Highyes A10 Electric Spin Scrubber for Cleaning Bathroom User Manual

Highyes A10 Electric Spin Scrubber for Cleaning Bathroom

Product Information

Specifications

• Model: A10
• Product: Electric Spin Scrubber 7 in 1
• Website: www.highyes.shop
• Email: support@highyes.shop

Product Structure
The Electric Spin Scrubber 7 in 1 (Model: A10) includes various components:

1. Big brush
2. Small brush
3. Sharp brush
4. Brush head holder
5. Imitation wool brush
6. Sponge brush
7. Fiber brush
8. Cloth brush
9. Telescopic rod
10. Charging cable

Function Introduction
The Electric Spin Scrubber offers the following features:

1. Connect Head: Buckle structure design for interchangeability of brush heads.
2. Power button: Long press for 2 seconds to turn on/off the machine. Short press to switch between high and low speed.
3. TYPE-C charging port: Supports 5V/1A charging with soft rubber waterproof protection.
4. Power display: Indicates battery level with 5 bars for 100%, 4 bars for 80%, and so on.

Charging Guide
To charge the Electric Spin Scrubber:

• Use a 5V/1A or higher adapter.
• When charging, the 5-bar light flashes until fully charged.
• The indicator light will stay on for 5 minutes after a full charge.
• Note: Do not use the product while charging.

Brush Head Assembly Method

1. Turn off the machine before replacing the brush head.
2. Gently pull out the brush head vertically.
3. Snap the new brush head into place on the connecting bracket.
4. Install all 4 pieces on the magic sticky base for use.

Handle Assembly Method

1. Attach the rod with the threaded end to the machine head.
2. Tighten the two pole sections as shown.
3. Adjust the extension rod length as needed.
4. Secure the extension rod by locking it in place.

Purpose of Accessories

• Sharp brush: For corners, seams, car wheels, and hard-to-reach areas.
• Small flat brush: Ideal for cleaning small flat surfaces like sinks and furniture.
• Big flat brush: Suitable for various cleaning tasks in different rooms.
• Towed cloth: Designed for floor, glass, and car surface cleaning.
• Fiber brush: Useful for tough-to-clean areas like kitchen surfaces.
• Imitation wool brush: Recommended for polishing and decontaminating surfaces.

Frequently Asked Questions (FAQ)

• Q: Can I use the Electric Spin Scrubber in water?
  A: No, the product is not designed to be submerged in water. Avoid using it in wet conditions to prevent damage.

• Q: How do I clean the brush heads?
  A: To clean the brush heads, detach them from the scrubber and wash them with mild soap and water. Ensure they are completely dry before reattaching them.

Please read this manual before use.

Product Structure

1. Big brush
2. Small brush
3. Sharp brush
4. Brush head holder
5. Imitation wool brush
6. Sponge brush
7. Fiber brush
8. Cloth brush
9. Telescopic rod
10. Charging cable
11. Main body
12. Hook up
13. Manual

Function Is Introduced

Products utilize high-performance lithium batteries and a 390−strong magneto, featuring two speeds. They come equipped with seven brush heads for convenient replacement based on various needs. The devices support USB charging through an international standard TYPE-C charging line, providing a quick 3−hour charge. The circuit design includes charge and discharge protection functions, blocking protection, low power reminders, charging instructions, and a five- section LED power display. Additionally, the product conforms to safety certification and environmental standards applicable in all countries worldwide, ensuring a reliable and eco-friendly experience.

Features

• Connect Head
  Buckle structure design allows the interchange of different brush heads.

• Power button
  Long press for 2S to turn on/off the machine (default is high speed when starting up)/short press to switch to high/low speed.

• TYPE-C charging port
  Supports 5V/1A charging (soft rubber waterproof protection).

• Power display

  • 5 bars light up to indicate 100% power
  • 4 bars light up to indicate 80% power
  • 3 bars light up to indicate 60% power
  • 2 bars light up to indicate 40% power
  • 1 bar indicates 20% battery (low battery, charge in time)

Charging Guide

• As shown in the picture, the last battery bar flashes when the battery is low.
• Please use a 5V/1A or above adapter to charge. When charging, the 5−bar light flashes like a horse race. After being fully charged, the indicator light will light for 5 minutes and then turn off.

NOTE:
This product does not support use while being charged.

Brush Head Assembly Method

1. When replacing the brush head, please turn off the machine.
2. Gently swing the brush head and pull it out vertically.
3. The groove of the brush head corresponds to the convex groove of the connecting bracket and snaps in vertically.
4. 4 pieces need to be installed on the magic sticky base to use.

Handle Assembly Method

1. The rod with the threaded end is rotated and tightened with the machine head.
2. Rotate and tighten the two pole sections as shown in the picture.
3. Rotate the indicator arrow to align with “ON” to unlock, and adjust the extension rod to the length you need.
4. Rotate the indicator arrow to align with “OFF” to lock and secure the extension rod.

Purpose of Accessories

Sharp brush:
Suitable for the corners, seams, and car wheels of a home kitchen, bathroom, or fume machine, as well as for cleaning areas that are not easily accessible.

Small flat brush head:
Suitable for cleaning small flat areas such as hand wash basin, kitchen sink, furniture, etc.

Big flat brush head:
Suitable for cleaning oil and dirt in bathroom, kitchen, living room, toilet, window, glass etc.

Towed cloth:
Mainly suitable for living room floor, glass, tea table, car surface cleaning, polishing, and other purposes.

Fiber brush:
Mainly used in kitchens, stoves, range hoods, and other places that are particularly difficult to clear.

Imitation wool brush:
Mainly used for polishing, waxing, or decontamination of high-grade households. electrical appliances and automobile surfaces.

Sponge brush:
Mainly used for washing car paint surfaces, glass, etc., without causing surface scratches.

Wall-mounted Usage

1. Stick the hook on the wall.
2. Squeeze the pole into position from the front.

Warning

• Please check the accessories carefully before use.

• Do not place the charger in wet conditions.

• Make sure the charging hole is sealed when cleaning.

• Dry the surface in time after cleaning to ensure the product is dry.

• This product must not be used by individuals (including children)
  who are not physically, mentally, or emotionally capable or lack the relevant experience and knowledge, unless there are responsible persons supervising or directing their use of the product. Children should be supervised to ensure that they do not play with these products.

• Do not use hot water when cleaning to avoid the risk of being scalded.

• Please make sure to use the standard charger for this product.

• Do not touch the rotating parts with your hands when it’s working.

Cleaning and Maintenance

• Please check if the charging port is covered when cleaning.

• Do not use metal such as steel wire abrasive cleaner or corrosive liquid (e.g. gasoline or acetone) to clean brush heads and fuselage surfaces.

• You can wash the brush under the tap or use the machine.
  Please note: The main body of the spin scrubber can not be immersed in water.

• After the cleaning is finished, it is necessary to shake off the moisture from the product and wipe it with a dry cloth.

Product Parameters

• Product name: Electric Spin Scrubber
• Product model: A10
• Gear speed: 420R/min/330R/min
• Decibel value: ≤70DB
• Input voltage: 5V/1A
• Battery capacity: 2500mAh
• Battery life: 80min at high speed, 100min at low speed
• Charging time: About 180 minutes
• Waterproof level: IPX7

FCC Statement

Any changes or modifications not expressly. Approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

WEEE Compliance

• Correct Disposal of This Product (Waste Electrical & Electronic Equipment)(Applicable in countries with separate collection systems)
• This marking on the product, accessories, or literature indicates that the product and its electronic ture indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life.
• To prevent possible harm to the environment or human, health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
• Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling.
• Business users should contact their supplier and check the terms and conditions of the purchase contract.
• This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

Scan the QR code for more details

• www.highyes.shop

• support@highyes.shop.

• Manufacturer: Dongguan Yipin Cheng Technology Co., Ltd.

• Address: Building C, 4th Floor, Donghui Industrial, Wulian Keyan Second Road, Fenggang Town, Dongguan City.

Made in China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>