tuya 1080P VOLADOR Security Floodlight Camera Installation Guide

1080P VOLADOR Security Floodlight Camera
Installation Guide

Welcome
Thank you for choosing our Wifi Security Light.
Getting started is easy.

Parts Included

Product Details

Safety Instruction

IMPORTANT: Read before installing the fixture. Retain for future reference.

WARNING: Risk of Fire or Electric Shock

• Commercial installation, service, and maintenance of luminaries should be performed by a qualified licensed electrician. If you are unsure about the installation or maintenance of the luminaries, consult a qualified licensed electrician and check your local electrical code.
• Turn OFF the power at the fuse or circuit breaker before wiring the fixture to the power supply.
• Turn OFF power when you perform any maintenance.
• Verify that the supply voltage is correct by comparing it with the luminaire label.
• Risk of Burn. Disconnect power and allow the fixture to cool before handling.
• Clean glass lens with non-abrasive glass cleaning solution.
• Do not open the fixture to clean the LED. Do not touch the LED.

WIRING: If wiring does not include a ground wire, consult your local electrical code for approved grounding methods. For proper connection, place wire nut over wires and twist clockwise until tight.

Proper Installation Height

The proper installation height to optimize the motion sensor performance is around 2.5m (8ft)

Wall Mount (Built-in Junction Box)

Turn on power at the breaker

After connecting the power supply, the lights will turn on and your Wifi Security Light will begin speaking to you to let you know it’s in setup mode.

TROUBLESHOOTING

1. Check your power source.
2. Check electrical connections.
3. Check that the motion sensor is working properly.

Connection Preparation

Please install the security light with a camera within the WiFi-covered area to ensure the best working performance.

Note:

• Make sure the smartphone is connected to your wireless router.
• Please note the camera is only working under 2.4G Wi-Fi, not support 5G Wi-Fi.
• Smartphone ( IOS 9.0 or Android 4.4 system and higher version is available. Tablet PC, Mac, or Windows PC is not available.
  Please don’t use special characters, or symbols to name the WiFi and its Password.

Get the APP and Account

For the best experience, please download the ‘TuyaSmart’ APP to your smartphone from App Store or Google Play Store, or you can also scan the QR code below, the APP  icon will be displayed after installed successfully.

https://itunes.apple.com/us/app/tuyasmart-smart-life-smart- living/id1034649547?mt=8 
https://play.google.com/store/apps/details?id=com.tuya.smart

Launch the app from your smartphone and click to register and then sign in. Follow the on-screen instructions.

Connect the power to the camera

After installation, switch on the button.

Set up your camera

• Power the device on and make sure the indicator is red and flashing quickly or a prompt tone is heard.
• If the indicator is not red and flashing quickly, use the reset button to press the reset button of the camera above 5 seconds, then release the button, and a red LED on the front of the camera will blink quickly.
• Follow App’s instructions to complete the network pairing process, the device will connect to your Wi-Fi network successfully.
• The blue light is on, the camera is ready for viewing.

Micro SD card

• To ensure SD card video recording works steadily, we recommend Class 10 or higher speed Micro SD card.
• To make sure the device works normally, please format the SD card to FAT32 before the first time of use.
• Before inserting or pulling out the SD card, please power off the device.
• Insert the SD card properly into the slot as below.

APP Details

function settings”
Record| Video saved on mobile phone
Local video| Video recorded for motion or full time
Lamp| Switch on/off lamp manually
Alarm| Switch for motion detection
Motion| PIR motion zone settings
Alarm \ Motion\ Lamp| After setting alarm and motion zone. the lamp can be triggered to turn on automatically if the camera is in night vision mode
Buzzer| Enable manually. Can’t be triggered automatically

You’re done!
Congratulations! Your camera is set up and ready to go.

Appendix: Camera LED Guide

All trademarks are used for reference purposes only.
Thanks again for choosing our Floodlight camera! Make life safe in your hands!
Boost security mobility in your smartphone!

FAQ:

1. Can’t find SD card?
   First, we suggest these famous and popular brands, like Samsung, SanDisk, Kingston, etc. with at least class 10.
   Second, please format them to FAT32, this is the only format that the camera can support.

2. Floodlight can not turn on automatically?
   We designed it to be triggered only at night. Before that, please make sure “Alarm” and “Motion” are set well.
   Please also make sure the IR LED is turned on, which means the video is black and white.

3. The buzzer can not turn on automatically.
   Buzzers are designed to turn on manually to avoid disturbing your neighbors.

4. Two-way audio is not working?
   Please select “Two-way talk” first in “Settings-Basic function settings”

5. You can not get the video for a long time?
   Please first make sure this camera is installed as close as your router. Cameras are not suggested to install separately from the router for two thick walls.
   Please test your network and make sure it works well.
   For more questions, please send from the APP “Settings”-“FAQ&Feedback”

WARRANTY

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of (1) year from the date of original purchase by the consumer. The fixture is not warrantied for use in a commercial or retail application. The warranty is limited to use in a residential environment. We will repair or replace(at our option) the unit in the original color and style if available, or in a similar color and style if the original item has been discontinued, without charge. Defective units must be properly packed and returned to the manufacturer with a letter of explanation and your original purchase receipt showing the date of purchase.
Call 1-866-994-4148 to obtain a return authorization number and an address where to ship your defective product.
Note: C.O.D. shipments will NOT be accepted. The liability of the manufacturer is in any case limited to the replacement of the defective light fixture product. The manufacturer will not be liable for any other loss, damage, labor costs, or injury which is caused by the product. This limitation upon the liability of the manufacturer includes any loss, damage,  labor costs, or injury which is (1) to person or property or otherwise; (2) incidental or consequential in nature; (3) based upon theories of warranty, contract, negligence,  strict liability, tort, or otherwise; or (4) directly, or indirectly related to the sale, use, or repair of the product. This warranty gives you specific rights, and you may also have other rights which vary from state to state.

FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,  which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RF Exposure
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands is country-dependent and firmware is programmed at the factory to match the intended destination.
The firmware setting is not accessible by the end user.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>