BATAVIA BT-CDS001 MAXXPACK 18V Cordless Multi Sander Instruction Manual

BATAVIA BT-CDS001 MAXXPACK 18V Cordless Multi Sander

Dear customer
This multi sander is intended for dry sand-ing. It can be used for grinding flat wood, metal, or filler surfaces, for stripping rust or paint and for sanding basecoat.
Please familiarize yourself with the proper usage of the device by reading and following each chapter of this manual, in the order presented. Keep these operating instruc-tions for further reference.

Please read all safety instructions!
This manual contains important information on operating and handling the device. Keep these operating instructions for further reference. Please pass it on along with the unit if it is handed over to a third party. Battery and charger not included! The battery is available separately under art. No: 7062517 (2Ah), 7062518 (4Ah) or 7063735 (5Ah). The charger is available separately under art. No: 7063630 (1,65A), 7063688 (2,4A), 7062519 (3A) and 7063554 (4A). These items are available online and in participating stores.

Explanation of the symbols

The following symbols are used in the user manual or on the product:

• Warning! To reduce the risk of injury, the user must read the instruction manual.
• Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in this manual.
• Always wear hearing protection. The effects of noise can cause hearing loss.
• Wear a dust mask. When working with wood and other materials, harmful dust may be generated. Work with asbestos containing materials is not permitted!
• Wear safety glasses. When work-ing with electric power tools, sparks, splinters, chips and dust particles may be generated and these can cause loss of sight.
• CE stands for “Conformité Européenne”, which means “In accordance with EU Regulations”. With the CE marking, the manufac-turer confirms that this Electric tool complies with the applicable European directives.
• Do not dispose of electric power tools with domestic refuse.

Additional safety warnings for sanders

Contact with or inhalation of dust coming free during use (e.g. lead-painted surfaces, wood and metal) can endanger your health and the health of bystanders. Always wear appropriate protective equipment, such as a dust mask. Always use proper dust extraction during use.

• Do not work materials containing asbes-tos. Asbestos is considered carcinogenic.
• Do not use the machine for sanding magnesium workpieces.
• Wear safety goggles. Wear hearing pro-tection. If necessary, use other protective means, such as safety gloves, safety shoes, etc.
• Be very careful when sanding painted surfaces.
• Before use, remove all nails and other metal objects from the workpiece.
• Make sure that the workpiece is properly supported or fixed.
• Only use sanding paper that is suitable for use with the machine.
• Only use sanding paper with the correct dimensions. Make sure that the sanding paper is properly mounted.
• Inspect the sanding paper before each use. Do not use sanding paper that is worn because of prolonged use.
• Never put the machine down on a table or a workbench before it has been switched off.

Before the first use

Remove the machine and all accessories from the package. Keep the packaging materials out of the reach of small children. There is a danger of suffocation!

Contents of packing

• 1× Cordless multi sander
• 1× Dust collection box
• 1× Instruction manual

Intended use

The multi sander is intended for sanding wood, plastic, stone, composites, paint, filler, and similar materials. Metal and materials containing asbestos must not be worked with the multi sander. The multi sander is only intended for dry sanding.

Selecting the sanding paper

• Always use abrasive papers suited to the material you want to sand. The papers must have the correct grain size. The grain is either Corundum or silicon carbide.
• Depending on grain size there are degrees of coarseness. The coarseness is specified by a number on the back of the papers. The higher the number is, the finer the grain.
• It is important to use the right paper for each job. For rough sanding use grain sizes up to 80, for soft wood as larch, pine or spruce use papers from 120 to 150. For dense hardwood as beech or maple, the grain sizes up to 220 can be used

Attaching the sanding paper

Choose the sanding paper according to the material being worked.

• Attach the sanding paper to the sanding plate (7) and make sure the holes on the sanding paper fit with the openings on the base plate. Only this way the sanding dust can be extracted through the built-in dust removal in the sanding plate.
• Firmly press the sanding paper down on the sanding plate.

Assembling/Disassembling/Emptying the dust collection box

Always use the dust collection box (4) when sanding.

• Place the dust collection box onto the provided dust collection flange (5). Push the connection piece into the flange and turn it clockwise until it locks into place.
• To remove the dust collection box, turn the connection piece counter clockwise and pull it out of the flange. Preferably clean the dust collection box and the exhaust connection in the housing after each use. By doing this the dust collection box can be easily inserted and removed.
• For emptying the dust collection box,just tap out or, if available, clean with compressed air.

ON/OFF switch

• Insert the battery into the battery recess.
• To turn the machine on, set the ON/OFF switch (1) to I. To turn the machine off, set the ON/OFF switch to O.

Sanding

• Apply only moderate pressure on the machine. Too much pressure will lead to jamming of the mechanism and will spoil the result. Excessive pressure will over-heat the machine.
• Always select abrasive paper with coarseness suited the condition of the surface.
• Use finer papers in the consecutive sand-ing until the desired smoothness is reached. If you desire a very smooth finish you may slightly moisten the sur-face before the last sanding. This will slightly swell the fibres and allow a smoother finish.

Cleaning and Maintenance

Cleaning

• Remove the battery before undertaking any cleaning or maintenance work.
• Keep safety devices, ventilation openings and the motor housing as free as possi-ble from dirt and dust. Rub the electric power tool with a clean cloth or blow over it with low pressure compressed air.
• We recommend that you clean your elec-tric power tool immediately after each use.
• Clean the electric power tool regularly with a damp cloth and somewhat soft soap. Do not use any cleaning or solvent materials; these can attack the device’s plastic components. Make sure that no water can get inside the electric power tool.

Maintenance
There are no inner parts of the tool which need maintenance

Technical data

• No load speed: . . . . . . . . . . 12000 min-1
• Eccentricity: . . . . . . . . . . . . . . . 1 mm
• Sanding surface:. . . . . 140 × 140 × 80 mm
• Dimensions of sanding paper: . . . . . . . . . . . . . . . 140 × 140 × 80 mm
• Weight: . . . . . . . . . . . . . . . . . . 0.8 kg
• Weighted sound pressure level LpA: 70.3 dB(A)
• Uncertainty KpA: . . . . . . . . . . . . 3 dB(A)
• Weighted sound power level LWA: 81.3 dB(A)
• Uncertainty KWA: . . . . . . . . . . . . 3 dB(A)
• Hand/arm vibration:. . . . . . . 11.240 m/s2
• Uncertainty K: . . . . . . . . . . . . .1.5 m/s2

Vibration level
The vibration emission level stated in this instruction manual has been measured in accordance with a standardised test given in EN 60745; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned

• using the tool for different applications, or with different or poorly maintained accessories, may significantly increase the exposure level
• the times when the tool is switched off or when it is running but not actually doing the job, may significantly reduce the exposure level
  Protect yourself against the effects of vibra-tion by maintaining the tool and its accesso-ries, keeping your hands warm, and organiz-ing your work patterns.

Disposal

Do not dispose of electric power tools with domestic refuse. The electric power tool is shipped in packaging to reduce transport damage. This packaging is a raw material and as such can either be reused or can be fed back into the raw material cycle. The electric power tool and its accessories are made from vari-ous materials such as metals and plastics. Take defective components to a special refuse collection point. Ask about these at your specialist shop or local council.

Batteries
Think of the environment when disposing of batteries. Contact your local authorities to find out where your nearest disposal area is. Do not dispose of batteries with domestic refuse. Do not dispose of by burning, risk of explosion.

EC-Declaration of conformity

We, the Batavia B.V., Weth. Wassebali-estraat 6d, NL-7951 SN Staphorst, declare by our own responsibility that the product Cordless multi sander, Item-No 7063093, Model Nr. BT–CDS001 is according to the basic requirements, which are defined in the European Directives Electromagnetic Com-patibility 2014/30/EU (EMC), 2006/42/EC (Machinery), RoHS: 2011/65/EU and their amendments. For the evaluation of con-formity, the following harmonized standards were consulted:

• EN62841-1:2015

• EN62841-2-4:2014

• AfPS GS 2014:01

• EN55014-1:2017

• EN55014-2:2015
  Staphorst, 22 April 2020

• Meino Seinen, QA Representative Batavia B.V., Weth. Wassebaliestraat 6d, 7951 SN Staphorst, Netherlands

• The product and the user manual may be subject to changes. Technical data may be changed without prior notice.

References

• Home - Batavia B.V.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>