MTI Baths 50 Designer Collection Tubs Installation Guide

June 11, 2024
MTI Baths

MTI Baths 50 Designer Collection Tubs

Designer Collection Tubs

Reflection 3

model 50

59.75″ x 41.5″ x 22.75″
DROP-IN (cannot be undermounted)

Not recommended as a tub / shower combination

85 gal to overflow

Acrylic CXL TM| DoloMatte TM
100 lbs / 45 kg       113 lbs / 51 kg

150 lbs / 68 kg      163 lbs / 74 kg

Filling this tub to the maximum may require an above average size or dedicated water heater.

IMPORTANT ORDERING & INSTALLATION INFORMATION

  • Before ordering or installing, please consider future access to equipment.
  • Add proper bedding compound to fully level and support bottom of tub.
  • When equipped with an air bath package, pre-leveled foam base or frame system, overall tub height is increased by approx. 2-3” and is designed to install on a flat, level subfloor.
  • Radiance placed on airbath floor will affect placement of air jets.
  • System components may extend beyond the perimeter of deck.
  • Please measure tub on-site before building tub decking.
  • Advise MTI when planning to use a glass enclosure. Relocation of controls may be necessary.
  • Suction and control locations may vary.
  • All tubs are compliant with ASTM C 1028-07 coefficient of friction. DoloMatte meets ANSI A137.1/ A326.3 coefficient of friction and AS HB198:2014 slip tests.

ELECTRICAL COMPONENTS & SPECIFICATIONS

Hydrotherapy Package Components Included GFCI / 110V
Standard Whirlpool 2-bhp pump 1-15 amp
Stream Bath ½-bhp, ozone 1-20 amp
Microbubbles Microbubbles pump 1-15 amp
Ultra Whirlpool 3-bhp pump, inline heater, ozone 2-15 amp
Air Massage heated blower 1-15 amp
Air Massage Elite heated blower, chromatherapy 1-15 amp
Air Massage w/ Stream Bath ½-bhp pump, heated blower, ozone 1-20 amp
Air Massage Elite w/ Stream Bath ½-bhp pump, heated blower,
chromatherapy, ozone 1-20 amp

Electrical requirements may change with the addition of optional therapy components. See specific option details or installation information.

CSA Certified C/US; B45.5/IAPMO ANSI Z124.1 and ANSI 112.19.7

CSA#MTDS-50
CSA#MTDS-50DM

Hydrotherapy Package Components Included GFCI / 110V
Microbubbles with Air Microbubbles pump, heated blower 1-20 amp
Microbubbles with Air Elite Microbubbles pump, heated blower,
chromatherapy 2-15 amp
Air with Whirlpool 2-bhp pump, heated blower 2-15 amp
Air with Ultra Whirlpool 3-bhp pump, inline heater, heated blower,
ozone 2-20 amp
Air Elite with Whirlpool 2-bhp pump, heated blower, chromatherapy 2-15

amp
Air Elite with Ultra Whirlpool| 3-bhp pump, inline heater, heated blower, chromatherapy, ozone| 2-20 amp

See the Installation & Operation Manual for more details.
MTI’s Customer Service Monday-Friday 8am-6pm EST
800-783-8827 or service@mtibaths.com

  • Before discarding tub crate, check for accessories that may be packaged inside.
  • All product measurements are +1/2”.
  • Specifications and configurations are subject to change without notice.
  • Measurements herein supersede all others published prior to publication date below.
  • Aromatherapy is eliminated for undermount applications
  • Air Baths, Pre-Leveled Foam Base or Frame Systems increase overall height by 2-3″.

model 50 59.75″ x 41.5″ x 22.75″

Hydrotherapy Packages| Package Contents| Acrylic CX L | DoloMatte
---|---|---|---
Part #| MSRP| Part #| MSRP
Soaker| Soaking bath – no jets|

S50

| $2,755|

S50DM

| $3,355
Stream Bath| 6 side vents, 2 end vents, 1/2 bhp pump, Ozone| SM50| $5,300| SM50DM| $5,900
Microbubbles| 1 microbubbles infusion port and pump| M50| $6,075| M50DM| $6,675
Air Massage| 20 air jets, heated air blower, Aromatherapy, pre-leveled foam base| AST50| $6,405| AST50DM| $7,005
Air Massage Elite| 30 air jets, heated air blower, Aromatherapy, Chromatherapy LED lighting, Spa Mode, pre-leveled foam base| AE50| $8,305| AE50DM| $8,905
Stream Bath with Air Massage| 6 side vents, 2 end vents, 1/2 bhp pump, Ozone, 20 air jets, heated air blower, Aromatherapy, pre-leveled foam base| ASTSM50| $8,450| ASTSM50DM| $9,050
Stream Bath with Air Massage Elite| 6 side vents, 2 end vents, 1/2 bhp pump, Ozone, 30 air jets, heated air blower, Aromatherapy, Chromatherapy LED lighting, Spa Mode, pre-leveled foam base|

AESM50

|

$10,550

|

AESM50DM

|

$11,150

Microbubbles with Air Massage| 1 microbubbles infusion port and pump, 20 air jets, heated air blower, Aromatherapy, pre-leveled foam base| ASTM50| $9,125| ASTM50DM| $9,725
Microbubbles with Air Massage Elite| 1 microbubbles infusion port and pump, 30 air jets, heated air blower, Aromatherapy, Chromatherapy LED lighting, Spa Mode, pre-leveled foam base|

AEM50

|

$10,925

|

AEM50DM

|

$11,525

Standard Whirlpool| 5 point-massage jets, 2-bhp pump| P50| $5,120| P50DM| $5,720
Ultra Whirlpool| 7 point-massage jets, 4 micro-jets, 3-bhp pump, inline heater, Ozone| P50U| $7,115| P50UDM| $7,715
Air Massage with Standard Whirlpool| 5 point-massage jets, 2-bhp pump, 20 air jets, heated air blower, Aromatherapy, pre-leveled foam base|

AW50

| $8,770|

AW50DM

| $9,370
Air Massage with Ultra Whirlpool| 7 point-massage jets, 4 micro-jets, 3-bhp pump, inline heater, 20 air jets, heated air blower, Aromatherapy, Ozone, pre- leveled foam base|

AU50

|

$10,765

|

AU50DM

|

$11,365

Air Massage Elite with Standard Whirlpool| 5 point-massage jets, 2-bhp pump, 30 air jets, heated air blower, Aromatherapy, Chromatherapy LED lighting, Spa Mode, pre-leveled foam base|

AEAP50

|

$10,670

|

AEAP50DM

|

$11,270

Air Massage Elite with Ultra Whirlpool| 7 point-massage jets, 4 micro-jets, 3-bhp pump, inline heater, 30 air jets, heated air blower, Aromatherapy, Ozone, Chromatherapy LED lighting, Spa Mode, pre-leveled foam base|

AEAP50U

|

$11,765

|

AEAP50UDM

|

$12,365

RECOMMENDED SENSORY THERAPIES
Chromatherapy
(LE) $800 underwater lighting
2 LED lights included

Audiotherapy
(STEREOBT) $1,390 2 transducers with bluetooth and amplifier
(BTREMOTE) $600 bluetooth remote
(STEREOH202) $1,575 4 transducers amplifier not included

Thermaltherapy
(RAD100) $1,595 Radiance®
2 heated zones included
(HTISOAK) $825

For more information on options and accessories go to Acrylic Tub Options at mtibaths.com

Options Must be ordered at time of purchase.

Standard Colors White (CWH) DoloMatte available in matte white only.

Biscuit (CBS) Not available for DoloMatte.

Quick Ship reduces lead time (QSPRI) $430

Please call for availability

Inline Heater maintains water temperature

For Soaker or Air Baths (HTISOAK) $825

Includes a recirculating pump

Cannot be combined with Microbubbles.

Virtual Spout high-flow integrated tub filler (FPMJ) $450

Must specify stub-out location on order. See page 1 for location options.

Grab Bars from $330

Selections vary. Personalization available.

Textured Bottom (TXTBTM) Acrylic CXL™ only $105

DoloMatte™ exceeds ANSI A137.1/A326.3 and AS HB198 slip tests.

Accessories
Pillows from $180
Teak Bath Mat (TKMAT3018) $815

Custom sizes also available. Contact MTI for details and pricing.

Hydrotherapy Equipment & Cleaning Systems

Must be ordered at time of purchase.


Inline Heater maintains water temperature

For Whirlpools or Stream Bath (HTI) $570

Uses existing pump

Cannot be combined with Microbubbles.

Whirlpool Cleaning Systems Fill-Flush (FFSO) $590 Simple Touch (FFE) $1,020

Must specify stub-out location on order. See page 1 for location options.

Whirlpool Jets Pump upgrade may be advisable for optimal performance when adding jets.

Point-Massage Jet

Extra Point-Massage Jet (EJ) $315 Micro-Jet from $360

Jet styles and packages vary. Personalization available.

Pump Upgrade – 3-bhp (PUMP3) $315

Jet Trim Kits

For Standard Whirlpool

Chrome (TRC) $270 , Brushed Nickel (TRBN) $725

For Ultra Whirlpool

Chrome (TRCU) $370 , Brushed Nickel (TRBNU) $960

Ozonator (OZONE) $515

Cannot be added to soakers or airbaths without combination hydrotherapy package or HTISOAK.

Installation Options

Must be ordered at time of purchase.

  • Pre-Leveled Foam Base (PLFOAM) $295
    All airbaths include a pre-leveled foam base.

  • Pre-Leveled Frame and Foam Base (PLF) $740

  • Pre-Leveled Frame and Foam Base with Skirting (Acrylic CXL™ tubs only)
    For pricing and details go to mtibaths.com

Tile Flange

  • Factory-Installed on 3 sides – rigid ABS (TFK3) $200
  • Field Install Kit – includes rigid ABS & adhesive (TFKNI) $185

IMPORTANT : Must specify flange location(s) on order of Factory-Installed Flange.
Not available with optional Low-Profile Rim.

Drains & Overflow Kits

Cable Driven

  • Drain Finishes – PVC Drain Kit
  • White/Bone/Biscuit (WOCDW) $440
  • Chrome (WOCD) $410
  • Brushed Nickel (WOCDBN) $490
  • Polished Nickel (WOCDPN) $540
  • Oil-Rubbed Bronze† (WOCDOR) $550
  • Polished Brass (WOCDBR) $690
  • Special Finishes* (WOCDSF) $1,135
  • MTI does not offer a brass body cable drain kit.

Lift & Turn

  • Drain Finishes – PVC Drain Kit
  • Chrome (WOC) $185
  • White (WOW) $245
  • Brushed Nickel (WOBN) $305

Toe Tap

  • Round Overflow – PVC Drain Kit
    • Chrome (WOTTC) $380
    • Brushed Nickel (WOTTBN) $385
    • Polished Nickel (WOTTPN) $385
    • Special Finishes* (WOTTSF) $1,145
  • Round Overflow – Solid Brass Drain
    • Chrome (WOTTSBC) $810
    • Brushed Nickel (WOTTSBBN) $810
    • Polished Nickel (WOTTSBPN) $810

† MTI has selected an oil-rubbed bronze finish that is compatible with Delta and many other manufacturers.
To ensure best match, order as a Special Finish and submit a sample.

  • Allow 2-4 weeks lead time for Special Finishes. Send sample for best match.
    ©2022 by MTI Baths, Inc. Modification Rights Reserved

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals