MTI Baths MBCR6036 Rectangular Drop-in Tub Instructions
- June 9, 2024
- MTI Baths
Table of Contents
MTI Baths MBCR6036 Rectangular Drop-in Tub
SPECIFICATION
- MBCR6036 60″ x 36″ x 20.75″
- Installation: Drop-In or undermount
- Material: Acrylic
- Plumbed Weight: 125 lbs / 57 kg
- Soaker Weight: 100 lbs / 45 kg
- Average Fill: 55 gal to above jet level
- Maximum Fill: 90 gal to overflow
Package Package Content Part #
Soaker
|
Soaking bath – No jets. Includes textured bottom.
| MBSCR6036
Air Bath
| 12 air jets, heated air blower, pre-leveled foam base and textured bottom. Pre-leveled foam base increases overall tub height 2”-3”|
MBACR6036
Whirlpool
|
6 point-massage jets, 1-bhp pump and textured bottom
|
MBWCR6036
Shown with Whirlpool Package
Important Ordering and Installation Information
- Before ordering or installing, consider access to equipment.
- Always measure tub on-site before building tub deck.
- Use proper bedding compound to fully level and support the tub.
- Tubs equipped with an air system or factory installed pre-leveled foam base are designed to install directly onto a flat level subfloor.
- Tub height is increasd up to 3” when equipped with factory-installed foam base.
- Location of all therapy components is predetermined and cannot be changed.
- Options listed cannot be combined with Designer Collection options.
- Before discarding tub crate, check for accessories that may be packaged inside.
- All product measurements are +1/2”.
- Specifications and configurations are subject to change without notice.
- Measurements herein supersede all others published prior to publication date below.
Options
- Must be ordered at time of purchase.
- Standard White (no charge)
- Color Upgrade: Biscuit (MTISCOLOR)
- Quick Ship / Priority Soaker & Whirlpool (QSHIPMTIS)Airbath (QSHIPMTISA)
- Inline Heater For Whirlpool (HTRMTIS) uses existing pump For Soaker & Air Bath (MBHTI SOAK) heater with recirculating pump
Accessories
Lift and Turn Drain & Overflow
Chrome (MBWOC), White (MBWOW), Brushed Nickel (MBWOBN)
Pillows
Soft Pillow White (MBPSW) Black (MBPSB) Roll-Up Pilow Light Aqua (MBPRUC)
Black (MBRUB)
Installation Options.
Must be ordered at time of purchase.
Tile Flange
- Factory-Installed rigid ABS
- 3 sides (MBTFK3), 2 sides (MBTFK2),
- 1 side (MBTFK1)
- Must specify flange location(s) on order.
Pre-Leveled Foam Base
- 5’ Tubs (MBPLFOAM)
- 5.5’ & 6’ Tubs (MBPLFOAM2)
- All airbaths include a pre-leveled foam base.
Pre-Leveled Frame and Foam Base with Skirting
- Raised Fixed Panel
- 5’ Tubs (MBFSKAO5), 5.5’ Tubs (MBFSKAO55), 6’ Tubs (MBFSKAO6)
- Raised Removable Panels
- 5’ Tubs (MBFSKAR5), 5.5’ Tubs (MBFSKAR55), 6’ Tubs (MBFSKAR6)
| Hydrotherapy Package | Components Included | GFCI / 110V |
|---|---|---|
| Soaker with Optional Inline Heater | ½-bhp pump, inline heater | 1-15 amp |
| Whirlpool or Air Bath | 1-bhp pump | 1-15 amp |
| Whirlpool with Optional Inline Heater | 1-bhp pump, inline heater | 1-20 amp |
| Air Bath with Optional Inline Heater | heated blower, ½-bhp pump, inline | |
| heater | 2-15 amp |
CSA Certified C/US; ANSI Z124.1 and ANSI 112.19.7
NOTE: Filling this tub to the maximum may require an above average size
or dedicated water heater.