ROYAL KLUDGE RK-S98 Mechanical Keyboard Instruction Manual
- June 15, 2024
- ROYAL KLUDGE
Table of Contents
RK-S98 MECHANICAL KEYBORD
PRODUCT BASIC
WIRED CONNECTION
CLICKABLE SCROLL WHEEL
Volume calibration:
If the volume display is incorrect, it will be automatically calibrated after
the driver is turned on. Driver download address:
www.rkgaming.com
BLUETOOTH CONECTION
Bluetooth connection steps:
-
Set the side switch to ‘ON’ and turn the knob to select any of the Bluetooth icons:
Take BT1 for example,
Pairing: Turn the knob to select ; press and hold the knob, and the display shows indicating that it has entered the pairing state;
Linking: Turn the knob to select ; press the knob shortly, and the display shows indicating that it has entered the connection state; -
Turn on your device’s Bluetooth, search for this keyboard and connect, search for the name displayed: RK-S98 RGB.
-
After completing the connection, the display will automatically return to the main interface.
Similarly, repeat the above steps to store 3 groups of Bluetooth devices.
(Kindly Reminder: before switching, please pair 3 groups of Bluetooth in advance.)
2.4 GHZ CONNECTION
2.4g Connection Steps:
- The side switch is set to the ‘ON’ , and turn the knob to select 2.4G Icon:
- Press the knob shortly, the keyboard switched to 2.4G mode, and the display screen shows indicating that it has entered the connection state
- It displays once the connection is successful and automatically back to Home screen.
2.4G Pairing Steps:
- turn the knob to select 2.4G Icon:
- Press and hold the knob and the display shows , plug in the 2.4G dongle.
- It displays once the connection is successful and automatically back to Home screen.
(friendly reminder: Paired at the factory, no need to pair again)
FUNCTION KEY/DISPLAY OPERATION
CUSTOM BACKLIGHT SET
SPECIAL FUNCTION KEYS
MODE SWITCHING
INDICATOR LIGHT FUNCTION
MULTIMEDIA KEY FOR WINDOWS
MULTIMEDIA KEY FOR MAC
FCC COMPLIANCE STATEMENT ( USA only)
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
FCC COMPLIANCE STATEMENT (USA Only)
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by
the part responsible for compliance could void the user’s authority to operate
the equipment.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
ISED Statement
English:This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to
the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, inciuding interference that may
cause undesired operation of the device.
The device has been evaluated to meet general RF exposure requirement. This
equipment should be installed and operated with minimum distance Omm between
the radiator & your body. Sn a
Have an issue with one of our RK products?
Feel free to contact us with any product issues or questions.
We will reply as quickly as possible to ensure all your needs are handled.
Please contact the seller
Executive standard:GB/T 14081-2010
Made in China www.rkgaming.com