JVC HA-B5T True Wireless Earbuds Headphones Instruction Manual
- June 15, 2024
- JVC
Table of Contents
JVC HA-B5T True Wireless Earbuds Headphones
website: us.jvc.com
PRODUCT DESCRIPTION
- Charging Case
- Power Button Status LED
- Multi Function Button (MFB)
- Status LED
SPECIFICATIONS
- Wireless version: V5.O
- Wireless range: 10M
- Playtime: 4 Hours
- Charging Time: 1 hr earbuds 1.5 hr charging case
- Battery Capacity: Earbuds 30mAh Case 200mAh
- Operation Frequency: 2402-2480MHz
- Operational Temperature: -10 — 400C
- Charging Port: Type-C
PACKAGE CONTENTS
- Earbuds x 2
- Charging case x I
- Charging cable x 1
- User manual x I
- Earbuds caps:
- Size S x 2
- Size M x 2 (installed)
- Size L x 2
CHARGING THE EARBUDS
Put the earbuds into the charging case, the earbuds will be charged
automatically. The red status LED light will be on during charging
and will turn off when fully charged.
CHARGE THE CHARGING BOX
use a Type-C cable connected to a USB charger (DC 5V-1A) THE STEPS FOR DUAL
EARBUDS PAIRING (FIRST USE ONLY) Take out both earbuds from the charging case
the same time. LED light on both earbuds will be flashing blue & red at first.
One of the earbud’s LED light will turn Off after 2 seconds. It means that
both earbuds are ready to pair. Turn on the bluetooth on your device and
search for a new device then select “JVC HA-D5T ” to connect.
HOW TO RE-CONNECT
The earbuds will automatically try to reconnect with the last paired device
after restarting. If not, please put earbuds back to charging case and try
again or connect manually.
Caveats
- Never disassemble or modify your earbuds for any reasons to avoid any damages and danger.
- Do not store the earbuds and charging case in extreme temperatures (under 50C or over 3500.
- Avoid using the indicator close to the eyes of children or animals.
- DO not use this earbuds during a thunderstorm to avoid irregular function and increased risk Of electricshock.
- Do not use harsh chemicals or strong detergents to clean the earbuds.
- Keep the headset dry.
COMMON PROBLEMS AND SOLUTIONS:
-
The mobile phone cannot find the wireless earbuds
- Check whether the earbud’s power is switched On or not.
- Does the status LED light flicker red & blue alternatively?
If the wireless earbuds still have t been found after switching power On, please restart both the earbuds and the bluetooth search on your phone.
-
There is something wrong with the wireless earbuds while using it.
- Please try to re-connect with the mobile phone after turning it Off and restarting the earbuds.
- Check the charging status of the earbuds by putting them into the charging box until the red LED indicator is On. Then take them out and let them trying to re-connect with the mobile device.
-
The wireless earbuds always disconnect or make noise when connected to the mobile device.
- The wireless earbuds’ power status is low, please re-charge it.
- There is an obstruction between the mobile device and the wireless earbuds or the wireless distance is beyond signal range. Please do not cover the wireless earbuds with your hands in order to maintain the continuous stability Of the signal; please fry to keep the wireless earbuds and the mobile device in the same direction
FCC Statement
THS device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful Witerterence, and
- this device must accept any interference recorded, including interference that may cause undesired operation.
FCC CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under pat 15 ot the FCC Rules. These limits are designed to provide reasonable against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in æcordance With the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If tHs does cause harmful i&terence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced technician for
This transmitter must be co-located or operated in conjuction with any other
antenna or transmitter.
This experiment corresponds with FCC radiation exposure limits set forth for
an uncontrolled environment and meets the FCC Radio freqæncy (RF) Exposure
Guidelines as this equipment has very low levels of RF energy.
Tips:
- Before using the earbuds, please read the manual carefully and keep it for future references
- The earbuds need to be fully charged before first use.
- If the earbuds is left unused for over two weeks, please recharge it periodically.
- Please use the chargers made by a qualified manufacturer.
- If the earbuds cannot be found by your phone, please check whether it is in pairing mode; if left unconnected for a long while, the earbuds will exit pairing mode, please re-enter the mode; if a procedure error of your phone occurs, reboot it; if a procedure error of the earbuds occurs, reboot or rest it.
For Customer Use:
Enter the Model No. and Serial No. (on the charging case ) below.
Retain this information for future reference.
Model No.
Serial No.
Supplier’s Declaration of Conformity
Model Number : HA-D5T
Trade Name : JVC
Reponsible party : JVCKENWOOD USA Corporation
Address: 1440 Corporate Drive, Irving, TX 75038
Telephone Number: (678)449-8879
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC 10: 2A3ZO-HAB5T
ATTENTION :
The product you have purchased is powered by a rechargeble battery that is
recyclable. Please call 1-800-8—BATTERY for information on how to recycle this
MADE IN CHINA
Support
JVC IS HERETO HELP!
TOLL FREE: 1 (800)252-5722
http://www.us.jvc.com