Twinkle Star H4 9003 LED Fog Light Bulbs User Manual
- June 15, 2024
- Twinkle Star
Table of Contents
Twinkle Star H4 9003 LED Fog Light Bulbs
Safety and Notes
The “warning” and “notes” listed below are to ensure your safe and correct use of this product.
Warning:
- Please make sure that the motor Venice model matches the lamp model of this product.
- Please make sure the output voltage of motor vehicles or test instruments of the product should be within the scope of requirements limited by the product, so as to avoid accidents.
- Do not touch LED lamp beads (yellow area of amp holder)during alt he operation process. To avoid changes of light parameters and reduction of life. ln serious cases, LED will be damaged and the lamp will not work.
Note:
- Qualified professionals are recommended to install and test the products to avoid abnormal work and unpredictable problems.
- Before installation, make sure that the power has been disconnected and the engine has been turned off for more than half an hour. Parts that may come into contact should be cooled to ensure your safety.
- After loading the headlight body ensure that it fits in place with the lamp holder without looseness.
- Installation shall ensure that all connectors are connected correctly and the positive and negative plug-ins are connected in place without looseness.
- The temperature of LED headlight bulb may be very high after long time of working. Please do not touch it or test it near combustible materials.
- Ensure adequate ventilation-good heat dissipation prolongs product life.
- Power source must be DC 9-24V.
- Ensure all wire connections are correctly made before applying power.
- If a fault occurs, contact Twinkle Star Customer Services. Do not attempt to repair product yourself.
- Images shown are for illustration purposes and may not directly represent all models.
Installation instructions
- Rotate to remove of the light clasp
- Install the buckles on the booth and the light clasp Of the car lampshade.
- Fix the buckle and rotate the lamp body to install on the lamp holder.
- Connect the power plug to the original car socket
Applicable lamp model: H11 /HS/ H9 / 9005 / 9006 / 9012
-
Align the base and install the luminance (No need to attention to the slot butt remove the buckle) ** Package Included for H4
Package Included for H11
** -
Connect the power plug to the original car socket
-
Connect the power plug to the original car socket.
Troubleshooting
FEATURES
- Smart Cooling Fan
- 60,000 Hours
- Intelligent CSP
- IP68 Waterproof Rate
- Easy Installation
- High Lumens
Warranty
- Three Year Warranty is to the original purchaser. The warranty is for repair or replacement of parts and covers manufacturing faults only.
- Labor costs are not covered by warranty. Warranty does not cover parts that fail due to physical damage or damage from improper operation or electrical connection.
- Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
- Manufacturer is not liable for any incidental or consequential damages related to any breach of this warranty
WARRANTY REGISTRATION
REGISTER WITHIN 30 DAYS OF PURCHASE
Scan with Your Camera App to Register Your 3-Year Warranty or Contact Our
Customer Support Team for Any Product Issues!
Email : twinklestarllccs@gmail.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>