MEDIASHOP Steam Twister Steam Cleaner Instruction Manual

: June 13, 2024
: MEDIASHOP

Table of Contents

MEDIASHOP Steam Twister Steam Cleaner
Scope of delivery and description of the parts
Intended use
SAFETY & INSTALLATION
IMPORTANT SAFETY INSTRUCTIONS
Accessories tips
CLEANING, MAINTENANCE AND STORAGE
TROUBLESHOOTING
Technical specifications
SYMBOLS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MEDIASHOP Steam Twister Steam Cleaner

MEDIASHOP-Steam-Twister-Steam-Cleaner-PRODUCT-IMG

Scope of delivery and description of the parts

Handle
Cable clamps
Telescopic pole spring lock
Telescopic pole
Steam button
Rotation button
Appliance
Handle
Water tank
Mop head with rotary gear
Pad holders
Large plastic circular brush
Corner nozzle
Scraper attachment
Jet nozzle
Small metal brush
Measuring cup

MEDIASHOP-Steam-Twister-Steam-Cleaner-FIG-1

Intended use

WARNING NOTE: The appliance is intended for private use only. Never use the appliance for purposes for which it is not intended. Claims of any kind due to damage resulting from improper use are excluded. The user bears all such risks themselves.

CAUTION

The release button must always be pressed when attaching and detaching the mop head, otherwise you may damage the appliance.
The functionality of the appliance was tested before shipping, so there may still be water residue inside.
Slight droplet formation may occur during operation. This is condensation water. This is completely normal, and does not affect functionality in any way.

SAFETY & INSTALLATION

Read these operating instructions carefully before using the electrical appliance!
Observe the safety instructions when putting the electrical appliance into operation in order to prevent damage to property or personal injury. Follow all safety instructions to avoid damage that could result from incorrect use! Retain this instruction manual for future reference. If the electrical appliance is passed on to third parties, these operating instructions must also be handed over.

IMPORTANT SAFETY INSTRUCTIONS

Check that the mains voltage corresponds to the information on the type plate of the appliance.
A risk of burns exists! Improper use can lead to injuries, scalds and electric shocks.
Do not leave the appliance unattended while it is plugged in. Unplug the power cord when the appliance is not in use and before servicing.
This appliance may only be used by children over the age of 8, by individuals with impaired physical, sensory or mental capabilities, or by individuals not experienced or knowledgeable in the use of this appliance provided that they are supervised or instructed on how to use this appliance safely and understand the hazards involved.
Children must not use the appliance as a toy. Cleaning and maintenance should not be carried out by children unless under adult supervision.
Keep the appliance and the power cord out of reach of children under the age of 8 while it is in operation or when it is cooling down.
Never direct steam in the direction of people, animals or plants.
Do not immerse the appliance in water or other liquids.
Do not use if the power cable or plug is damaged.
If the appliance does not operate properly, or has been dropped or damaged, left outdoors or submerged in water, it must be returned to the manufacturer or an authorized repair facility as a precautionary measure.
Do not pull or carry by means of the cable, do not use the cable as a handle, do not close doors or windows over the cable or wrap the cable around sharp corners or edges. Keep the cable away from heated surfaces.
Never forcefully plug the plug into the socket.
Do not use extension cords or multi-sockets with insufficient current capacity.
Unplug after each use. To disconnect the plug safely, grasp the plug and gently remove it from the socket.
Do not pull on the cord to unplug the appliance.
Do not touch the plug or appliance with wet hands or operate without shoes.
Never insert any objects into the openings of the appliance.
Only use the mop head when the pads are properly attached.
Do not use if the water tank is empty.
Apply extra caution when using on stairs.
Store the appliance in a cool and dry place.
Always keep the area in which you are working well-lit.
Never pour hot water or other liquids, e.g. alcohol-based liquids or detergents, into the water tank. This makes operation unsafe and will damage the appliance.
Keep the steam outlet unobstructed at all times. Keep the vents free of lint, hair, or any other possible blockage to ensure a proper steam flow.
Use of accessories not supplied or sold by the manufacturer may result in fire, electric shock or injury.
Liquid or vapour should not be directed toward equipment containing electrical components, such as oven interiors.
Do not expose to rain.
If you observe water leakage, cease use of the appliance and contact a qualified technician.
Do not use the appliance in an enclosed space where flammable, explosive or toxic fumes, such as paint thinner or oil paints, could be present.
Do not use on leather, wax-polished furniture or floors, or parquet floors, synthetic fibres, velvet or other delicate materials sensitive to water vapour.
Remove the plug from the mains before undertaking maintenance and cleaning work.
Do not touch the hot surfaces.
Use the appliance only for the purpose intended.
Caution should be exercised when using the appliance due to the emission of steam.

BEFORE FIRST USE (#2-3)

Before first use, remove any stickers, protective films or protective covers.

WARNING: Please make sure the appliance is unplugged before assembling it or changing accessories.

Attaching the mop head to main unit (#2): Place the mop head on the floor. Now push the end of the main unit onto the connector on the mop head until it snaps into place. Do not use force, and pay attention to the pins on the plug connection.
Assembling & fixing the telescopic pole (#3): The two parts of the aluminium tube of the telescopic pole are pre-assembled. Open the telescopic pole latch and pull out the thinner pole of the tube, then fix the telescopic pole into place by closing the telescopic pole latch. Attaching the handle: Now attach the handle to the thinner end of the telescopic pole, making sure that the two pins on the handle engage in the two holes on the telescopic pole.
Attaching the telescopic pole to the appliance (#4): Now insert the telescopic pole into the upper opening on the main appliance, paying attention to the semicircular notches on the telescopic pole. The snap lock on the rear side of the telescopic pole must point backwards.
Adjusting the telescopic pole (#5): Open the telescopic pole latch and slide the telescopic pole in/out to the desired length. Fix the telescopic pole in place by closing the telescopic pole snap lock.
Attaching the pads (#6): The microfibre pads are attached to the mop head with 4 Velcro fasteners each. Place the microfibre pads on the round pad holders and firmly press the edges of the pads.

USE
Floor surfaces such as marble, ceramic, stone, linoleum, sealed hardwood floors and real wood parquet can be cleaned with the Livington Steam Twister.

Filling and inserting the water tank (#7)

Push the water tank release button above the water tank upwards to allow removal of the water tank.
Turn the water tank upside down and open the tank’s screw cap. Now fill the tank with water. Use the measuring cup if necessary. Do not remove the metal ball or hose from the water tank. Make sure the metal ball in the water tank is always fully immersed in water during operation.
Close the water tank with the screw cap. Insert the water tank back into the appliance, making sure the tank snaps firmly into place.

Note: Ordinary tap water can be used for the Livington Steam Twister. However, in areas with hard water, we recommend using distilled water for better performance.
Note: In certain cases, the visible hose in the water tank can be kinked. This impairs the operation. You should remove the kink from the hose.

TIP: For a particularly fresh scent when cleaning, we recommend using the Livington steam scent. This is available as an additional accessory. Particularly suitable for households with pets. Simply add 2 to 3 squirts into the appliance’s water reservoir.

Switching on & using the appliance

Plug the power cord into an earthed mains outlet. Press the steam button. The appliance will now start heating up, the temperature display will flash red while it is heating up and the appliance will begin to tick after a certain period of time has elapsed. Once the temperature is reached, the temperature indicator will turn solid red and the blue vapour indicator will light up. The first steam level is now activated. Note: The appliance may drip from the time it is started up until the target temperature is reached. This is not a malfunction, but a normal part of the heating-up process. To stop the steam emission, switch the appliance off using the on/off switch.
Steam level regulation (#8): You can choose between 3 steam intensities.
• GREEN steam indicator (Level 1): The first steam level is automatically activated after heating up. The steam level indicator lights up green.
• BLUE steam indicator (Level 2): Press the steam button again (for the second time), the steam level indicator lights up green and the medium steam level is activated.
• RED steam indicator (Level 3): Press the steam button again (for the third time), the steam level indicator lights up red and the strongest steam level is activated.
• To turn off the steam, press the steam button a fourth time.
Activating the rotation: To activate the rotation of the pads, press the rotation button after selecting the steam level. Disabling the rotation: Press the rotation button again to deactivate the rotation.
Note: You can deactivate both the rotation and the steam completely, for example dry polishing without steam but with rotation, or cleaning surfaces with steam only and without rotation. The rotation can only be activated when the mop head is attached to the appliance. The rotation function is not possible with any other attachment.
Slowly move the appliance over the surface to be cleaned. The absorbent microfibre pads absorb the dirt that has been loosened by the steam. Apply the steam liberally. Have a towel ready to wipe away any excess water that may gather.
Water level warning: If the temperature and steam display flashes 6 times or you hear a ticking noise, the appliance is indicating a low water level. Once the appliance stops emitting steam, refill the water tank to continue cleaning, or turn off the appliance and stop cleaning. The appliance allows filling of the tank when it is activated, as it has an automatic water function that stops the steam process as soon as the tank is empty.
Turning off the appliance: After each use, ensure that the appliance is SWITCHED OFF and unplugged from the outlet so that it is completely SWITCHED OFF before next use. If there is still water in the tank, you should empty it.

CONTROL PANEL & BUTTONS

a. Steam button
b. Rotation button
c. Temperature display
d. Steam level indicator

IMPORTANT INSTRUCTIONS FOR CLEANING REAL WOODEN FLOORS

Steam clean your real wooden floors at most every 3 days and only ever at Level 1 (lowest level).
Do not leave the device positioned over one place for more than 5 seconds when it is switched on.
Never pass over the same spot more than 3 times during cleaning; this should be enough to remove any dirt and will ensure maximum longevity of your wooden floors.
Do not use on untreated wooden floors.
Test the appliance on a small, isolated area of your floor before using it across the entirety of the surface!
Failure to follow these instructions can result in damage to a wooden floor (raised grain or similar).

General notes on use

This product emits steam and generates moisture. Water stains, discolouration or damage may appear at its base if the unit is operated in one place for too long.
Apply particular caution when using the appliance on vinyl, linoleum or other heat-sensitive floors.
Excessive heat can melt glue used on the floor. Only use the appliance on coated floors that have been professionally laid and do not have any cracks or gaps that would allow moisture to enter.
Test the appliance on a small, isolated area of your floor before using it across the entirety of the surface.
Never use the appliance in one place for too long. This can damage the floor surface. Never put your hands or feet under the mop. The appliance gets very hot.
A pulsing noise may be heard while the mop is working. This is a perfectly normal operating noise, and it means that the mop is producing steam. It is possible that some droplets of water will be generated along with the steam. This is also completely normal.
The power and temperature of the steam could adversely affect some materials. Therefore, always test the steam mop on an inconspicuous area first to ensure that the surface cannot be damaged by its use.

Tips for use

Sweep or vacuum the floor before using the appliance.
To prevent the formation of puddles, the microfibre pads must always be clean and dry. To ensure this, wring out the pads as needed.
To sanitize an area of your floor, allow it to work in one spot for about 10 seconds (but no longer than 15 seconds).
The mop can stand independently if you snap the handle forward.

USING THE HAND STEAM CLEANER
WARNING: Please make sure the appliance is unplugged before assembling it or changing accessories.
Note: Never remove or attach accessories while the appliance is in operation.

Press the semicircular telescopic pole release button (above the water tank release button) and pull the telescopic pole straight out of the unit.
Fill the water tank with water.
Either attach the desired attachment (see section: Using the accessories) or use the mop head.
Once the appliance is fully assembled and filled with water, plug the power cord into an earthed outlet.
Press the steam button.
The appliance will start emitting steam after about 10-15 seconds. Select the desired steam level using the steam button.
Slowly move the appliance over the surface to be cleaned.
If the handset stops emitting steam, refill the water tank if necessary and continue cleaning.
After each use, ensure that the appliance is SWITCHED OFF and unplugged from the outlet so that it is completely SWITCHED OFF before next use.

NOTES AND TIPS FOR USE AS A HANDHELD STEAMER

To hygienically clean work surfaces, kitchen counters, sinks, bathrooms, etc., let the steam cleaner work in one place for about 15 seconds.
Do not use the hand steamer on heat- and steam-sensitive materials. The power and temperature of the steam could adversely affect some materials. Therefore, always test on an inconspicuous area first to ensure that the surface cannot be damaged by its use.
Do not use the handheld steamer to clean leather, waxed furniture, waxed floors, synthetic materials, velvet, or other steam-sensitive materials.

USING THE ACCESSORIES (#9-10)

MEDIASHOP-Steam-Twister-Steam-Cleaner-FIG-9

Removing the mop head: Press the mop head release button and pull the mop head off the appliance.
Attaching the jet nozzle: Now attach the jet nozzle to the main unit, making sure that the round pin on the nozzle snaps into place on the main unit.
Attaching an attachment: Now attach the desired attachment (brush, corner nozzle) to the tip of the jet nozzle. Insert both pins at the tip of the power nozzle into the guide rail on the respective attachment, and turn the attachment to the left or right. To remove the attachment, twist it off again.

Notes on accessories
ATTENTION: Never use the round metal brush on scratch-sensitive surfaces. To remove the brush, turn it clockwise and pull it off the jet nozzle thread.

Accessories tips

The round plastic brush is perfect for stains that are extremely difficult to remove (e.g. paint on the floor) and is particularly suitable for cleaning smooth, hard surfaces such as toilets, sinks, kitchen worktops, wheel rims and stubborn stains of all kinds.
The small round metal brush, on the other hand, is particularly effective for cleaning hard surfaces, such as brick floors, grill grates, metal doors, metal frames and the like.
Both brushes are also highly effective for removing grease from pans, hotplates and ovens. You can also use them in combination with soap or cleaner on dirty areas.

CLEANING, MAINTENANCE AND STORAGE

WARNING: Make sure the appliance is unplugged before attempting any cleaning operations.
Cleaning the water tank
Empty and clean the water tank after each use. Use detergent to clean the accessories (jet nozzle and round brushes) if they are dirty. Then leave them to air dry.
Descaling the inside of the water tank
To get rid of limescale deposits inside the water tank, add a tablespoon or two of white vinegar to the waterfilled tank, put on the cap, and shake. DO NOT TURN ON THE STEAM CLEANER. Leave the container for a few hours. Afterwards, empty the tank, refill with fresh water, and rinse until no debris is visible.
WARNING: Never fully immerse the appliance in water.

Removal of limescale deposits
If the appliance begins to generate steam more slowly than usual, or stops producing steam altogether, limescale removal may be required. These deposits build up on metal parts over time and significantly affect the performance of the mop. Limescale deposits should be removed regularly, approximately after each 25 to 50 tank fills, or at least once a month. This is especially true in hard water areas. The cleaning intervals depend on the degree of hardness of the water and how intensively the mop is used.

To remove limescale deposits from the appliance, please follow the instructions below:
Cleaning with a cleaning solution

Prepare a solution of 1/3 white vinegar and 2/3 tap water and pour it into the water tank.
Fix the appliance in place, ensuring that the steam cleaner is not pointed at floors, surrounding objects or surfaces. Plug in the appliance, press the steam button and let it produce steam until the vinegar and water solution has all turned to steam.
Repeat the above process as many times as necessary until the steam output returns to a normal level.
Fill the water tank with fresh water and rinse.
Fill the water tank with fresh water, put it back on the appliance, and release steam until the tank is empty.
WARNING: SCALDING HAZARD
Never leave the steam cleaner unattended during the limescale removal process or during normal use.
Note: Before use, test the appliance in a suitable place to ensure that there is no debris remaining inside it.
Cleaning clogged accessories: Due to the high mineral content of water in some areas, you may experience less steam being generated by your handheld steam cleaner. This could be due to limescale deposits in the nozzle tip.
To remove limescale deposits, please proceed as follows: We recommend using a spray-on lubricant. Spray once or twice into the tip of the nozzle. Then, according to the instructions, fill the steam cleaner with water and continuously generate steam through the affected opening for a few minutes to remove the deposit.
Once the affected part is clean and the steam is free to exit, point the steam cleaner at a neutral surface or cleaning cloth to ensure no leftover particles are escaping with the steam.

Cleaning the microfibre pads
You can clean the microfibre pads in the washing machine.

Pad material: 100% polyester

Using the cable clamps (#11)
In order to fix the power cable of the appliance in a space-saving and practical way, the appliance comes with upper and lower cable clamps. Wrap the cable around the two cable clamps to keep it secure.

TROUBLESHOOTING

MEDIASHOP-Steam-Twister-Steam-Cleaner-FIG-20

Technical specifications

220-240V~ 50/60Hz 1300W

SYMBOLS

Caution! Hot steam|
Protection rating 1
This product complies with the European directives.

This symbol means that such electrical equipment or batteries must not be disposed of with normal household waste. You are legally obliged to hand in such items – free of charge – to a public collection point or distributor- created collection point for the recycling of electrical devices and expired bulbs and batteries within the scope of the Electrical and Electronic Equipment Act that are not encapsulated by or fixed into the appliance, and can be removed or separated from the appliance non-destructively, for disposal at the end of their service life. Use rechargeable batteries instead of single-use batteries wherever possible. The recovery and recycling of old appliances makes an important contribution to protecting our environment. Improper disposal can result in toxic substances being released into the environment, which can have harmful effects upon people, animals and plants. Batteries with an increased pollutant content are also marked with the following symbols: Cd = cadmium, Hg = mercury, Pb = lead. Consumers are themselves responsible for deleting any personal data from appliances.

Liability claims against the company Mediashop,
which relate to damage (except in the case of injury to life, body or health of a person, so-called personal injuries), material or immaterial in nature, caused by the use or non-use of the information provided or through the use of incorrect and incomplete information provided by third parties is fundamentally excluded, unless it can be proven that Mediashop acted with wilful intent or gross negligence.

RIGHT NOW PER KIT ORDER!

The perfect duo for even more cleanliness: the window cleaning attachment including microfiber pad for Sparklingly clean windows & the large cleaning attachment including microfiber pad for removing Dust & refresh textiles, now available in Pro Kit.

1x large cleaning attachment (also as a textile freshener suitable) including microfiber pad.
1x window cleaning attachment Includes microfiber pad.
2 x Replacement Microfiber Pads Also available: 2 replacement microfiber pads.

The perfect duo for even more cleanliness: the window cleaning attachment with microfibre pad for radiantly clean windows & the large cleaning attachment with microfibre pad for removing dust and refreshing textiles, now available as a set. Also available: 2 replacement microfibre pads. Order now: 0800 400 66 50 (accessible free of charge calling from DE, AT and CH) or at www.mediashop.tv.

Made in China

CH: MediaShop Schweiz AG | Leuholz 14 | 8855 Wangen | Switzerland
EU: MediaShop GmbH | Schneiderstraße 1, Top 1 | 2620 Neunkirchen | Austria
Forgalmazó: Telemarketing International Kft. | 9028 Győr | Fehérvári út 75. | Hungary
office@mediashop-group.com | www.mediashop.tv.
DE | AT | CH: 0800 37 6 36 06 – kostenlose Servicehotline | CZ: + 420 234 261 900 | SK: + 421 220 990 800 | RO: + 40 318 114 000 | HU: + 36 96 961 000 | ROW: +43 1 267 69 67
Stand 08/2023 | M34868 |M34869 | M34870 | M34871