Comnav Technology R550 Data Collector User Manual
- June 5, 2024
- Comnav Technology
Table of Contents
Comnav Technology R550 Data Collector User Manual
This manual is for reference only.
There might be subtle differences between actual product and picture.
Please refer to actual product.
Please read this manual before using product.
Product Overview
Installation of SIM card and SD Card
Please mind card-gap direction before insert sim card and SD card. This is a dual sim cards device, only 1 CDMA2000 SIM card is valid at same time.
Restart Device
Holding power button 2 seconds, choose restart
Force Device Restart
Holding power button over 8 seconds
Charge
Charging device before first use is recommended
Note: The charger plugs should be fully plugged into socket and keep in easy-to-unplug location
Safety Information !
Devices designed for working in -20 C C environment, proper storage
temperature is -30 C C, lower or higher temperature would compromise device
performance, even cause potential damage to device or battery Charge device in
environment, n case of battery endurance weakness. No support or
responsibility will be undertaken if end user update device with third party
ROM or crack device system
Electromagnetic Radiation
The maximum absorption rate of electromagnetic radiation is (SAR) 2.0 W/kg. In
special cases such as pacemakers, hearing aids, cochlear implants, users
should follow the doctor’s instructions.
Warning:
Following action may cause battery safety risks, resulting safety problems:
- Disassembly battery.
- Demolition device.
- Repair device in unofficial service.
- Using uncertified USB cable.
- Put device into or near microwave oven, fire, or other heat source.
Product Specification
Environmental Protection
List of toxic and hazardous substances or elements.
O: indicates that the toxic and hazardous substances in all homogenized materials of the component are below the limit required by GB/T 26572-2011.
X: indicates that the toxic and hazardous substance in at least one homogeneous material of the component exceeds the limit set by GB/T 26572-2011.
Note: this product is labeled “X” because there are no alternative technologies or components available at this stage. Please handle such parts or materials properly to avoid environmental and human health effects.
This product’s “environmental protection life” is 10 years. The environmental protection of some internal or external components may differ from the environmental life of the product. The service life mark on the component has precedence over any conflicting or different environmental life identification on the product. The term of environmental protection of this product refers to the safe life of using the product without toxic and harmful substances leakage under the conditions stipulated in this information guide.
For more information
About the device Android and software versions, check in: settings > about the phone.
Note: Access to the Internet, send and receive information, upload and download, automatic synchronization, so that some applications or use of location services may incur other costs. To avoid additional charges, please contact the service provider and select the appropriate tariff package scheme.
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE：
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept
any interference received, including interference that may cause undesired
operation.
FCC Statement：
This equipment has been tested and found to comply with the limits for a Class
B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure requirement
Warranty Card
Company:
Tel:
Name:
Add:
E-mail:
Product Info:
Technique Support:
Please contact us for development support.
Global support Mail: [email protected]
China Mainland support Mail: [email protected]
After-sale service:
+ 400 1088 019
Read More About This Manual & Download PDF: