Fine Fixtures TLDGB 2 7 8 Inch Trip Lever Drain and Overflow Cover Instruction Manual
- June 15, 2024
- FINE FIXTURES
Table of Contents
Fine Fixtures TLDGB 2 7 8 Inch Trip Lever Drain and Overflow Cover
Instruction Manualc
DIMENSIONS/TECHNICAL DATA
ATTENTION! Dimensions may vary by up to 3/8″.
It is highly recommended to pull all dimensions of actual model for
installation and measuring purposes.
ITEM COMPONENTS
INSTRUCTIONS
- Remove screws (A) from old overflow plate (B)
- Detach plate from linkage (C) by removing cotter pin (D)
- Altach linkage to new overflow plate (B)
- Align screw holes on your new overflow plate and thread screws into place.
- Remove worm drain assembly by inserting handles of pliers (E) intodrain,engaging cross members and then unthreading the drain assembly (F).
- Thread bushing (G) into drain. Some narrow drains may not D-need a bushing.
- Spread an even layer of plumber’s putty under the lip of shoe (H) to provide seal
- Thread shoe (H) into drain Tighten so that lip of shoe is tight to drain and plumber’s putty forms a seal.
- Attach strainer plate (l) to shoe (H) with screw (J).
WARNING:
This product can expose you to chemicas including Cromum (heumalent compounds). which s known to the State of Califormia to cause cance and birth defects or other repreductive harm. For more intormation go to www.P65Warmings.ca.gov.
206 WEMBLY ROAD – NEW WINDSOR, NY 12553
P: 718.602.6060F: 718.963.2082-
E: INFO@FINEFIXTURES.COM
TOLL FREE: 1.877.8FIXTURES
FINEFIXTURES.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>