ROYAL KLUDGE RK S85 Mechanical Keyboard User Guide
- June 1, 2024
- ROYAL KLUDGE
Table of Contents
- ROYAL KLUDGE RK S85 Mechanical Keyboard
- Product Information
- Product Usage Instructions
- PRODUCT BASIC
- WIRED CONNECTION
- WIRED CONNECTION MANUAL TIME SETTING
- BT CONNECTION
- CONNECTION
- FUNCTION KEY/DISPLAY OPERATION
- BACKLIGHT CONTROL
- CUSTOM BACKLIGHT SET
- MULTIMEDIA KEY FOR WINDOWS
- MAC多媒体键
- FAQs
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ROYAL KLUDGE RK S85 Mechanical Keyboard
Product Information
Specifications:
- Product Name: RK S85 Mechanical Keyboard
- Model Number: 166-87901-02
- Backlight : RGB
- Connection: USB/2.4G/BT
- Layout: 85 keys
- Switch: Mechanical switches
Product Usage Instructions
Wired Connection:
To set up a wired connection, follow these steps:
- Toggle the switch to the middle position.
- Connect the USB Type-C cable to the device.
- Adjust volume using the clickable scroll knob.
- To set the time, press and hold the knob for 5 seconds to enter manual adjustment mode.
- Rotate the knob to adjust the year, date, and time.
- Press and hold the knob for 5 seconds to save and exit.
BT Connection:
To set up a Bluetooth connection, you can either use the knob or combination
keys:
- Set the switch to ‘B’ and use the knob to select pairing or reconnection.
- Or use combination keys (Fn+Q/W/E) for pairing or reconnection.
- Turn on your computer/mobile device’s Bluetooth and search for the keyboard. Connect to it with the displayed name: RK S85.
- After successful connection, the display screen will show ‘BT1 Success’.
Connection:
To set up a 2.4G connection, follow these steps:
- Set the switch to ‘G’ and use the knob to select 2.4G mode.
- Insert the 2.4G dongle into the device.
- The display screen will show ‘Success’ after a successful reconnection.
PRODUCT BASIC
WIRED CONNECTION
WIRED CONNECTION MANUAL TIME SETTING
Volume calibration:
If the volume display is incorrect, it will be automatically calibrated after
the driver is turned on. Driver download address:
www.rkgaming.com
Operations on the Time Main Interface:
- Press and hold the knob for approximately 5 seconds until the year starts flashing, entering the manual adjustment mode. Rotate the knob to adjust the numbers: Clockwise to increase, Counterclockwise to decrease.
- Press the knob in turn to adjust the Date(YY/MM/DD) and Time (HH/MM/SS) respectively. Similarly, rotate the knob to adjust the numbers: Clockwise to increase, Counterclockwise to decrease. After completing the settings, press and hold the knob once more for 5s to save and exit. Alternatively, you can short press Fn+T to quickly save and exit.
BT CONNECTION
BT connection with Knob:
Set the switch to ‘B’ and press the knob to access the menu. Use the knob to
select any of the following icons: ” ”
Paring: For example, using the knob to select ” ” and then press and hold
the knob. The screen will display ” ” to indicate the pairing process is
active.
Reconnection : For example, select “ ” using the knob and then press it
briefly. The screen will display “ ” to indicate the device has entered the
reconnection state.
BT connection with combination keys:
Set the switch to ‘B’,
Paring: Press and hold Fn+Q/W/E for 3 seconds, for example, long-press
Fn+Q, the display screen will show “ “, to indicate the pairing process is
active.
Reconnection: Press Fn+Q/W/E, for example, press Fn+Q briefly, The screen
will display ” ” to indicate the device has entered the reconnection state.
Turn on your computer/mobile device’s Bluetooth and search for the keyboard.
Connect to it with the displayed name: RK S85.
After the connection is successful, the display screen will show “ ” and
return to the Home screen automatically.
Similarly, follow the steps above to store 3 groups of different BT devices.
CONNECTION
4G connection with Knob:
- Set the switch to ‘G’ and press the knob to access the menu. Use the knob to select the following icon: ” “,
- Press the knob briefly to switch the keyboard to 2.4G mode, and the screen will display “ ” to indicate the keyboard is in a reconnection state, and then insert the 2.4G dongle.
- After a successful reconnection, the display screen will show “ ” and return to the Home screen automatically.
pairing with knob:
- Press the knob to access the menu. choose the icon ” ” and long-press the knob until the screen shows “ “, and then insert the 2.4G dongle.
- After a successful pairing, the display screen will show “ ” and return to the Home screen.
pairing with combination keys:
- Long-press Fn+P for 3 seconds until the display screen shows “ ” and then insert the receiver.
- After a successful pairing, the display screen will show ” ” and return to the Home screen.
Friendly reminder: The devices are already paired at the factory, so there is no need to pair them again.
FUNCTION KEY/DISPLAY OPERATION
BACKLIGHT CONTROL
CUSTOM BACKLIGHT SET
MULTIMEDIA KEY FOR WINDOWS
MAC多媒体键
FCC COMPLIANCE STATEMENT (USA only)
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a ClassB digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
- The device has been evaluated to meet general RF exposure requirements.
- The device can be used in portable exposure conditions without restriction.
ISED STATEMENT
This device contains licence-exempt transmitters)/receivers) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
Have an issue with one of our RK products?
Feel free to contact us with any product issues or questions. We will reply as
quickly as possible to ensure all your needs are handled. For better technical
support, please contact rkgaming@rkgaming.com
FAQs
Q: How do I adjust the volume on the keyboard?
A: You can adjust the volume using the clickable scroll knob. Clockwise
rotation increases the volume, while counterclockwise rotation decreases it.
Q: How do I save and exit after setting the time manually?
A: After completing the time settings, press and hold the knob for 5 seconds
to save and exit. Alternatively, you can press Fn+T to quickly save and exit.