eta 3568 Vintero Air Cooler Instruction Manual

Air cooler • INSTRUCTIONS FOR USE
Vintero

3568 Vintero Air Cooler

Zone 0 = Internal space for a bathtub or a shower unit

Dear customer, thank you for buying our product. Before putting the appliance into operation, read carefully these instructions for use and store this manual properly together ith the certificate of warranty, a cash voucher, and possibly with the package and the internal contents of the package. The appliance is designed for moderate climates.

SAFETY WARNING

GENERAL PROVISIONS:

• Consider the instructions for use as a part of the appliance and pass them on to any other user of the appliance.

• Check whether the data on the type label corresponds with the voltage in your socket.
  The power cord plug may only be connected to the electrical socket complying with the applicable standards.

• This appliance may only be used by children aged 8 years or older, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• Before exchanging any accessories or accessible parts that are moving during use, before assembly and disassembly, before cleaning and maintenance (eg. when removing the protective cover) filling the container with water, or after finishing the work, switch off the appliance and disconnect it from mains by unplugging the power cord plug from the electrical socket!

• Before removing the cover it is important to disconnect the power cable plug from the mains! Any person getting into contact with the appliance must clearly see that the appliance is disconnected from the mains due to maintenance. The plug must be in a visible place!

• Observe optimal air humidity in the room. Too high humidity may support the growth of unfavorable biological organisms and fungi.

• Never leave water in the container if you don’t use the appliance.
  Clean the water container and dry it before each storage of the appliance. Clean the appliance before the next use.

• WARNING: Microorganisms that may be present in water or in the environment, in which the appliance is used or stored, can breed in the water container and in case of their dispersion in the air can cause serious health risks, unless the water is being changed and the container is regularly cleaned every 3 days.

• If you use the appliance daily, be particular about regular cleaning the container at least once every 3 days. Remove possible deposits and scale.

• ATTENTION: Do not use this heater in series with an external timer, remote controller, or any other device that switches on the appliance automatically, since a fire risk exists when the heater is accidentally covered or displaced at the moment it switches on.

• The appliance must not be immersed in water or other liquids (even partially) and it must not be used in close proximity to bathtubs, showers, washbasins, or other water containers, including a swimming pool. If the ventilator falls into the water, do not take it out! First of all, unplug the power cord from the socket and only then take out the fan. In this case, take the appliance to a special service to check its safety and proper function.

• Do not plug the power cord in the electrical socket and do not unplug it with wet hands or by pulling the power cord!

• Never put fingers or other objects into the inlet and outlet holes of the fan.

• WARNING: There is a risk of injury in case of incorrect use (not in accordance with the manual) of the appliance.

• Only use this appliance for the purpose it was designed for, as specified in this manual.
  Never use the appliance for any other purpose.

• The manufacturer assumes no responsibility for any damage caused by improper handling of the appliance and its accessories (e.g. electric shock, fire), and the appliance guarantee will become void if any of the aforementioned safety instructions are not observed.

USE OF THE APPLIANCE:

• The appliance must not be immersed in water or other liquids (not even partially)! If the appliance falls in the water, do not take it from the water! First, disconnect the power cord plug from the electrical socket, and then take out the appliance from the water. In such cases, bring the appliance to a specialized service center to verify its safety and proper operability

• Do not place any objects on the top of the appliance.

• This appliance is not intended for outdoor use.

• The appliance cannot be used in bathrooms in zones 0, 1, and 2 (fig.4)! It must not be used in close proximity of bathtubs, a shower or a swimming pool.

• The appliance must not be used in a damp or wet environment and in any environment with the danger of fire or explosion (premises where chemicals, fuels, oils, gases, paints, and other flammable or volatile materials are stored).

• Only use the appliance in the working position at places with no risk of overturning and in a sufficient distance from other objects (such as curtains, drapes, etc.), heat sources (e.g. fireplace, heater, stove, cooker, radiators, hot air ovens, grills) and wet surfaces (e. g. sinks, wash basins)

• For the purpose of stability, the appliance must be placed on a flat and hard surface. It should not stand on soft material.

• Only fill the removable tank with clear water without any other substances (for example aromatic oils) between MIN and MAX levels (even if you are pouring water into the upper tank). In order not to damage the pump, do not pour water warmer than 35 °C.

• Once the tank is full, do not move the appliance to avoid the risk of water spilling inside the appliance. Do not turn or rotate the appliance if any volume of water is in the tank! If you turn the appliance and water gets inside, do not use the appliance and have it checked in a service center!

• Empty the water tank after every use, and store the appliance without any water inside!

• Do not place the appliance below/near the electrical socket and other electric
  If impurities are sucked and settle inside the appliance, clean it (see article V. MAINTENANCE).

• When handling the appliance, avoid causing any injury.

• Do not place any device with an open flame in the air flow coming out from the appliance because of the danger of burning process interruption.

• Never expose yourself (or animals) to the airflow for an extended period of time. It may cause health problems.

• Only use original components designed for this type.

• Holes for air ventilation must not be covered.

POWER CORD:

• Never use the appliance if the power cord or power plug is damaged, if the appliance is not correctly operating or if it has fallen on the floor and been damaged, or if it has fallen into the water.
  In such cases take the appliance to a professional service center to verify its safety and correct function.

• If the power cord of the appliance is corrupted, it has to be replaced by the manufacturer, its service technician or a similarly qualified person so as to prevent dangerous situations.

• Never put the power cord on hot surfaces and never let it hang over the table edge or worktop edge. If the cord is caught or pulled, e.g. by children, the appliance may overturn and fall down, causing a serious injury!

• The power cord must not be damaged by sharp or hot objects, or open fire, it must not be sunk into water or bent over sharp edges.

• If you need to use an extension cord for justified reasons, it must be undamaged and comply with the applicable standards.

DESCRIPTION OF THE APPLIANCE (Fig. 1)

button
 A6 – Groove of running water|  B6 – Blowing speed setup button
 A7 – Down-flowing water hole|  B7 – Cooling button
 A8 – Pump (item No. ETA356800050)|  B8 – remote control signal receiver
 A9 – Pump arresting locks|  B9 – Blowing speed setting icon
 A10 – Cooling pad (item No. ETA356800060)|  B10 – Activated cooling icon
 A11 – Pad cover|  B11 – Activated blades oscillation icon
 A12 – Water discharge holes|  B12 – Timer icons
 A13 – Arresting lock cover|  B13 – On/off icon
 A14 – Cover fixing screws|  B14 – Normal mode icon
 A15 – Power cable|  B15 – Natural mode icon
 A16 – tank cover|  B16 – Sleep mode icon
 A17 – upper water tank

C – Remote control unit (ETA356800110)
C1 – On/off button (C1=B1)
C2 – Blowing mode button (C2=B2)
C3 – Light button (C3=B3)
C4 – Timer button (C4=B4)
C5 – Inner blades oscillation button (C5=B5)
C6 – Blowing speed setup button (C6=B6)
C7 – Cooling button (C7=B7)
D – Cooling box (200 ml)
E – Tightening spanner

PREPARATION FOR USE

Remove all the packing material and take out the appliance. Remove all possible adhesion foils, and stick–them on labels, or paper from the appliance. Place the appliance on a  suitable flat and dry surface. Leave free space for due ventilation. Vents in the appliance ensure air circulation during ventilation and they must not be covered or blocked in another way. Make sure that the power cord is not damaged and that it does not lead to any sharp or hot surfaces. The electric socket must be easily accessible so that the appliance can be easily disconnected from the power supply if danger appears. Plug the power cord connector into an electric socket. Moderate smoke for a short time does not mean any defect. Now the appliance is ready for operation.
To fill the water, take out the water tank and pour clear water inside, at the level between MIN and MAX marks. You can also use upper container A17. For the maximum cooling effect, we recommend using cold water. For the best results use cooling boxes D inserted in the tank (A5 or A17), after having been sufficiently cooled down in your freezer. You may also add ice cubes in the water. This will help keep the water in the tank cold for a longer time.
INSTALLATION OF WHEELS
The product includes 4 wheels A4 and a tightening spanner E to fix the wheels to the cooler body A. Please proceed according to Fig. 3. Two wheels have arresting locks
(wheels A, Fig. 3) used to secure the appliance against unwanted moves. For better stability, we recommend installing the wheels in a cross shape according to Fig. 3.
Cooling boxes preparation
Cooling boxes are delivered and filled with powdery material. It is necessary to fill the box with water (preferably distilled water, if need be boiled water) up to the watermark placed on the box. Afterward, screw in the box properly.

INSTRUCTIONS FOR USE

Once connected to the mains, the appliance will switch to standby mode. „ “ symbol will display at the same time. To start the appliance, press the switch on/off button B1

• air blowing will be activated in the normal mode at medium speed, and the respective icons will appear on the display. Now you can change the mode and functions by the
  respective buttons

• see below. To terminate any function and to switch off the appliance, press repeatedly presses the switch on/off button B1.

BLOWING MODE
3 different air-blowing modes are available. Normal, natural and sleep modes. The mode is selected by pressing the B2 button. It is possible to switch modes within both functions (cooling and fan).
A) Regular mode ( ) depends on the manual setting of the blowing speed, which is maintained the same.
B) Natural mode ( ) tries to imitate air circulation in nature. Therefore it alternately switches on and off the ventilation depending on the speed setting, while changing the blowing speed. The blowing intensity is changed as follows when the respective blowing speed is set up:
Low speed

Medium speed

High speed

C) Sleep mode ( )
This mode is identical in many aspects to the natural mode. The main difference is that after the expiration of 1 hour, the speed setup is decreased to the lowest level. This means that if you set the high speed in the sleep mode, the appliance shall switch to the medium-speed mode after 30 minutes, and to the low-speed mode after 30 minutes. If you start with the medium-speed setting, the appliance shall switch to the low-speed mode after the respective period. The low-speed mode is then on without any change in the blowing frequency and intensity.
BLOWING SPEED
3 air-blowing speeds are available (low – medium – high ) to be selected during the cooling or ventilation modes by pressing the B6 button. The respective setting is indicated on
display by the respective icon B9.
FUNCTIONS
The appliance has two basic functions with various properties:
a) Cooling function
To cool down the air, press the cooling button B7. The activated function is indicated by the B10 icon. With this function, the A8 pump is active, pumping the water from the tank to the cooling pad A10. Switch off the function by pressing the B7 button again (the B10 icon will disappear), and switch the appliance to a standard fan function.
b) Fan function
This is a standard ventilation function without the activated pump and with no need to have water inside the A5 tank. This is the default function when the appliance is switched on. It is only indicated by the switched on/off icon B1, and by the respective icons of speed and blowing mode setting.

Notes and recommendations

• If you want to activate the cooling functions, water must be present in the A5 tank.
  Regularly monitor the water level so as it will not drop below the MIN level mark.
  Do not have the appliance without any water when the pump is switched on!

• If you are going not to use the appliance for a long time, we recommend activating the 3 b) fan function at the high speed for at least 20 minutes before switching it off. This will completely dry the internal components of the appliance.

OSCILLATION
By pressing the B5 button, you activate the oscillation of internal blades A2. The function is indicated by the icon B11. Outer blades A1 must be set up manually.
BACKLIGHT
You turn off all pilot lights by pressing the B3 button. By pressing the B3 button again, you turn on the pilot lights signalizing the setting of an appliance.
TIMER
With the B4 timer button, you may set up switching the appliance off after 7.5 hours at maximum. Each press of the button will set up the timer as follows:
0,5 H – 1H – 1,5 H – 2H – 2,5H – 3H – 3,5H – 4H – 4,5 H – 5H – 5,5 H – 6H – 6,5 H – 7H – 7,5 H – timer off – 0,5 H – 1H – 1,5 H…
Remote control

• Remote control unit C may also be used to switch between modes and functions. The appliance response is the same as when controlled by buttons on control panel B.
• Aim the remote control unit at the front side of the control panel B.
• Proceed according to Fig. 2 to replace the battery (CR2025).
• If you are not going to use the appliance for a longer period of time, take out the batteries.
• Keep the battery out of reach of children and incapacitated people. A person, who would swallow the battery, must seek medical help immediately.
• If the battery is leaking, take them out immediately, otherwise, it may damage the appliance.

MAINTENANCE

Wipe the individual parts of the appliance’s outer casing, including the control panel with a damp cloth or sponge. Prevent water from spilling inside the appliance or control panel.
Do not use any aggressive or abrasive cleaning agents. Pad cover and cooling pad
Do not remove the rear cover of the A11 pad during normal operation. Remove it only if you are going to replace the cooling pad A10 (its service life is up to 3 years under normal operation), or to make complete maintenance after the respective period of time.
Unscrew two A14 screws to dismount the cover. Then remove the cooling pad according to Fig. 1. Clean the cover and the pad by a fine brush and water with a neutral cleaning agent added, then rinse in clear water and let dry. Wipe the internal parts of the appliance under the cover with a damp cloth only. Assemble both parts using the reverse procedure, and put them back inside the appliance.
Warning

• Once the cover is reinstalled, do not forget to properly fix it by tightening the screws A14.
• Never insert any items or fingers in the internal section under the cover (behind the plastic grid)! Also, pay increased attention when handling water while the cover is removed.

Water tank
The tank may be cleaned for example with a fine brush and cloth after taking the tank out from the cooler body, or you may remove it completely and perform thorough maintenance. However to do so, you have to release the A9 pump arresting lock according to Fig. 1. To avoid pinching the pump hose and cable, lead them through the cut hole
according to the detail of Fig. 1. Clean an upper water tank using wet tissue or a soft

ENVIRONMENT

If the dimensions allow, there are marks of materials used for the production of packing, components, and accessories as well as their recycling on all parts. The symbols specified on the product or in the accompanying documentation mean that the used electrical or electronic products must not be disposed of together with municipal waste. For proper disposal, hand them over at the special collection places where they will be accepted free of charge. Suitable disposal of the product can help to maintain valuable natural resources and to prevent possible negative impacts on the environment and human health, which could be the possible consequences of improper waste disposal. Ask for more details at the local authority or at a collection site. Fines can be imposed for improper disposal of this type of waste in agreement with the national regulations. If the appliance is to be put out of operation, after disconnecting it from the power supply we recommend its cutoff, and in this way it will not be possible to use the appliance again. Remove a discharged battery and dispose of it in a suitable and safe way through the special collection networks. Never dispose of the battery by burning it!

TECHNICAL DATA

The manufacturer reserves the right to change the technical specifications and accessories for the respective models.
WARNINGS AND SYMBOLS USED ON THE APPLIANCE, PACKAGING OR IN THE INSTRUCTIONS MANUAL:
DO NOT COVER. HOUSEHOLD USE ONLY. CAUTION: BE CAREFUL OF STEAM.
DO NOT IMMERSE IN WATER OR OTHER LIQUIDS.
TO AVOID THE DANGER OF SUFFOCATION, KEEP THIS PLASTIC
BAG AWAY FROM BABIES AND CHILDREN. DO NOT USE THIS
BAG IN CRIBS, BEDS, CARRIAGES, OR PLAYPENS. THIS BAG IS NOT A TOY.

DO NOT EAT
OPEN, PUSH, RELEASE
– Clean the water reservoir once every three days.

References

• AEG Hausgeräte | Setzen Sie auf Qualität | AEG
• ETA - tady je doma
• ETA - tu je doma

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>