Thlevel QC3.0 USB Charger Socket Instruction Manual
- June 14, 2024
- Thlevel
Table of Contents
Product instruction manual
Dual QC3.0 USB Charger Socket with Switch for 12V/ 24V Car Boats and
Motorcycle, Truck, SUV, UTV
Product Specifications:
Power Input: DC 12V-24V
USB Output Voltage: 5V
Output: 3.6-6.5V/3A; 6.5-9V/2A; 9-12V/1.5A
MAX Power: 18W
Product Features:
- USB car charger can provide fast charging speed for your tablet and other accessories at the same time, thus saving a lot of time.
- The cable has a built in 10A fuse, which can provide overcharge, overcurrent, overheating and short circuit protection to ensure safety.
- The car USB charger is equipped with a completely sealed protective cover, which is waterproof and dust-proof. Suitable for high temperature and low temperature (-20°C to 60°C) environment.
Notes:
- Please cover outlets when not in use to avoid dust and water entering. The voltage only can be shown when switching on the button.
- Since the iPhone series does not support fast charging, charging the iPhone is normal speed. For mobile phones that support fast charging, you must use the original charging cable or fast charging cable to achieve fast charging.
- Can’t support Super Fast Charge(5V 4A), such as HUAWEI P20, OnePlug 5T/6, etc.
Package includes:
2x Dual Ports USB Charger
2x Wire with 10A fuse
How to install?
- Drill a hole with about 1.13 inch, diameter by a hole opener.
- Unscrew the fastening nut, put the USB charger into the hole and screw it tight.
- The underside of this car USB charger is marked with “+” and “-” for plus and minus poles. Simply connect “+” to the positive pole of the battery, “-” to the negative pole.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>