HIKVISION DS-2CD2146G2-ISU 2.8mm Camera User Guide
- June 15, 2024
- Hikvision
Table of Contents
HIKVISION DS-2CD2146G2-ISU 2.8mm Camera User Guide
Scan this QR and download the file on your computer desktop.
Step 1: Put the firmware file on your computer desktop
Step 2: decompress, please place the folder on the computer desktop.
Step 3: Open SADP software (official software, you can search and download from Google, or download from the official website)
Step 4: Information about this camera will appear on the page of SADP.
There is a box at the front of the camera information, please check it, enable
DHCP, and the click Refresh. Finally, copy the IP address of the camera.
Step 5 : Open a browser and enter the IP address of the camera. The
default account is admin and the password is set by yourself.
Step 6: Click Configuration and then Maintenance.
Step 7: Click Browse, select the folder extracted in step2, and then
click Upgrade. Click OK.
Note: The firmware is processing an update which may take several
minutes, please do not close this browser That’s all you have to do to update
your firmware.
If you have any questions, please feel free to contact our customer service or
technical support.
Technical Support
Contact : Deng
Email: support@monitech-cctv.com
Phone/WeChat: +8613750251651
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>