GENIE ALDPS Aladdin Connect Smart Phone Instructions
- June 15, 2024
- GENIE
Table of Contents
GENIE ALDPS Aladdin Connect Smart Phone
Overview
App Using Instruction
You can use the app to guide you through the process of adding a DPS.
- From the dashboard screen (that shows your doors), press the blue (+) button at the top right of the screen and choose “Door” from the list of options.
- Next, choose the selection “Door Position Sensor for Existing Retrofit Device”.
- Follow the instructions in the app to continue adding a door position sensor to your existing retrofit kit. You can have 3 door position sensors total per retrofit kit.
If you are not using the app, the process of pairing another door position sensor (DPS) to the door control module (DCM) will look like this:
- Press and hold down an unlit DOOR button on the DCM until you hear a beep. The light above that DOOR button will begin flashing blue indicating that the door button is ready to be paired with a DPS. (Note – the button you choose should not be currently associated with another door; should not already be backlit with a blue LED).
- While the LED above the DOOR button is flashing blue, press and hold the button on the DPS until the blue LED on the DPS begins flashing slowly (about once per second). This indicates that the DPS is ready to be paired with a DOOR button on the DCM.
- When the DPS connects to the DOOR button on the DCM, the blue LED on the DPS will turn off (this process could take up to several minutes). Shortly after the blue LED on the DPS shuts off, the blue LED above chosen DOOR button on the DCM will turn solid. This indicates that the DOOR button on the DCM is now associated and communicating with the DPS.
Repeat the steps above to have up to 3 Door Position Sensors total for a single Door Control Module.
At the end of the process, your DCM should look like the above image – the number of DOOR buttons with the blue LED should represent how many DPS (and therefore doors) are connected to the DCM. You can have up to 3 DPS total connected to a single DCM product.
FAQs
If you require additional assistance, please contact us at 1-866-599-4995 or visit the Aladdin Retrofit Kit FAQ section of our website at https://www.geniecompany.com /aladdin-connect-faq-s. These FAQs contain detailed problem/solution scenarios as well as video links to assist you (https://www.geniecompany.com /aladdin-connect-installation-videos).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>