home KPE 6038S HURRICANE Series Kitchen Extractor Instruction Manual

KPE 6038S HURRICANE Series Kitchen Extractor

Product Information: KPE 6038S KPE 6038W KPE 6038B

Specifications

• Model: KPE 6038S, KPE 6038W, KPE 6038B
• Series: HURRICANE series
• Power: Maximum 1.5 W
• Voltage: 220 V-240 V
• Dimensions: Pravougaonik: 33.2 mm x 120 mm

Product Parts

• Rucica za odabir cirkulacije (Circulation selection handle)
• Telo ureaja (Device body)
• Filter za masnocu (Grease filter)
• Delovi za montazu (Mounting parts)
• Ugljeni filter (Carbon filter) – Optional
• Leptir klapna (Butterfly valve)
• Poklopac (Cover)
• Sarafi 5 mm x 49 mm (Screws 5 mm x 49 mm)
• Plasticne tiple (Plastic plugs)

Installation

Choose the type of air circulation:

• Eksterni odvod vazduha (External air exhaust): In this position, the air is expelled from the room.
• Unutrasnja cirkulacija (Internal air circulation): In this position, the air circulates within the room.

Usage

• Motor Switch: Press this switch to stop the motor.
• Speed Switch: When pressed, the motor will operate at low speed.
• Speed Switch: When pressed, the motor will operate at medium speed.
• Speed Switch: When pressed, the motor will operate at high speed.
• Light On/Off Switch: Press this switch to turn on the light and press it again to turn it off.

Usage Tips:
Clean the ventilation fans regularly. Do not allow grease to accumulate on the fan or filter.

Troubleshooting

Problem: Light is on but motor is not running.

• Possible Cause: Blades are blocked.
• Solution: Check the blades.

Problem: Motor and sensor are not working.

• Possible Cause: Damaged capacitor.
• Solution: Replace the capacitor.

Problem: Oil leakage.

• Possible Cause: Motor damage.
• Solution: Replace the motor.

Problem: Vibration.

• Possible Cause: Internal wiring of the motor is cut or wires are disconnected.
• Solution: Replace the motor.

Problem: Unpleasant odor.

• Possible Cause: Damaged lighting.
• Solution: Replace the light bulb.

Problem: Insufficient air extraction.

• Possible Cause: Improper sealing of the ventilation outlet.
• Solution: Remove the outlet and seal it with adhesive.

Problem: Device is not properly fixed.

• Possible Cause: Motor is not securely fixed.
• Solution: Securely fix the motor.

Problem: Excessive ventilation due to open windows or doors.
Possible Solution: Choose a new location for installing the device or close some doors/windows.

Problem: Light works but the motor does not.Check the fan blades. If damaged, replace the capacitor or motor as needed.Problem: Neither the light nor the motor works.Check the internal wiring of the motor and connections. If the smell of burning is present, replace the motor. Additionally, check the light fixture and tighten any loose power cables according to the wiring diagram.Problem: Oil leakage.
Ensure the inlet and outlet of the ventilation opening are properly sealed. If necessary, retighten or glue the joints.Problem: Vibration.
Check and, if necessary, replace the fan blades. Make sure the motor is securely fastened.Problem: Insufficient air extraction.
Adjust the distance between the hood and the cooking surface. Consider the effect of open windows or doors on ventilation and adjust as needed.Problem: The device is not level.
Adjust the position of the hood to be horizontal and tighten the securing screws.

Introduction

Before first use, please carefully read this instruction manual. The images in this manual are for reference only; the physical version of the product is the guide and is definitive.

Recommendations and Suggestions
This instruction manual applies to several versions of the device. Accordingly, you may find descriptions of functions that do not relate to your specific device.

Product Disposal

Devices that have reached the end of their working life should be collected separately and not mixed with household waste, as this harms the environment and can be detrimental to human and animal health! Such devices can be returned for recycling at the stores where they were purchased or at stores selling similar products. Electronic waste can also be handed over to designated recycling centers. By doing this, you protect the environment, your health, and the health of your compatriots. In case of doubt, contact your local recycling centers. We accept and take full responsibility according to applicable regulations.

Main Parameters

• Nominal voltage and frequency: 220-240 V~ / 50-60 Hz
• Power consumption, motor power: 200 W
• Grease filter rating: KPE 60/A
• Odor filter (optional): KPE 6038C
• Special electrical equipment may be described separately.

Product Parts

1. Handle for selecting circulation
2. Body of the device
3. Grease filter

Mounting Parts

4. Carbon filter (optional)
5. Butterfly damper
6. Cover
7. Screws 5 mm x 49 mm (quantity: 4)
8. Plastic plugs (quantity: 4)

Dimensions
Please refer to the images for the detailed dimensions of the product.

Installation

Choose the type of air circulation: external air exhaust or internal circulation. Refer to the diagram for the handle position for selecting the type of circulation.

Usage Instructions

• Motor switch: Press this switch to stop the motor.
• Speed switch: When pressed, the motor will operate at low speed.
• When pressed again, the motor will operate at medium speed.
• When pressed again, the motor will operate at high speed.
• Light on/off switch: Press this switch to turn the light on and press it again to turn it off.

Lighting
Replacing the light bulb:

• Turn off the device and remove the power plug before any maintenance.
• Remove the grease filter to access the light bulb.
• Disconnect the lamp connector.
• Replace the lamp with a new one of the same type, ensuring it is correctly connected to the lamp connector.
• Turn the power back on.

LED modules with built-in starter unit:

• Maximum power: 1.5 W
• Voltage: 220-240 V
• Rectangular shape: 33.2 mm x 120 mm
• ILCOS code: DBS-1.5-H-33.2/120

Cleaning and Maintenance
Regularly clean the ventilation fans. Do not allow grease to accumulate on the fan or filter.

Butterfly Damper Installation

Hold the butterfly damper by hand, align it with the suction opening as shown in the illustration, insert the damper and turn it until the three clamps of the vent click into place. The installation is complete when the external air deflectors and butterfly damper meet the requirements of standard IEC/EN 60335-1.

FAQ

How do I replace the light bulb in my HURRICANE series hood?

Turn off the device, remove the power plug, remove the grease filter, disconnect the lamp connector, replace the lamp with the correct type, and reconnect the power.

What should I do if my hood's fan blades are blocked?

Check the fan blades for obstruction and remove any debris. Replace parts if necessary.

Can I recycle the carbon filter of my hood?

The carbon filter cannot be recycled and should be replaced approximately every 2-3 months of use.

What are the main parameters of the HURRICANE series hoods?

The nominal voltage and frequency are 220-240 V~ / 50-60 Hz with a motor power of 200 W. The grease filter rating is KPE 60/A and there is an optional odor filter KPE 6038C.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>