ISDT B80 Smart Charger User Manual
- May 15, 2024
- iSDT
Table of Contents
ISDT B80 Smart Charger
Specifications:
- Input Voltage : AC 100~240V
- Output Current : 1.0~40.0A (Max)
- Output Voltage : DC 20~80V
- Charge Power : 3000W (@220V AC)
- Discharge Power : 1500W (@110V AC)
- Supported Battery Types : LiFe (8~22S), LiPo (6~18S), LiHv (6~18S), ULiHv (6~18S)
- Supported Battery Voltages: LiFe – 3.20V to 3.65V, LiPo – 3.70V to 4.20V, LiHv – 3.80V to 4.35V, ULiHv – 3.85V to 4.45V
- Weight : 3973g
Product Usage Instructions
Safety Precautions:
Before using the ISDT B80 smart charger, make sure to read and understand the safety instructions provided in the user manual.
Connecting the Battery:
Ensure that the battery voltage falls within the supported range specified for the charger before connecting it to the ISDT B80.
Charging Process:
Connect the battery to the charger following the correct polarity and ensure a stable power supply. Set the desired charging parameters such as current and voltage according to the battery type.
Discharging Process:
If discharging is required, connect the battery to the discharge port of the charger and set the discharge parameters accordingly.
FAQ
- Q: Where can I find more information about the ISDT B80?
- A : You can visit the official ISDT website at www.isdt.co for detailed information about the B80 smart charger and compatible accessories.
- Q: What should I do if the actual operation differs from the user manual?
- A : If you encounter any discrepancies between the user manual and the actual operation of the product, it is recommended to refer to the device’s actual functions for accurate usage.
Thank you for purchasing the ISDT B80 smart charger.
Visit ISDT’s official site www.isdt.co for more details about B80 and matching accessories. Since the product is constantly updating, this manual may differ from the actual operation. Please refer to the actual function.
Warnings and Safety
To ensure the charging safety while offering a better use experience, we insist that you should read these terms through before using the product.
- Never use the charger without supervision. When a malfunction occurs, stop operation immediately and refer to this manual.
- Make sure that the charger stays away from dust, dampness, rain and heat. Avoid direct sunlight and vigorous impact.
- Make sure that the charger is always on the heat-resistant, non-flammable and insulating surfaces. Do not use it on places like car seats or catpet. Keep inflammable and explosive objects away from the operation areas.
- Make sure that you fully understand the features and properties of the battery you charge, and set the porper charging parameters before operating. Setting the parameters incorrectly may result in damage to the product, even cause catastrophic consequences such as fire, explosion, etc.
Before connecting the battery, please ensure that the battery voltage is in
the rang of the working voltage of this product. During the working process,
please ensure that the number of battery cells selected is the same as that of
the battery connected.
WARNING!
FIRE HAZARD!
Only operate this device in a cool and ventilated area away from flammable
objects.
This product may emit heat during use, so do not let children operate it.
Disconnect and remove the battery as soon as possible after use.
Specifications
- Model ： B80
- Input voltage ： AC 100~240V
- Output voltage ： DC 20~80V
- Max. input current ： AC 16A
- Max. charging power ：3000W (@220V AC)
- 1500W (@110V AC)
- 1400W (@100V AC)
- Max. discharging power ：200W
- Supported battery types and cell count ： LiFe (8~22S), LiPo (6~18S),
- LiHv (6~18S), ULiHv (6~18S)
Preset Battery Type of Charger and Task Parameters
How to Confirm Charge Current
- Make sure to know the maximum charging current of the battery before charging, never use excessive current to charge to damage your battery, which will result in overheat and even explosions during the charging process. The charging and discharging capacity of the battery is usually marked with C value.
- Multiplying the charging C value and battery capacity equals to the maximum charging current supported by the battery.
- For example, for a 1000 mAh battery with a charging capacity of 5C, the maximum charging current would be 1000*5=5000mA; therefore, the maximum charging current is 5A.
- For a lithium battery, if it is impossible to confirm the supported charging C value, please set the charging current below 1C, for the sake of its (lithium battery) safety.
- The reference relation between C value and charging time : charging time ≥60 minutes/ charging C value (e.g. it needs around 60-70 minutes to complete charging with 1C).
- Due to differences in battery conversion efficiency, the time to complete the charging might be extended.
Task settings
Connect the charger to the power supply, and it will automatically turn on. Then connect the battery, press the setting button to enter the task setting menu, After setting the parameters, press the task start/stop button to get it to work.
The task setting menu as follows:
Charge
The charging current setting range is 1.0~40A (Max). For lithium batteries, it is strongly recommended to connect them with the balance port for balance charging, which ensures the charger accurately monitor the voltage of each cell and balance the inconsistent ones. When charging in unbalance mode (without balance port connection), the charger will indicate an alarm prompt before starting the task.
Discharge
The discharge current setting range is 0.5A~5.0A.
Display of task parameters
Top to bottom and left to right: Task mode, Battery type and cells, Battery cell voltage, Total battery voltage, Charged capacity, Output current, Working time.
Download and Install APP
- Download from the official website : Login to the official website www.isdt.co with your mobile devices, download and install in the “Support – Software” interface;
- Download by scanning code : You could use your mobile device to directly scan the QR code corresponding to the last page, then download and install it according to the prompts.
- Click “+” on the upper right corner of APP surface, then follow the directions to add the device to get started.
*All product photos, statements and literature are for reference only. For up-to-date information, please visit our official web www.isdt.co
SHENZHEN ISD TECHNOLOGY CO. LTD
ISDT reserves the right of final explanation and revision for the terms.