Aptiv Connection Systems Korea LLC 35703751 Wireless Charging System User Manual

Wireless charging system

1. Description

Wireless Power Charger System

It is electromagnetic induction wireless charging system. Wireless power charger transmits 10W power to mobile. Qi (WPC) certified cell phone, which is a standard for wireless charging, or a case dedicated to wireless charging, can be used this system.

※ Reference

• Qi : One of the wireless charging standards
• WPC : Abbreviation of Wireless Power Consortium
• Electromagnetic induction : When an electric current is sent through a coil (a wound-up cable), it creates a magnetic field whose action generates another electric current in a second coil

2. Product features

1. Wireless charging for automobile
2. Support high speed wireless charging (10W)
3. Support coil cooling function by FAN
4. Support FOD(Foreign object detection)function
5. Support wireless charging system protection function
   (Over voltage, Over current, Over temperature prevention)
6. Apply Qi 1.3 ver

3. Operating band

1. Wireless Charging : 127.7Khz (±0.5Khz)

4. Connector pin description

CONNECTOR PIN ARRANGEMENT

PIN #

| Description
---|---
1|

Ground

2

| Ground
3|

PWM LED AMBER OUT

4

| PWM LED GREEN OUT
5|

B-CAN LOW

6

| B-CAN HIGH
7|

Not connected

8

| Not connected
9|

Not connected

10

| Not connected
11|

IGN +

12

|

BAT +

5. How to use

1. Input IGN+, BAT+ power to Wireless charger by #11, #12 pin on connector.
2. Put mobile which support wireless charging on the wireless charger
3. Check wireless charging connection.

6. Product picture

7. Product organization

1. PAD
2. TOP COVER
3. COIL ASSEMBLY (MP-A13)
4. COIL SPACER
5. PCB ASSEMBLY
6. SCREW
7. FAN
8. HOUSING
9. LABEL

8. Matching parts

Front console or Center console in automobile

1. WPC

9. Certification statement

• FCC

RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must follow the specific operating instructions for satisfying RF exposure compliance.

“This equipment should be installed and operated with minimum distance 15cm between the radiator & your body.”

• ISED statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

ISED RF Radiation Exposure Statement:

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must follow the specific operating instructions for satisfying RF exposure compliance.

• CE statement

Hereby, Aptiv Korea LLC declares that the radio equipment type Single Coil WPC Type 2 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://drive.google.com/drive/folders/1GcWrd7BkaazbTcml9m4hbKFI4G4Fr8_S?usp=sharing

127.7 Khz
(±0.5Khz)| 10W ±1W

NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

Types of vehicles equipped

1. HYUNDAI : NX4 PE
2. GENESIS : JK PE

• KC statement

Documents / Resources

| Aptiv Connection Systems Korea LLC 35703751 Wireless Charging System [pdf] User Manual
35703751 Wireless Charging System, 35703751, Wireless Charging System, Charging System
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>