indicator light will flash blue.
Routine Maintenance
Product Maintenance
- Do not immerse the air pump in water for cleaning, you can use a dry/wet towel to wipe the fuselage. (accessories can be washed with water)
- The accessories must be completely dried before use.
- Please use the included USB charging cable (Type-C) to charge the air pump.
(The indicator light will flash blue while charging, and will stay on blue after fully charged.)
Product Storage
- Please put the air pump and accessories back into the box after use to avoid losing of accessories.
- When not in use, please pack the air pump in a plastic bag to prevent dc (The indicator light will flash blue while charging, and will stay on blue after fully charged.) ust from entering and affecting future use.
- In the case of not using for a long time, you need to fully charge the air pump once in a while (about one month) to extend its service life.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>