VEGA PROFESSIONAL VPVHT-06 Finish Hair Trimmer User Manual
- June 15, 2024
- VEGA PROFESSIONAL
Table of Contents
User Manual
Pro Finish Hair Trimmer
VPVHT-06
VPVHT-06 Finish Hair Trimmer
Important
- Please read this User Manual carefully before operating this appliance.
- While purchasing the hair trimmer appliance, please ensure that the warranty card is enclosed.
- Images used herein are digital depiction of the product and may differ from the physical product inside.
- Apply the oil to the trimmer blade before and after each use.
Thank you for selecting your Vega Professional Pro Finish hair trimmer. The
Vega Professional Pro Finish hair trimmer collection is an advanced line of
appliances, known for performance and reliability. This manual provides you
not only safety information but also important tips on handling your new Vega
Professional Pro Finish hair trimmer properly and how to take care of it.
The Vega Professional Pro Finish hair trimmer is ideal for haircuts and beard
trimming. The attachment combs can be changed depending upon short, medium and
long hair lengths
Unit Identification
A- Cutting head
B – On/Off switch
C – Power Indicator light
D – Power socket
E – Blade cover| F – Cleaning brush
G – Lubricating oil
H – Charging adapter
I- USB Cable
J- 4 Comb attachments
---|---
Important general safety instructions
Please note it is important to read this User Manual for all the safety instructions before using your VEGA hair trimmer appliance and save it for future reference or for any new user. Do not use the appliance if you do not understand or cannot read any instruction, direction, information, caution and warning given in this User Manual. The safety instructions explained in this User Manual help you to use the VEGA hair trimmer appliance safely and correctly and also to prevent you from injuring yourself or others.
Caution
- Never submerge the hair trimmer in water or any other liquid.
- Keep away from children.
- Hair trimmer may become warm during operation.
- When using, do not hold the cord, in order to prevent possible harm.
- Do not tamper with the moving parts.
- Clean the hair trimmer using only a damp cloth, never use a caustic solution.
- Check that the blades are not damaged or deformed before use.
- Terminate the usage when there is abnormality or failure.
- Do not disassemble the appliance. Take it to a Vega service person when service or repair is required.
Warning
- Always keep the hair trimmer dry.
- Keep this appliance out of the reach of children and infant.
- This appliance is not intended for use by persons (including children and infant) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given proper supervision and instruction concerning the use of this appliance by a person responsible for their safety.
- Children should be instructed and supervised to ensure that they do not touch or play with this appliance.
- Do not use this appliance near water or any other liquid.
- Never reach for any electrical appliance that has fallen into water or any other liquid. Immediately switch off the power supply at the main breaker and then unplug.
- Do not attempt to re-use the appliance if it has been submerged in water or any other liquid.
- Do not use this appliance near flammable substances such as benzene, aerosol cans, spray products or any other toiletries.
- To avoid any kind of damage to property, never leave this appliance unattended while it is turned on.
- Always unplug the appliance after use at the electrical socket if using with cord. This is important as even if the appliance is switched off, the electrical current still reaches the device.
- Use this appliance only for its intended use as described in this manual.
- Do not use any attachment/s or accessory/ies or part/s of any other manufacturer or any equipment that VEGA does not recommend.
- Do not use an extension cord to operate this appliance.
- Always inspect the appliance before use, pay attention to the condition of the cord, plug and blade.
- Do not use the appliance with a damaged cord or plug or blade.
- Do not use if the appliance has been dropped, left outdoors, submerged in water or if it is not working according to instructions.
- Do not use the appliance if it is not working properly or smells of burning. Stop using the appliance immediately.
- Avoid using thinner, benzene, or any other solvent to clean the appliance.
- We do not accept any responsibility for damage of the appliance, person/s, or other item/s caused by misuse, abuse or non compliance with the instructions mentioned in this User Manual.
Charging the battery
- Before the appliance is used for the first time, it should be charged for 2 hours. It then takes 1 hour to fully recharge the battery again.
- Connect the plug-in transformer to the appliance socket, and then to the mains socket.
- During charging, the charging indicator is illuminated. The charging indicator will begin to blink when almost fully charged and may shut off when fully charged.
Note: If the appliance is fully charged the charging indicator may not turn on. This does not indicate the appliance can no longer charge, it means the appliance does not need to draw electricity because it is already fully charged.
Mains operation
- Connect the plug-in transformer to the appliance socket.
- Connect the plug-in transformer to the mains socket. Switch on the appliance using the on/off switch and, after use, switch it off again.
CHANGING THE TRIMMER BLADE
- Switch Off the appliance using the ON/OFF switch.
- The blade set can be removed by sliding it away from the housing in the direction of the arrow.
- To replace the blade set, position it with the hook in the opening of the housing and press it onto the housing until it clicks into position
CUTTING WITH THE ATTACHMENT COMBS
Depending on the desired haircut, the equipment can be operated with or
without attachment combs.
Attachment combs #1 (1.5mm), #2 (4.5mm), #3 (6mm) and #4 (9mm) are available
as accessories.
| Comb No. | Resulting Hair Length (in inch) |
|---|---|
| 1 | 1.5 |
| 2 | 3 |
| 3 | 6 |
| 4 | 9 |
Tips
- The hair to be cut must be clean.
- Before operation, the cutting head should be oiled.
- Special care is required while using the appliance close to the ear and face.
- Use the hanging loop for easy storage.
Cleaning and Maintenance
- Make sure the appliance is switched off and disconnected from the mains.
- Remove the trimming comb.
- Putadrop of oil on blades for lubrication.
- Use the cleaning brush included to remove any residual hair from the cutting head.
- Donotclean the cutting head with water or any other fluid.
Environment
To protect the environment, don’t discard the appliance with the normal
household waste at the end of its life. You can discard the appliance at an
official collection point of recycling if any. By doing this, you can help to
preserve the environment and also some materials can be recycled or recovered
in this way.
Technical Specifications:
Power source: 110-240V~, 50/60Hz
Input Voltage: 5V **** 1A
Charge time: 90 Minutes
Run time: 90 Minutes
www.vega.co.in Vega Industries Private Limited
B-43, Sector-80, Phase-Il, Noida, U.P.- 201305 India