kinderfeets Pikler Balance Beam User Manual
- June 15, 2024
- Kinderfeets
Table of Contents
kinderfeets Pikler Balance Beam
Product Specifications
- Product Name : Kinderfeets Pikler Balance Beam
- Intended Use : Toy for home setting
- Age Range : Not specified
- Supervision : Must always be used under adult supervision
- Storage: Should be stored indoors when not in use
Product Usage Instructions
Assembling your Kinderfeets Pikler Balance Beam
- Remove all packaging and check that all required parts are included.
- Loosely attach 2 Support Bars (C) to the 2 bottom holes of triangular Support Plates (B) using Bolts (E) and Allen Wrench (F). The upper Support Bar (C) with Spacers (D) can be attached at the top T or middle M hole to suit the child’s size and comfort.
- Tighten all bolts and screws using the Allen Wrench (F).
To set up as a balance beam
- Place a mount under each end of the beam.
- The mounts should be assembled at the same height.
To set up as a see-saw
- Place a mount under the center of the beam.
Ensure the beam’s connector hook fits securely over the mount’s support bar and does not shift around. Test for levelness and stability before using.
Using multiple Kinderfeets Pikler units together
The Kinderfeets Pikler Balance Beam can be used with other units in the
Kinderfeets Pikler gym system. The beam has hooks at each end that can connect
securely to units with climbing rungs, such as the Kinderfeets Pikler Climbing
Triangles and Arches.
To ensure a safe and stable connection between separate Pikler units
- Check that each connector hook is fitted securely over a rung and does not shift around.
Attention : Adults must set up the gym and connections between units and verify the structural integrity before allowing children to use it. For safety, Kinderfeets Pikler units should not be attached by any other method not indicated in this manual.
Precautions
Before using your Kinderfeets toy
- Check that it is undamaged, assembled correctly, and that all screws and parts are securely fastened.
- Regularly check for signs of wear, cracking, damages, or defects. A damaged toy should no longer be used.
Clean your Kinderfeets toy using a mild cleaning agent, clean water, and a soft cloth.
Always store your Kinderfeets toy indoors in a cool, dry, and well-ventilated location. Avoid storing it in areas with high humidity or where water condensation can build up overnight.
FAQ
-
Q: What age range is the Kinderfeets Pikler Balance Beam suitable for?
A: The age range for the Kinderfeets Pikler Balance Beam is not specified in the user manual. However, it is designed for a home setting and must always be used under adult supervision. -
Q: Can the Kinderfeets Pikler Balance Beam be used outdoors?
A: The Kinderfeets Pikler Balance Beam can be used outdoors, but adverse weather conditions such as wet weather, windy conditions, damp ground, or extreme hot and cold temperatures should be avoided. It is recommended to store the toy indoors when not in use. -
Q: Is the Kinderfeets Pikler Balance Beam covered by a warranty?
A: The user manual mentions a limited warranty, but specific details about the warranty are not provided. It is recommended to contact the manufacturer for more information regarding the warranty.
User Manual for the Kinderfeets® Pikler Balance Beam
- Please read the entire manual before using your Kinderfeets toy.
- Thank you very much!
- The versatile Kinderfeets Pikler Balance Beam can be set up as a balance beam or seesaw for endless play opportunities. A low beam design with 2 height settings supports safe exploration of balance and coordination for children ages 18 months to 8 years.
- Through active developmental play with the Pikler gym system, children simultaneously improve gross motor skills, build physical strength, gain confidence, and spark their imagination to develop at a natural pace.
- Crafted using responsibly-sourced birchwood, it’s a wonderful, sustainable option for little ones exploring their adventurous side. Each set is finished with a water-based varnish for smooth, comfortable play and easy cleaning.
- The Kinderfeets Pikler Balance Beam is compatible with units in the Kinderfeets Pikler gym system, designed to be used together in a safe and stable manner. Combine multiple Kinderfeets Pikler units to create a dynamic play gym for your toddler to explore!
- Note : The Kinderfeets Pikler Balance Beam is a toy. It’s designed for a home setting only and must always be used under adult supervision. Do not set it up on a hill, cliff, ledge or busy street. Avoid adverse weather conditions when playing outdoors (this includes wet weather, windy conditions, damp ground or extreme hot and cold temperatures). Toy should be stored indoors when not in use.
WARNING! Must be assembled by an adult.
Children should be supervised by an adult while playing.
Use safely!
Please read these instructions before using your Kinderfeets toy. This toy
must be used with care at all times to avoid injury.
- Check the toy for damage or other problems before using for the first time. Continue checking it regularly for signs of wear, cracking, damage or defects. Do not allow children to use the toy until an adult has checked that its parts are correctly assembled and securely fastened, and its structural integrity has been evaluated and verified.
- Recommended for children ages 18 months to 8 years. However, each child’s development is unique. Common sense should be used to assess a child’s ability to use this toy safely based on their size, fine motor and coordination skills.
- Intended for use with children up to 45 kg (100 lb).
- Children should only use this toy under the supervision of an adult.
- Must be used in a safe and sensible manner. Apply common sense at all times. Never use this toy on stairs, near swimming pools, on public roads, steep hills, unstable surfaces or areas with traffic.
- Keep packaging away from children to avoid injury or suffocation.
- This is a wooden product. Damage may occur if it’s dropped or handled roughly on hard surfaces. Wear and tear is not covered by warranty.
Assembling your Kinderfeets Pikler Balance Beam
Remove all packaging. Check to ensure all required parts are included.
- Loosely attach 2 Support Bars (C) to the 2 bottom holes of triangular Support Plates (B), using Bolts (E) and Allen Wrench (F). The upper Support Bar (C) with Spacers (D) can be attached at the top T or middle M hole to suit the child’s size and comfort.
- Tighten all bolts and screws using the Allen Wrench (F).
- To set up as a balance beam: Place a mount under each end of the beam. The mounts should be assembled at the same height.
- To set up as a see saw: Place a mount under the center of the beam.
- Ensure the beam’s connector hook fits securely over the mount’s support bar and does not shift around. Test for levelness and stability before using.
Using multiple Kinderfeets Pikler units together The Kinderfeets Pikler Balance Beam may be used with other units in the Kinderfeets Pikler gym system. The beam has hooks at each end that can connect securely to units that have climbing rungs such as the Kinderfeets Pikler
Climbing Triangles and Arches.
- To ensure a safe and stable connection between separate Pikler units, check that each connector hook is fitted securely over a rung and does not shift around.
- Attention : Adults must set up the gym and connections between units, and verify the structural integrity prior to allowing children to use it. For safety, Kinderfeets Pikler units should not be attached by any other method that is not indicated in this manual.
- Precautions : Before using your Kinderfeets toy, please check that it is undamaged, assembled correctly and that all screws and parts are securely fastened. Check it regularly for signs of wear, cracking, damages or defects. A damaged toy should no longer be used.
- Clean your Kinderfeets toy using a mild cleaning agent, clean water and soft cloth.
- Always store your Kinderfeets toy indoors in a cool, dry, and well-ventilated location—especially in a tropical or subtropical climate, or any location subject to high humidity and/or high rainfall. Do not store it in a location where water condensation can build up overnight (such as in a shed or on a balcony outside); or in an area with high humidity (such as a bathroom or laundry room with a condensation dryer).
Limited warranty
- Kinderfeets guarantees that its products will be free from manufacturing defects for one year from the date of purchase. You must submit an ORIGINAL copy of the proof of purchase for repairs or exchanges. This warranty and Kinderfeets’s obligations are restricted to the repair or replacement of products with certified defects occurring within the warranty period. This warranty does not apply to damages caused by weather (including but not limited to wind, rain, dew, or water condensation), improper use, accidents, improper storage (including storage in high humidity areas), and normal wear and tear caused by normal use.
- Kinderfeets is not liable for accidents or subsequent damages resulting directly or indirectly from the use of its products. The purchaser and user bear all risks associated with using this toy. This includes physical injury and/or death. Adult supervisors are responsible for ensuring that appropriate safety measures are taken. Kinderfeets will not be liable for personal injury or property damage under any circumstances. To use a Kinderfeets product, you must agree with the above guidelines.
- At Kinderfeets, we do our best to ensure the quality of our products. However, we know no manufacturing process is perfect or defect-free. To report or return a damaged item, please send an e-mail to info@kinderfeets.com. Please attach a description of the problem and a picture, if possible, as this will help us understand the situation. You will receive further information or a return address so you can send the toy back to us.
If you have any questions, please contact Kinderfeets at
Kinderfeets, Inc.
- info@kinderfeets.com
- +1 415 738 4820 @KINDERFEETS
- www.kinderfeets.com
- ©2023 Kinderfeets, Inc. All rights reserved. U.S. Patent No. 8,191,931 and patents pending. Rev0523V1
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>