MIXX Audio HTG01 StreamBuds Custom 3 True Wireless Earbuds User Guide
- June 15, 2024
- MIXX Audio
Table of Contents
QUICK START GUIDE
HTG01 StreamBuds Custom 3 True Wireless Earbuds
IMPORTANT!
When first taking your earbuds out of the packaging, please remove protective
film covering the charge points.
LET’S STAY CHARGED
Note: If your earbuds and charge case do not have any power when you first unpack them, place the earbuds into the charge case and plug the charge case into a USB port using the USB C cable [8] provided.
The Earbuds
A voice prompt “Battery low” allows for 2 minutes play time before the
earbud(s) powers down stating “Battery low, power off”. The Earbuds LED Light
[2] will flash WHITE once and will then switch off.
Charge the earbuds using the Portable Charging Case [5] .
While charging, each Earbud LED Light [2] will be WHITE and once fully charged
the LED Lights will turn off. Secure the earbuds by closing the lid.
When the earbuds are placed inside the case and the lid is closed, the charge
indicator light (7) will turn WHITE for 4 seconds to indicate charging and
then turn off.
The Portable Charging Case
Always connect the case via the USB C port [6] , to a suitable USB wall
charger, computer USB port or a power bank using the USB C charging cable (8)
supplied. Plug the supplied cable into the USB C port [6] on the charge case.
The charge light indicator (7) will blink RED, on and off, to show the case is
charging.
TIP: 15 MINUTE QUICK CHARGE
If you’re running low on power, charge your earbuds in the case for 15 minutes
and get 2 hours extra play time while on the go
LET’S CONNECT
First time pairing
When you open the Portable Charging Case [4] both earbuds will turn on and
connect together. A voice prompt will confirm with ‘Power on, pairing’. One
Earbud LED Light [2] will flash WHITE to indicate pairing mode.
Go to the Bluetooth settings on your audio device to select ‘MIXX StreamBuds
Custom’ from the list. Once paired successfully you will hear ‘Connected’ and
the Earbud LED Lights [2] will turn off.
You can now enjoy your music, watch a video or take a call hands free. The
earbuds will automatically reconnect to the last device they were paired with,
confirming ‘Connected’.
FACTORY RESET
When in pairing mode, independently ‘tap’ 4 times until power off is
announced, return bud to case. repeat with other bud. This will complete the
Factory Reset process.
LET’S PLAY
Power on
Remove both earbuds from the case. They will automatically turn on and dual
pair together. A voice prompt will state “Connected” as confirmation. To
manually turn on, long press each Touch Sensor [1] and [3] for 3 seconds.
Power off
Place both earbuds in the case. This will automatically turn off the earbuds
and the Bluetooth.
Play / Pause
Tap and hold either Touch Sensor [1] or [3] Increase Volume
Single tap RIGHT Touch Sensor [3] Decrease Volume
Single tap LEFT Touch Sensor [1] Previous Track
Double tap LEFT Touch Sensor [1] Skip Track
Double tap RIGHT Touch Sensor [3] Answer / End Call
Tap and hold either Touch Sensor [1] or [3] (Audio is picked up via the
microphones [4] .)
You can customise your earbuds using the MIXX control app, see page 4 for
further details
LET’S ASK GOOGLE ASSISTANT / SIRI
To activate Siri or Google Assistant, please use the MIXX Control app.
Your Voice Assist familiar ‘Beep’ will sound to confirm connection.
You can now ask Siri or Google Assistant a question or state a command.
LET’S INSTALL THE APP
Scan the QR code here to download the free MIXX Control app
Follow the on-screen instructions to create an account
Follow the on-screen instructions to connect to your earphones
HOW TO CUSTOMISE YOUR EARBUDS USING THE APP
Scan the QR code here to view our online tutorials (https://bit.ly/3sN4fGd), for instructions on how to customise your earbud settings.
LET’S BE SAFE
IT IS IMPORTANT THAT YOU PLEASE READ THIS SECTION COMPLETELY.
For your protection
Check with your doctor before use if you are fitted with a medical device such
as a pacemaker or a programmable shunt.
Ensure the product is correctly connected using the manufacturer’soriginal
accessories included with the product.
Do NOT make unauthorized alterations to this product.
Product may contain small parts which can be a choking hazard.
Please keep the product out of reachfrom children under 6 and animals.
Whilst this product has been made using hypo-allergenic materials, youmay
suffer some skin irritation afterprolonged use.
Do NOT listen to loud music for a long duration of time. We recommend turning
the volume down before placing the device in your ears to avoid hearing
damage.
Do NOT use the product while operating machinery, including cars,trucks or
other vehicles.
Do NOT use noise cancelling mode or use your device in areas where the use of
hearing is required for safety. e.g., while riding a bicycle, ata construction
site or railroad etc.
Clean only with a dry cloth – Wipe off sweat from the earbuds and the charging
case before charging.
IMPORTANT!
Do NOT use a non-certified PD or QC3 wall charger as this may damage the
product. Only use the cable supplied to charge your device.
If your product has become damaged in any way, does not operate normally or
has been dropped, please refer to a qualified person to have the product
checked before continuing to use it.
WARNING:
This product contains a Lithium battery. Incorrect disposal of this battery
may result in an explosion.
The operating temperature range for this product is 5º – 40º celsius.
Please avoid exposing the product, charging case and cable connectors to
prolonged rain, moisture, or liquid spills/splashing.
Please remove your device from your ears immediately if they emit any loud
unusual noise or you experience a warming sensation.
If you experience any of the issues listed above, please turn off your device
and contact MIXX Ltd on [email protected]
LET’S RECYCLE
**** This product can be recycled. Products bearing this symbol must NOT be
thrown away with normal household waste.
Take the product to a collection point designated for recycling of electronic
devices. Find out more about return and collection points through your local
authority.