MTI Baths 102A Designer Collection Tubs Owner’s Manual

: June 15, 2024
: MTI Baths

Table of Contents

MTI Baths 102A Designer Collection Tubs
Product Information
Product Usage Instructions
Electrical Components & Specifications
IMPORTANT ORDERING & INSTALLATION INFORMATION
Drains & Overflow Kits Must be ordered at time of purchase
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MTI Baths 102A Designer Collection Tubs

Product Information

Specifications

Model: 102A
Dimensions: 59.75 x 42 x 23.75 inches
Installation: Freestanding or Alcove
Capacity: 116 gallons to overflow
Weight: 150 lbs / 68 kg (Freestanding), 169 lbs / 77 kg (Alcove)

Product Usage Instructions

Installation
The product can be installed in various ways:

Freestanding: The tub can be installed as a standalone unit.
Alcove: The tub can be finished on 1, 2, or 3 sides for installation against a wall or in an alcove.

Filling the Tub
Filling the tub to the maximum capacity may require an above-average size or dedicated water heater.

Optional Integral Armrests
The tub allows for optional integral armrests for added comfort.

The Sculpted Finish process does not allow enough space for mounting fixtures on the tub deck. Shown as Air Bath

Electrical Components & Specifications

The tub comes with different hydrotherapy package options:

GFCI/110V Microbubbles: Requires a 15-amp electrical circuit.
Air Massage: Requires a heated blower and a 15-amp electrical circuit.
Microbubbles with Air: Requires a microbubbles pump, heated blower, and a 20-amp electrical circuit.
Air Massage Elite: Requires a heated blower, chromatherapy, and a 15-amp electrical circuit.
Microbubbles with Air Elite: Requires a microbubbles pump, heated blower, chromatherapy, and two 15-amp electrical circuits.

ELECTRICAL COMPONENTS & SPECIFICATIONS

See the Installation & Operation Manual for more details. MTI’s Customer Service: Monday-Friday 8am-6pm EST 800-783-8827 or [email protected]

Options and accessories may be packaged inside the tub crate. Always check packaging before discarding.
All product measurements are +1/2”.
Specifications and configurations are subject to change without notice.
Measurements herein supersede all others published prior to publication date below.

Note: Electrical requirements may change with the addition of optional therapy components. Please refer to specific option details or installation information.

IMPORTANT ORDERING & INSTALLATION INFORMATION

Before ordering or installing, please consider future access to equipment.
Unless ordering Sculpted Finish on 4 sides, please include a diagram specifying which sides will need to be finished, along with location of optional tile flange(s).
Overflow is factory installed for provided toe tap drain.
When ordering an air bath, the air blower must be remote mounted.
Microbubbles system components must be installed on a non-Sculpted Finish side. Components will extend beyond the perimeter of the tub. Call MTI for specific details regarding the desired installation before placing the order.
Radiance placed on floor locations will affect placement of air jets.
Hydrotherapy equipment may ship loose for remote installation. See package content on the following page for details.
Faucet valves cannot be installed on this tub model.
All tubs are compliant with ASTM C 1028-07 coefficient of friction. DoloMatte meets ANSI A137.1/A326.3 coefficient of friction and AS HB198:2014 slip tests.

Hydrotherapy Packages| Package Contents| Sculpted Finish Sides| Acrylic CXL®| DoloMatte®
---|---|---|---|---
Part #| MSRP| Part #| MSRP
Soaker| Soaking bath – no jets, pre-leveled foam base, factory installed rectangular overflow with toe tap drain| 4-sides sculpted| S102A4| $8,545| S102D4| $9,625
3-sides sculpted| S102A3| $7,900| S102D3| $8,845
2-sides sculpted| S102A2| $6,365| S102D2| $7,175
1-side sculpted| S102A1| $5,990| S102D1| $6,665
Microbubbles| 1 infusion port, microbubbles pump, pre-leveled foam base, factory installed rectangular overflow with toe tap drain| 4-sides sculpted| n/a| n/a| n/a| n/a
3-sides sculpted| M102A3| $10,890| M102D3| $11,835
2-sides sculpted| M102A2| $9,355| M102D2| $10,165
1-side sculpted| M102A1| $8,980| M102D1| $9,655
Air Massage| 20 air jets, heated air blower, pre-leveled foam base, factory installed rectangular overflow with toe tap drain| 4-sides sculpted| AST102A4| $11,830| AST102D4| $12,910
3-sides sculpted| AST102A3| $11,185| AST102D3| $12,130
2-sides sculpted| AST102A2| $9,650| AST102D2| $10,460
1-side sculpted| AST102A1| $9,275| AST102D1| $9,950
Air Massage Elite| 30 air jets, heated air blower, Chromatherapy LED lighting, Spa Mode, pre-leveled foam base, factory installed rectangular overflow with toe tap drain| 4-sides sculpted| AE102A4| $13,540| AE102D4| $14,620
3-sides sculpted| AE102A3| $12,895| AE102D3| $13,840
2-sides sculpted| AE102A2| $11,360| AE102D2| $12,170
1-side sculpted| AE102A1| $10,985| AE102D1| $11,660
Microbubbles with Air Massage| 1 infusion port, microbubbles pump, 20 air jets, heated air blower, pre-leveled foam base, factory installed rectangular overflow with toe tap drain| 4-sides sculpted| n/a| n/a| n/a| n/a
3-sides sculpted| ASTM102A3| $13,635| ASTM102D3| $14,580
2-sides sculpted| ASTM102A2| $12,100| ASTM102D2| $12,910
1-side sculpted| ASTM102A1| $11,725| ASTM102D1| $12,400
Microbubbles with Air Massage Elite| 1 infusion port, microbubbles pump, 30 air jets, heated air blower, Chromatherapy LED lighting, Spa Mode, pre-leveled foam base, factory installed rectangular overflow with toe tap drain| 4-sides sculpted| n/a| n/a| n/a| n/a
3-sides sculpted| AEM102A3| $15,255| AEM102D3| $16,200
2-sides sculpted| AEM102A2| $13,720| AEM102D2| $14,530
1-side sculpted| AEM102A1| $13,345| AEM102D1| $14,020

Microbubbles system components must be installed on a non-Sculpted Finish® side. Components will extend beyond the perimeter of the tub. Call MTI for specific details regarding the desired installation before placing order. For more customized applications, additional hydrotherapies may possibly be integrated in Sculpted Finish® tubs, depending on the types of therapy and the installation application. Visit mtibaths.com or call MTI at 800.783.8827.

RECOMMENDED SENSORY THERAPIES

Chromatherapy
(LE) $800 underwater lighting 2 LED lights included

Audiotherapy
(STEREOBT) $1,390 2 transducers with bluetooth and amplifier (BTREMOTE) $600 bluetooth remote (STEREOH202) $1,575 4 transducers amplifier not included

Thermaltherapy
(RAD100) $1,595 Radiance® 2 heated zones included
For more information on options and accessories go to Acrylic Tub Options on mtibaths.com

Options Must be ordered at time of purchase.

Standard Color White (CWH) gloss Acrylic CXL, matte DoloMatte
Textured, Slip-Resistant Bottom (TXTBTM) $105 DoloMatte® exceeds ANSI A137.1/A326.3 and AS HB198 slip tests.
Ozonator (OZONE) $515
Integral Armrests – 1 pair (INTARM) $140 end drain tub models
Installation Options Must be ordered at time of purchase.
Tile Flange
Factory Installed rigid ABS
1 Side (TFK1) $175
IMPORTANT: Must specify flange location(s) on order of Factory-Installed Flange.
2 Sides (TFK2) $185
3 Sides (TFK3) $200
Field Install Kit (TFKNI) $185
Includes rigid ABS & adhesive
Accessories

Pillows from $180
Teak Bath Mat (TKMAT3018) $815 Custom sizes also available. Contact MTI for details and pricing.
Teak Tub Tray Slatted (TK-TRAY1) $500 Solid (TK-TRAY2) $570
Teak Seat (TK-REMSEAT) $660 For use with armrests only.
Floor-Mounted High-Flow Tub Filler
Contemporary
Chrome (FILLC) $1,480
Brushed Nickel (FILLBN) $1,710

Drains & Overflow Kits Must be ordered at time of purchase

Toe Tap with Rectangular Overflow : PVC Drain Kit Overflow is factory installed
Chrome (WOTRC) included Brushed Nickel (WOTRBNU) substitute free of charge White (WOTRWU) $55 finish upcharge

Brass Body for Rectangular Overflow with Toe Tap
(WOTRSBU) $480 upcharge

Slim-Line Overflow with Toe Tap Drain Must be ordered at time of purchase

May upgrade rectangular overflow to Slim-Line Overflow
Low profile overflow is factory installed
Overflow measures 4.5” x 1”
Provides a deeper soak
Not available for commercial applications

Slim-Line Overflow with Toe Tap Drain

PVC Drain
Chrome (SLOTC) $500
Brushed Nickel (SLOTBN) $530
Polished Nickel (SLOTPN) $555
White (SLOTW) $430

Slim-Line Overflow with Toe Tap Drain

Solid Brass Drain
Chrome (SLOTSBC) $930
Brushed Nickel (SLOTSBBN) $935
Polished Nickel (SLOTSBPN) $935
White (SLOTSBW) $965

Certifications
The product is CSA Certified C/US and meets the standards of B45.5/IAPMO ANSI Z124.1 and ANSI 112.19.7.

Contact Information
For more details, please refer to the Installation & Operation Manual or contact MTI’s Customer Service at 800-783-8827 or [email protected]. Customer Service is available Monday-Friday from 8am-6pm EST.
©2023 by MTI Baths, Inc. Modification Rights Reserved

FAQ

Q: Can the tub be installed as a freestanding unit?
A: Yes, the tub can be installed as a freestanding model.
Q: What are the dimensions of the tub?
A: The tub has dimensions of 59.75 x 42 x 23.75 inches.
Q: What is the maximum capacity of the tub?
A: The tub can hold up to 116 gallons before overflowing.
Q: What is the weight of the tub?
A: The freestanding tub weighs 150 lbs / 68 kg, while the alcove tub weighs 169 lbs / 77 kg.