WALI GSM001XL-P Single Monitor Arm Instruction Manual
- June 15, 2024
- WALI
Table of Contents
INSTALLATION MANUAL
Heavy-Duty Monitor Arm
GSM001XL-P Single Monitor Arm
GSM001XL-P
support@walielectric.com 
To properly balance the arm with monitor mounted, adjust the spring tension
using the supplied Allen Key as follows:
First, position and firmly hold the arm horizontally as shown. Ask for
assistance should you require it.
CAUTION: To avoid damage to monitor or mount, always keep the arm in a
horizontal position while making adjustments.
Again, ask for assistance if required.
If the arm drops, turn the adjustment screw counter-clockwise until it stays
in a horizontal position.
If the arm rises, turn the adjustment screw clockwise until it stays in a
horizontal position.
CAUTION:
DO NOT over tighten the screws.
IMPORTANT:
Failure to read, thoroughly understand, and follow all instructions can result
in serious personal injury, damage to equipment, or voiding of factory
warranty.
INSTRUCTIONS OF SAFETY AND WARNINGS:
- Make sure that the mounting surface is strong enough to handle a mounted product and equipment.
- DO NOT EXCEED THE MAXIMUM LISTED WEIGHT CAPACITY.
- Always use an assistant or a mechanical lifting device to safely lift and position heavy products.
- Tighten screws firmly, but do not over tighten. Over tightening can cause product damage that greatly reduces the holding power.
- Keep a clear area and distance from moving parts when using the product.
- Use only as intended. Never stand, hang or climb on the product.
- This product is intended for indoor use only.
- Any attempts to reconstruct the construction aren’t allowed.
- This product may contain small items that could be a choking hazard if swallowed. Keep children away unless the product is intended for their use and all instructions and manuals are fully reviewed and understood by them.
- Check that the product is secure and safe to use at regular intervals (at least every three months).
Should you ever have any questions or feel you require help please contact your place of purchase for assistance.