MEDIASHOP M19175 Panta Safe Light Instruction Manual

: June 15, 2024
: MEDIASHOP

Table of Contents

MEDIASHOP M19175 Panta Safe Light
PRODUCT INFORMATION
Parts description
SETUP
INSTALLING BATTERIES
INSTALLATION
Specifications
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

MEDIASHOP M19175 Panta Safe Light

PRODUCT INFORMATION

The MEDIASHOP M19175 Panta Safe Light is an innovative lighting solution designed to enhance safety and convenience in various settings. This versatile lighting product combines cutting-edge technology with user-friendly features to provide an effective and reliable lighting solution.

Applications:

Home Security: Illuminate dark areas around your home to enhance security.
Pathway Lighting: Guide your way with motion-activated lighting for pathways and entrances.
Emergency Lighting: Serve as a reliable source of illumination during power outages or emergencies.

In conclusion, the MEDIASHOP M19175 Panta Safe Light offers a blend of modern technology and practical design, making it a valuable addition to any space where safety and convenience are a priority.

Parts description

A. LED Lights
B. Battery Compartment
C. Motion Sensor
D. Mounting Base
E. Mounting Base Twist Lock
F. 360˚ Swivel Twist Lock
G. 3 x Screws + Anchors

Delivery contents:

1 x Panta Safe Light incl. mounting base

( Note : batteries not included)

IMPORTANT NOTICE

Before installing and using the Panta Safe Light, please read all instructions carefully and retain for future reference.
DO NOT position the Panta Safe Light in a location that is constantly exposed to water. The lamp is watertight, but continuous exposure can cause water to seep into the device.
Discontinue use of the Panta Safe Light if it is damaged.
The product is not suitable for room lighting in the home.
Keep small parts out of the reach of children – risk of swallowing.
The product is not a toy – keep out of reach of children.
This appliance may be used by children above the age of 8 years, by persons of reduced physical, sensory or mental capabilities or by persons with insufficient experience or knowledge, provided they are supervised or have received instruction in the safe use of the appliance and understand the associated risks. Extreme caution is advised when using the device near children and when leaving it unattended. It must be ensured that children do not play with the appliance. Use caution when using close to eyes.
Take care that the skin, eyes and mucous membranes never come into contact with battery fluid/acid. In case of contact with battery fluid, immediately rinse affected areas with plenty of clean water and consult a physician.

SETUP

INSTALLING BATTERIES

(ill. 2) $MEDIASHOP-M19175-Panta-Safe-Light-fig- $2$$

CAUTION : Only use 1.5V batteries Never mix old and new batteries. Never mix alkaline batteries with normal (zinc-carbon) batteries or rechargeable (nickel-cadmium) batteries. Never tamper with batteries. Insert the batteries in the battery compartment according to the polarity markings. Do not insert the batteries in the opposite direction to the markings. Correctly dispose of batteries.

Turn the front of the device anti-clockwise until it is in the unlocked position.
Pull the front completely out of the base to expose the battery compartment.
Press both locking tabs and remove the battery compartment cover.
Insert 4 x 1.5V batteries as shown (batteries not included). Close the cover by placing the locking tabs flush and pressing down until you hear a click.
Place the front of the device back in the base, making sure that the front side is flush with the device. Twist the device clockwise until it is closed.

NOTE : The Panta Safe Light has a twilight sensor which ensures that the light is only on in the dark. Be sure to test the Panta Safe Light in a dark area, such as in a cupboard, before mounting it, to be certain that the batteries are correctly installed.

INSTALLATION

(ill. 3)

$MEDIASHOP-M19175-Panta-Safe-Light-fig- $3$$

Remove the base by turning the rotating bolt on the mounting base anti-clockwise.
Select the mounting location and mark where the holes should be drilled with a pencil. Then drill the holes in the marked areas and insert the dowels.
Use a screwdriver to screw the supplied screws through the holes in the base into the anchors. Make sure the base is firmly attached.
Return the Panta Safe Light to the mounting base. Adjust direction of light by using 360˚ Swivel Twist lock – turn left to loosen, turn right to tighten.

REPLACING BATTERIES AFTER INSTALLATION
Changing batteries after the Panta Safe Light has been installed is easy – you do not need to remove entire mounting base. When light is dull or no longer active, simply remove the Panta Safe Light from the mounting base by turning the screw cap on the mounting base. Twist lock and follow instructions as directed in „INSTALLING BATTERIES“.

INFORMATION ABOUT THE PANTA SAFE LIGHT

The Panta Safe Light will only activate in darkness.
Motion within 10 metres will cause the Panta Safe Light to turn on.
The Panta Safe Light will remain on for 20 seconds after motion is detected, then automatically turn off.

Specifications

IP65, Batteries:

4 x 1.5V D,
Power 6V 5W
Protection rating III
This product complies with the European directives.

Disposal
This symbol means that such electrical equipment or batteries must not be disposed of with normal household waste. You are legally obliged to hand in such items – free of charge – to a public collection point or distributor- created collection point for the recycling of electrical devices and expired bulbs and batteries within the scope of the Electrical and Electronic Equipment Act that are not encapsulated by or fixed into the appliance, and can be removed or separated from the appliance non-destructively, for disposal at the end of their service life. Use rechargeable batteries instead of single-use batteries wherever possible. The recovery and recycling of old appliances makes an important contribution to protecting our environment. Improper disposal can result in toxic substances being released into the environment, which can have harmful effects upon people, animals and plants. Batteries with an increased pollutant content are also marked with the following symbols: Cd = cadmium, Hg = mercury, Pb = lead. Consumers are themselves responsible for deleting any personal data from appliances.

MediaShop GmbH Schneiderstraße 1, Top 1 2620 Neunkirchen Austria office @mediashop-group.com| www.mediashop.tv

Made in China