Thlevel QC3.0 USB Car Charger Socket Mini Dual Port Quick Charge Instruction Manual
- June 15, 2024
- Thlevel
Table of Contents
Thlevel QC3.0 USB Car Charger Socket Mini Dual Port Quick Charge
Introduction
Dual USB Car Charger Socket 36W QC3.0 USB Charger Socket Voltmeter LED Voltage with ON/OFF Switch for Marine, Boat, Motorcycle, Truck
Product Features
- Thlevel car USB charger has dual 36W QC3.0 charging ports, the port delivers the fastest charging efficiency up to 80% in 35 minutes, 4x faster than normal charger.
- The cable has a built in 10A fuse, which can provide overcharge, overcurrent, overheating and short circuit protection to ensure safety.
- Monitor the electrical system of the vehicle, the different colors flashing on the screen indicate the different voltage conditions of the car, so that you can always know the health status of the car.
Product Specifications
Power input: DC 9V-32V
Input current : ≤10A
Output voltage : ≤12V
Output current : ≤6A
Maximum power: 36W
Output of each USB port : DC 3.6V-6.5V / 3A, 6.5V-9V / 2A, 9V-12V / 1.5A
Cable length : 60cm
Weight : 50g
Package includes
1x Dual Ports USB Charger
1x Wire with 10A fuse
How to install?
- Drill a hole with about 1.13 inch, diameter by a hole opener.
- Unscrew the fastening nut, put the USB charger into the hole and screw it tight.
- The underside of this car USB charger is marked with “+” and “-” for plus and minus poles. Simply connect “+” to the positive pole of the battery, “-” to the negative pole.
Please Note
- The voltage only can be shown when switching on the button.
- For mobile phones that do not support fast charging, charge at normal speed.
- For mobile phones that support fast charging, you must use the original charging cable or fast charging cable to achieve fast charging.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>